Wagner SprayTech HT3500 Bruksanvisning
Wagner SprayTech
varmepistol
HT3500
Läs nedan 📖 manual på svenska för Wagner SprayTech HT3500 (32 sidor) i kategorin varmepistol. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/32
EnglishFrançaisEspañol
0908 • Form No. 0503703C
Heat Gun
HT3500
Owner’s Manual
Read all instructions and product labels. When using
electrical tools, follow all precautions to reduce the
risk of re, electric shock, and other personal injury.
1-800-727-4023
Wagner Technical Service
http://www.wagnerspraytech.com
Register your product online at:
Need help? Call us first for answers fast.
Call Wagner toll-free if you have any comments
or problems with this Wagner product.
1770 Fernbrook Lane, Plymouth, MN 55447
56M8
English
2
General Description
This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.
Specications
Housing: ............................Engineered high-impact corrosion and heat-resistant polymers
Wattage: ...............................................1500 watts on highest setting, 150 watts on lowest
Heat Output: ......
Approximately approximately 1350°F on highest setting, 250°F on lowest
BTU: ..............................................................Approximately 5100 BTUs on highest setting
Weight: .............................................................................................................. 1.5 pounds
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove oor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic lm for wrapping or weatherproong
• Loosen rusted nuts, bolts and ttings
Touch pad
The electronic touch pad gives you a wide temperature range to choose from, depending
upon the type of project.
HIGH
LOW
1350
1250
1150
1050
950
850
750
650
550
450
350
250
POWER
COOL
HIGH
LOW
SELECT
Power
button
Temperature
selector
Select
button
Mode
indicator
Temperature
indicator (6)
IMPORTANT!
The temperature
indicators will light up
sequentially as you
increase the
temperature. The
lighted indicator
farthest to the right will
reflect the current
temperature setting.
Power button: Turns the heat gun ON and OFF
Select button: Determines the temperature range and fan speed of the heat
gun, or switches the heat tool into cool down mode.
Temperature selectors: Sets the temperature within the HIGH or LOW temperature
ranges
Mode indicator: Shows the temperature range in which you are operating
Temperature indicator: Shows the current heat output of the heat gun
English
3
Important Safety Information • Read all safety information
before operating the equipment. Save these instructions
To reduce the risks of re or explosion, electrical shock and the injury to persons,
read and understand all instructions included in this manual. Be familiar with the
controls and proper usage of the equipment.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
HAZARD: POISON
Extreme care should be taken when stripping paint. The peelings, residue and vapors of
paint may contain lead, which is poisonous. Any paint applied to homes before 1950 is
likely to contain lead. Any paint manufactured before 1977 may contain lead. Once the
paint is deposited on surfaces, hand-to-mouth contact can result in the ingestion of lead.
Exposure to even low levels of lead can cause irreversible brain and nervous system
damage. Young and unborn children are particularly vulnerable to lead poisoning.
Before beginning any paint removal process you should determine whether the paint
you are removing contains lead. This can be done by your local health department or
by a professional who uses a paint analyzer to check the lead content of the paint to be
removed. Lead-based paint should only be removed by a professional and should not be
removed using a heat gun.
PREVENTION:
1. Move the work piece outdoors. If this is not possible, keep the work area well
ventilated. Open the windows and put an exhaust fan in one of them. Be sure the
fan is moving the air from inside to outside.
2. Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air
ducts.
3. Place drop cloths in the work area to catch any paint chips or peelings. Wear
protective clothing such as extra work shirts, overalls and hats.
4. Work in one room at a time. Furnishings should be removed or placed in the
center of the room and covered. Work areas should be sealed off from the rest of
the dwelling by sealing doorways with drop cloths.
5. Children, pregnant or potentially pregnant women and nursing mothers should not
be present in the work area until the work is done and all cleanup is complete.
6. Wear a dust respirator mask of a dual lter respirator mask for dust and fumes
which has been approved by the Occupational Safety and Health Administration
(OSHA) the National Institute of Safety and Health (NIOSH), or the United States
Bureau of Mines. These masks and replaceable lters are readily available at
major hardware stores. Be sure that the mask ts properly. Beards and facial hair
may keep masks from sealing properly. Change the lters often. Disposable paper
masks are not adequate.
7. Use caution when operating the heat gun. Keep the heat gun moving as excessive
heat will generate fumes which can be inhaled by the operator.
8. Keep food and drink out of the work area. Wash hands, arms and face and rinse
mouth before eating or drinking. Do not smoke or chew gum or tobacco in the work
area.
9. Clean up all removed paint and dust by wet mopping the oors. Use a wet cloth
to clean all walls, sills and any other surface where paint dust is clinging. Do
not sweep, dry dust or vacuum. Use a high phosphate detergent of trisodium
phosphate (TSP) to wash and mop areas.
10. At the end of each work session, put the paint chips and debris in a double plastic
bag, close it with tape or twist ties and dispose of properly.
11. Remove protective clothing and work shoes in the work area to avoid carrying dust
into the rest of the building. Wash work clothes separately. Wipe shoes off with
a wet rag and then wash it with the work clothes. Wash hair and body thoroughly
with soap and water.
Produktspecifikationer
| Varumärke: | Wagner SprayTech |
| Kategori: | varmepistol |
| Modell: | HT3500 |
Behöver du hjälp?
Om du behöver hjälp med Wagner SprayTech HT3500 ställ en fråga nedan och andra användare kommer att svara dig
varmepistol Wagner SprayTech Manualer
4 September 2024
varmepistol Manualer
- varmepistol Hyundai
- varmepistol Steinel
- varmepistol Kinzo
- varmepistol Bruder Mannesmann
- varmepistol Batavia
- varmepistol Duro Pro
Nyaste varmepistol Manualer
20 September 2024
15 September 2024
10 September 2024
10 September 2024
8 September 2024
31 Augusti 2024
20 Augusti 2024