Vonyx VX820 Bruksanvisning

Läs nedan 📖 manual på svenska för Vonyx VX820 (24 sidor) i kategorin högtalare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
VX820 Column Speaker Set
Ref. nr.: 170.200
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽI
V1.0
2
ENGLISH
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the product is switched on for the rst
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the product into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the product to a rheostat or
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10- fuse. 16A
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the produ on and o. This ct
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his product is with speaker inside which can cause If t
magnetic eld. Keep the product at least 60cm away
from computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should
read and adhere to.
The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha
and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shi ing or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be pp
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
The label on the back/ der side the product indicates the mains voltage to which it must be connected. Check that the mains un of
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the m ns voltage and no dimmer or adjustable power supply may be used. ai
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
OPENING THE LID
Slide the locking handle to the inside, unlocking the lid. Turn over the lid to expose the control panel and column storage.
OVERVIEW
1. BT PAIR
Press to make BT streaming connection possible. When pressed, the VX820 is
ndable on the streaming device.
2. LINK (TWS/STEREO PAIRING)
When having two VX820 column speaker systems, it’s possible to initiate a link
(pairing) between the two by pressing this button on both systems. Both portable
systems will be emitting the same signal from the streaming audio function.
3. DSP PRESETS
Press to switch between presets (main, hi, monitor, dj and speech).
4. MASTER LEVEL
Rotate to adjust the master output level.
5. TREBLE
Rotate to adjust the treble (high tones) level of the corresponding channel.
6. BASS
Rotate to adjust the bass ( tones) level of the corresponding channel.low
7. CHANNEL VOLUME
Rotate to adjust the annel output volume level. ch
8. INPUT SWITCH
Toggle switch to change between dierent inputs for channel 1 and 2 (mic, guitar
and line).
9. NNEL 1 2 INPUT CHA AND
XLR and 6.3mm combo jack input connectors for connecting microphones,
guitars or to use as line input.
10. LINE/BT SWITCH
Press to toggle between line- and BT input modes.
11. CHANNEL 3/4 INPUT
RCA line input sockets for channel 3 and 4.
12. AUX INPUT
3.5mm auxiliary input jack to connect an external audio device ( - or MP3 players, etc. CD ).
13. MIX OUTPUT
XLR mix ouput socke t.
14. POWER INPUT
Socket for plugging in the supplied power cord.
15. POWER SWITCH
Press to turn the device on/o.

Produktspecifikationer

Varumärke: Vonyx
Kategori: högtalare
Modell: VX820

Behöver du hjälp?

Om du behöver hjälp med Vonyx VX820 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Vonyx Manualer

Vonyx

Vonyx VX820 Bruksanvisning

21 Oktober 2024
Vonyx

Vonyx SMN50 Bruksanvisning

21 September 2024
Vonyx

Vonyx SMN30 Bruksanvisning

21 September 2024
Vonyx

Vonyx Verve38 Bruksanvisning

21 September 2024
Vonyx

Vonyx SPLASH300 Bruksanvisning

17 September 2024
Vonyx

Vonyx SL15 Bruksanvisning

16 September 2024
Vonyx

Vonyx SL10 Bruksanvisning

16 September 2024
Vonyx

Vonyx VX210 Bruksanvisning

13 September 2024

högtalare Manualer

Nyaste högtalare Manualer