VTech VC7001 Bruksanvisning

VTech övervakningskamera VC7001

Läs nedan 📖 manual på svenska för VTech VC7001 (21 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/21

Congratulations

on purchasing your new VTech product.

Before using this product, please read

Important safety instructions.

This manual has instructions on how to set up

and register your new sensor. For instructions

on sensor settings, see the user’s manual that

came with your ULE compatible products. Visit

www.vtechphones.com/wireless-monitoring

for a list of the latest ULE compatible products.

You may also view or download the online

User’s manual of the respective product for a

full set of installation and operation instructions

at www.vtechcanada.com.

What’s in the box

Your product package contains the following

items. Save your sales receipt and original

packaging in the event warranty service is

necessary.

Sensor overview

1 – Latch button

Press to open the battery compartment

case.

2 – Back cover

3 – Pair button

Red for a second when the sensor is

powered on.

Press and hold to enter the registration

mode.

4 – LED light

Flashes red when the sensor is in the

registration mode.

5 – Battery compartment case

•

Before use

Install batteries to the sensor

NOTES

Use 2 x AAA batteries. Alkaline batteries are

recommended. If you use other kind of batteries,

the performance of the sensor varies.

Do not mix old and new batteries. Do not mix

alkaline, standard (Carbon-Zinc) or rechargeable

(Ni-Cad, Ni-Mh, etc) batteries.

While you insert the batteries, make sure the

polarities are correct.

The batteries operate properly under the

temperature between 0°F (-18°C) and 130°F (55°C).

Press the latch button on the sensor to

open the battery compartment case.

Insert two AAA alkaline batteries into the

battery compartment.

Add and register a sensor

Your new Garage Door Sensor VC7001

can be registered to any ULE compatible

product.

respective ULE compatible product before use.

Enter the registration mode by selecting

the option for adding a sensor to your ULE

compatible product. Refer to the user’s

manual of your ULE compatible product for

more detailed instructions.

Press and hold the pair button on the

Garage Door Sensor, until the LED light

ﬂashes red, to enter the registration mode.

When the registration process is complete,

the red LED light on the sensor will remain

steady for about two seconds, and then

turn off. The registration process takes

about 90 seconds to complete.

•

NOTE

You can also download online User’s manuals at

http://www.vtechcanada.com/.

Replacing a sensor

If you have purchased this new VC7001

accessory sensor to replace an old sensor,

follow the instructions to deregister your old

sensor.

To replace a sensor, you must deregister the

registered sensor ﬁrst, and then register this

new sensor to your ULE compatible product.

Deregister a sensor or all sensors:

Refer to the online User’s manual of your

ULE compatible product at

www.vtechphones.com/support/manuals

to deregister a sensor or all sensors.

Check the sensor before use

1. Hold the sensor and tilt it to 90 degrees,

with the logo facing downward.

You will receive alerts at your ULE

compatible product. Refer to the

Installation guide or User’s manual of

your ULE compatible product for the

sensor alerts.

2. Tilt the sensor to 90 degrees to the original

upright position.

NOTE

There is a component inside this sensor to detect

orientation. It is normal to hear a rattling sound

when tilted.

•

Test the sensor signal strength

You can mount the Garage Door Sensor on a

garage door that raises overhead.

Before mounting the sensor, make sure you

test if the location you install the sensor is in

range from your ULE compatible product.

1. Take the sensor to the desired mounting

location on the garage door, and use

adhesive tape to hold it temporarily in place.

2. Enter the signal checking or testing mode

at your ULE compatible product to test the

sensor signal strength.

3. Open the garage door again to make sure

you receive alerts at your ULE compatible

product.

NOTES

If you do not receive an alert when you open the

garage door, move your ULE compatible product

closer to the garage or move the sensor closer to

the respective product.

Depending on surroundings and obstructing

factors, like concrete garage walls, a tall metal

storage cabinet, or an SUV, the sensor may not

transmit to the base properly.

After testing the sensor signal strength, mark

the mounting location on the door, window,

or medicine cabinet and its respective frame.

Then, remove the adhesive tape and proceed

to the mounting process.

•

Mount the sensor

NOTE

Make sure the mounting surface is clean.

A textured surface or any imperfections to

a smooth surface can keep the mounting tape

from making a strong bond.

TIP

You can choose to mount the sensor with the

mounting tape ﬁrst, and then use screws later if

you decide to mount it at that location for long term.

Mount with tape

1. Attach the mounting tape onto the

rectangular area of the back cover, and

then stick the Garage Door Sensor onto the

garage door.

2. Firmly press the sensor for 30 seconds to

ensure full contact on the surface area.

Mount with screws

1. Press the latch button on the sensor to

open the battery compartment case.

2. Use the two holes on the back cover to mark

the desired location of the garage door.

3. Remove the back cover and drill two holes

into the garage door.

•

4. Align the holes on the back cover of the

sensor with the holes on the garage door.

Stick the back cover onto the door. Tighten

the screws into the holes to secure the back

cover onto the garage door.

TIP

You may also choose to attach the mounting tape

onto the back cover to strengthen the bond, if

necessary.

5. Push the battery compartment case back

to the back cover on the garage door until it

clicks into place.

•

General product care

Taking care of your sensor

Your sensor contains sophisticated electronic parts,

so it must be treated with care.

Avoid rough treatment

Place the sensor down gently. Save the original

packing materials to protect your sensor if you ever

need to ship it.

Avoid water

Your sensor can be damaged if it gets wet. Do not

use the sensor outdoors in the rain, or handle it with

wet hands. Do not install the sensor near a sink,

bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power surges

harmful to electronic equipment. For your own safety,

take caution when using electrical appliances during

storms.

Cleaning your sensor

Your sensor has a durable plastic casing that should

retain its luster for many years. Clean it only with a

dry non-abrasive cloth. Do not usedampened cloth or

cleaning solvents of any kind.

Storage

When you are not going to use the sensor for some

time, remove the battery from the sensor. Store the

sensor in a cool and dry place.

Go to www.vtechcanada.com

to register your product for

enhanced warranty support and

the latest VTech product news.

VC7001

Accessory Garage Door Sensor

for use with

ULE certiﬁed systems*

User’s manual

(Canada version)

User’s manual

Garage Door Sensor Double-sided

mounting tape

AAA battery x 2 Screw x 2

User’s manual

* Visit for the latest ULE compatible products.www.vtechphones.com/wireless-monitoring

NOTE

The garage images in this manual are for conceptual

reference only.

•

Frequently asked questions

Below are the questions most frequently asked about

the sensor. If you cannot ﬁnd the answer

to your question, visit our website at

www.vtechcanada.com or call 1-800-267-7377 for

customer service.

The sensor

does not

work at all.

Make sure two AAA alkaline

batteries are installed.

The sensor may be deregistered

from the telephone base. Register

it back to your ULE compatible

product.

The sensor may be out of range.

Move the sensor closer to your

ULE compatible product.

Important safety instructions

When using your equipment, basic safety precautions

should always be followed to reduce the risk of ﬁre,

electric shock and injury, including the following:

Adult setup is required.

Do not use this product near water. For example,

do not use it next to a bath tub, wash bowl,

kitchen sink, laundry tub or swimming pool, or in

a wet basement or shower.

Do not place this product on an unstable table,

shelf, stand or other unstable surfaces.

This product should not be placed in any area

where proper ventilation is not provided. Slots

and openings in the back or bottom of this

product are provided for ventilation. To protect

them from overheating, these openings must

not be blocked by placing the product on a soft

surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator or

heat register.

Never push objects of any kind into this product

through the slots because they may touch

dangerous voltage points or create a short

circuit. Never spill liquid of any kind on the

product.

To reduce the risk of electric shock, do not

disassemble this product, but take it to an

authorized service facility. Opening or removing

parts of the product other than speciﬁed access

doors may expose you to dangerous voltages

or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently

used.

Periodically examine all components for damage.

Children should be supervised to ensure that

they do not play with the product.

The product is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance by a

person responsible for their safety.

SAVE THESE INSTRUCTIONS

Battery

CAUTION: Use only the batteries indicated in

this manual. There may be a risk of explosion if a

wrong type of battery is used for the sensor unit.

Do not dispose of the battery in a ﬁre. Check

with local waste management codes for special

disposal instructions.

Do not open or mutilate the battery. Released

electrolyte is corrosive and may cause burns or

injury to the eyes or skin. The electrolyte may be

toxic if swallowed.

Exercise care in handling batteries in order not to

create a short circuit with conductive materials.

Precautions for users of implanted cardiac

pacemakers

Cardiac pacemakers (applies only to digital

cordless devices):

Wireless Technology Research, LLC (WTR), an

independent research entity, led a multidisciplinary

evaluation of the interference between portable

wireless devices and implanted cardiac pacemakers.

Supported by the U.S. Food and Drug Administration,

WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches

from the pacemaker.

Should NOT place wireless devices directly over

the pacemaker, such as in a breast pocket, when

it is turned ON.

WTR’s evaluation did not identify any risk to

bystanders with pacemakers from other persons

using wireless devices.

FCC and IC regulations

FCC Part 15

This equipment has been tested and found to comply

with the requirements for a Class B digital device

under Part 15 of the Federal Communications

Commission (FCC) rules. These requirements are

intended to provide reasonable protection against

•

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

Changes or modiﬁcations to this equipment not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

To ensure safety of users, the FCC has established

criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander

according to the intended usage of the product. This

product has been tested and found to comply with

the FCC criteria. The sensor unit shall be installed

and used such that parts of all persons’ body are

maintained at a distance of approximately 8 in

(20 cm) or more.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

Industry Canada

This device complies with Industry Canada

licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

The term ‘’IC:‘’ before the certiﬁcation/registration

number only signiﬁes that the Industry Canada

technical speciﬁcations were met.

This product meets the applicable Industry Canada

technical speciﬁcations.

•

RF radiation exposure statement

The sensor complies with FCC RF radiation exposure

limits set forth for an uncontrolled environment. The

sensor unit should be installed and operated with

a minimum distance of 8 in (20 cm) between the

sensor and all persons’ body. This transmitter must

not be co-located or operating in conjunction with

any other antenna or transmitter. This equipment

complies also with Industry Canada RSS-102 with

respect to Canada’s Health Code 6 for Exposure of

Humans to RF Fields.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to

the holder of a valid proof of purchase (“Consumer”

or “you”) that the Product and all accessories

provided in the sales package (“Product”) are

free from defects in material and workmanship,

pursuant to the following terms and conditions,

when installed and used normally and in accordance

with the Product operating instructions. This limited

warranty extends only to the Consumer for Products

purchased and used in the United States of America

and Canada.

What will VTech do if the Product is not free from

defects in materials and workmanship during

the limited warranty period (“Materially Defective

Product”)?

During the limited warranty period, VTech’s

authorized service representative will repair or

replace at VTech’s option, without charge, a

Materially Defective Product. If we repair the Product,

we may use new or refurbished replacement parts.

If we choose to replace the Product, we may replace

it with a new or refurbished Product of the same

or similar design. We will retain defective parts,

modules, or equipment. Repair or replacement of

the Product, at VTech’s option, is your exclusive

remedy. VTech will return the repaired or

replacement Products to you in working condition.

You should expect the repair or replacement to take

approximately 30 days.

How long is the limited warranty period?

The limited warranty period for the Product extends

for ONE (1) YEAR from the date of purchase. If

VTech repairs or replaces a Materially Defective

Product under the terms of this limited warranty,

this limited warranty also applies to the repaired

or replacement Product for a period of either (a)

90 days from the date the repaired or replacement

Product is shipped to you or (b) the time remaining on

the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, ﬁre, water or other

liquid intrusion; or

Product that has been damaged due to repair,

alteration or modiﬁcation by anyone other than

an authorized service representative of VTech; or

Product to the extent that the problem experienced

is caused by signal conditions, network reliability,

or cable or antenna systems; or

Product to the extent that the problem is caused

by use with non-VTech accessories; or

Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered

illegible; or

Product purchased, used, serviced, or shipped

for repair from outside the United States of

America or Canada, or used for commercial or

institutional purposes (including but not limited to

Products used for rental purposes); or

Product returned without a valid proof of

purchase (see item 2 on the next column); or

Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service, please visit our website

at www.vtechcanada.com or call 1-800-267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls and

features may save you a service call.

Except as provided by applicable law, you assume

the risk of loss or damage during transit and

transportation and are responsible for delivery or

handling charges incurred in the transport of the

Product(s) to the service location. VTech will return

repaired or replaced Product under this limited

warranty. Transportation, delivery or handling

charges are prepaid. VTech assumes no risk for

damage or loss of the Product in transit. If the

Product failure is not covered by this limited warranty,

or proof of purchase does not meet the terms of

this limited warranty, VTech will notify you and will

request that you authorize the cost of repair prior

to any further repair activity. You must pay for the

cost of repair and return shipping costs for the repair

of Products that are not covered by this limited

warranty.

What must you return with the Product to get

warranty service?

Return the entire original package and

contents including the Product to the VTech

service location along with a description of the

malfunction or difﬁculty; and

Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product

model) and the date of purchase or receipt; and

Provide your name, complete and correct

mailing address, and telephone number.

Other limitations

This warranty is the complete and exclusive

agreement between you and VTech. It supersedes

all other written or oral communications related to

this Product. VTech provides no other warranties for

this Product. The warranty exclusively describes all

of VTech’s responsibilities regarding the Product.

There are no other express warranties. No one

is authorized to make modiﬁcations to this limited

warranty and you should not rely on any such

modiﬁcation.

State/Provincial Law Rights: This warranty gives you

speciﬁc legal rights, and you may also have other

rights, which vary from state to state or province to

province.

Limitations: Implied warranties, including those of

ﬁtness for a particular purpose and merchantability

(an unwritten warranty that the Product is ﬁt for

ordinary use) are limited to one year from the date

of purchase. Some states/provinces do not allow

limitations on how long an implied warranty lasts,

so the above limitation may not apply to you. In no

event shall VTech be liable for any indirect, special,

incidental, consequential, or similar damages

(including, but not limited to lost proﬁts or revenue,

inability to use the Product or other associated

equipment, the cost of substitute equipment, and

claims by third parties) resulting from the use of this

Product. Some states/provinces do not allow the

exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may

not apply to you.

Please retain your original sales receipt

as proof of purchase.

Technical specifications

Frequency

control

Crystal controlled PLL synthesizer

Transmit

frequency

1921.536-1928.448 MHz

Channels 5

Sensor

operating

temperature

0°F (-18°C) to 130°F (55°C)

Nominal

effective

range

Maximum power allowed by FCC

and IC. Actual operating range

may vary according to environment

conditions at the time of use.

Power

requirements

2 x AAA alkaline batteries

Disclaimer

This product is not designed for security purposes.

When properly installed and maintained, this product

may in some cases reduce the risk of burglary, ﬁre,

robbery or other events occurring without providing

an alarm. VTech is not responsible for losses, injury,

or damage resulting from the use of this product.

This product is covered by U.S. Patent #8,825,043.

Other patents may be pending.

VTech Communications, Inc.

A member of THE VTECH GROUP OF COMPANIES.

VTech is a registered trademark of VTech Holdings Limited.

Speciﬁcations are subject to change without notice.

Designed to ﬁt your home.

And your life.

Produktspecifikationer

Varumärke:	VTech
Kategori:	övervakningskamera
Modell:	VC7001

Behöver du hjälp?

Om du behöver hjälp med VTech VC7001 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

övervakningskamera VTech Manualer

VTech VC7002 Bruksanvisning

14 December 2024

VTech VC7001 Bruksanvisning

14 December 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Bolin Technology FEX-SN-M02202021 Bruksanvisning

17 December 2024

I-PRO WV-X15500-V3L Bruksanvisning

17 December 2024

I-PRO WV-X15700-V2LN Bruksanvisning

17 December 2024

I-PRO WV-X22500-V3L Bruksanvisning

17 December 2024

I-PRO WV-S2536LA Bruksanvisning

17 December 2024

I-PRO WV-S2536LTA Bruksanvisning

17 December 2024

I-PRO WV-S25500-F3L Bruksanvisning

17 December 2024

I-PRO WV-S25500-F6L Bruksanvisning

17 December 2024

I-PRO WV-S25600-V2L Bruksanvisning

17 December 2024

I-PRO WV-S25500-V3L Bruksanvisning

17 December 2024