WayteQ X820 Bruksanvisning

Läs nedan 📖 manual på svenska för WayteQ X820 (11 sidor) i kategorin Navigering. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/11
WayteQ GPS Navigation
X820
User Manual
Version 1.0
Precaution and Notice
The PND is used only as a navigation aid. It is not for precise measurement of direction, distance, location or
topography. The user must follow all traffic signs and local regulations along the roads.
GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or
building, GPS position is not available.
A minimum of 4 GPS satellite signals are needed to determine current location. Signal reception can be
affected by situations such as bad weather or dense overhead obstacles (e.g. tall buildings).
Other wireless devices in the vehicle might interfere with the reception of satellite signals and cause the
reception to be unstable.
When you get out of the car, do not leave your PND on the dashboard or subject to direct sunlight. The
overheating of the battery may cause malfunctions and/or dangerous conditions.
For your own safety, do not operate the controls of the PND while driving. Do not mount where the driver’s field
of vision is blocked.
Basic Introduction
1.1 Overview
A. Charging Indication
B. Speaker
C. Power
D. 2.5mm Earphone Socket
E. Memory Card Slot
F. Mini USB
G. Stylus Pen Slot
H. Battery
Once the card is installed, it cannot be removed during the operation of the device.
If you need to remove the card, switch the unit off first, push the card in and it will eject from the slot.
1.2 Charging by Car Charger
Caution: To protect your device against suddenness, please connect the car charger only after the car engine has been
started.
1.3 USB Cable
The USB cable is provided for system upgrades and battery charging . This USB cable will work on the PC either with
Microsoft Active Sync® or as a mess storage media. You can select the mode in the “Setting-USB” menu.
1.4 Install the Car Cradle and Bracket
Take off the protection film on the bottom of the suction. Then put the bracket onto a suitable location of your
windscreen or side window and make sure the suction or windscreen is clean without water or any dirty things . Never
place the stand where the driver's field of vision is blocked.
Install the device bracket into the car cradle, after adjust of the angle and direction of the PND, rotate the screw to lock
onto windscreen.
1.5 AC-DC Charger optional
Main Functions Introduction
1. Starting Up and Power Off
Long press the “Power” button to power the equipment on and you can see the main interface as below :
Long press the “Power” button again to enter into the below interface :
Tap the “Power off” button to turn the unit off.
Tap the “Sleep” button to enter a suspend state and the system stops operation.
Tap the “Cancel” button to turn back to the screen.
2. GPS Navigation
Double tap the “GPS” icon to start navigation program.
3. Media
Tap the icon "Media" on the main menu and enter into the below interface :

Produktspecifikationer

Varumärke: WayteQ
Kategori: Navigering
Modell: X820

Behöver du hjälp?

Om du behöver hjälp med WayteQ X820 ställ en fråga nedan och andra användare kommer att svara dig




Navigering WayteQ Manualer

WayteQ

WayteQ X880 Bruksanvisning

15 September 2024
WayteQ

WayteQ X920 Bruksanvisning

14 September 2024
WayteQ

WayteQ X820 Bruksanvisning

14 September 2024
WayteQ

WayteQ X850 Bruksanvisning

14 September 2024
WayteQ

WayteQ X950HD Bruksanvisning

14 September 2024

Navigering Manualer

Nyaste Navigering Manualer