Wells H63CD Bruksanvisning

Wells Ugn H63CD

Läs nedan 📖 manual på svenska för Wells H63CD (20 sidor) i kategorin Ugn. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/20

WELLS MANUFACTURING

265 Hobson Street, Smithville, Tennessee 37166

telephone: (800) 264-7827

www.wells .com-mfg

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

OWNERS MANUAL

for

BUILT-IN

ELECTRIC

HOTPLATES

Models:

H336, H636 and

H706

Includes

INSTALLATION

USE & CARE

EXPLODED VIEW

PARTS LIST

WIRING DIAGRAM

222

2M-303734 REV F (03-22)

Model H336

Model H706

LIMITED EQUIPMENT WARRANTY

Wells WellsManufacturing warrants to the original purchaser of new

products to be free from defects in material or workmanship, under normal

and proper use and maintenance service as specified by and upon Wells

proper installation and start up in accordance with the instructions -

supplied with each obligation under this warranty is Wells unit. Wells’

limited to a period of one [1] year from the date of original installation, or

eighteen [18] months from original whichever occurs firstinvoice date, .

Defects that occur as a result of normal use, within the time period and

limitations defined in this warranty, will at Wells’ discretion have the parts

replaced or repaired by or a authorized service agency.Wells Wells-

THIS WARRANTY IS SUBJECT TO ALL LISTED CONDITIONS

Repairs performed under this warranty are to be performed by a Wells

authorized service agency. will not be responsible for charges Wells

incurred or service performed by non authorized repair agencies. In all -

cases, the nearest authorized service agWells- ency must be used. Wells will

be responsible for normal labor charges incurred in the repair or

replacement of a warrantied product within 50 miles (80.5 km) of an

authorized service agency. Time and expense charges for anything beyond

that distance will be the responsibility of the owner. All labor will need to

be performed during regular service hours. Any overtime premium will be

charged to the owner. For all shipments outside the U.S.A. and Canada,

please see the International Warranty for specific details. It is the

responsibility of the owner to inspect and report any shipping damage

claims, hidden or otherwise, promptly following delivery. No mileage or

travel charges will be honored on any equipment that is deemed portable.

In general, equipment with a cord and plug weighing less than 50 lb. (22.7

kg) is considered portable and should be taken or shipped to the closest

authorized service agency, transportation prepaid.

CONTACT

Should you require any assistance regarding the operation or maintenance

of any our service deparWells Manufacturing; phone or email tment. In all

correspondence provide the model number and serial number of the unit

needing service the voltage or gas type.; include

Normal Business Hours: 8:00 a.m. to 4:30 p.m. Central

Telephone: 800-264 7827 - Tech Service Option 2

Email: TechService@partstown.com

www.Wells-Mfg.com

WARRANTY EXCLUSIONS

THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.

Wells’ sole obligation under this warranty is limited to either repair or

replacement parts, subject to the additional limitations detailed

below. This warranty neither assumes nor authorizes any person to

assume obligations other than those expressly covered by this

warranty.

• Any product which has not been used, maintained, or installed in

accordance with the directions published in the appropriate

installation sheet and/or owner’s manual, including incorrect gas or

electrical connection. Wells is not liable for any unit which has been

mishandled, abused, misapplied, subjected to harsh chemicals,

modified by unauthorized personnel, damaged by flood, fire, or other

acts of nature [or God], or which have an altered or missing serial

number.

• Installation, labor, and job checkouts, calibration of heat controls,

air and gas burner/bypass/pilot adjustments, gas or electrical system

checks, voltage and phase conversions, cleaning of equipment, or

seasoning of griddle surface.

• Replacement of fuses or resetting of circuit breakers, safety

controls, or reset buttons.

• Replacement of broken or damaged glass components, quartz

heating elements, and light bulbs.

• Labor charges for all removable and consumable parts in gas

charbroilers and hotplates, including but not limited to burners,

grates, and radiants.

• Any labor charges incurred by delays, waiting time, or operating

restrictions that hinder a service technician’s ability to perform

service.

• Replacement of to normal wearparts that fail or are damaged due

or labor for replacement of parts replaced during a daily that can be

cleaning routine, such as but not limited to silicone belts, PTFE non-

stick sheets, control labels, knobs, bulbs, fuses, quartz heating

elements, baskets, racks, and grease drawers.

• Any economic loss of business or profits.

• No OEM parts. Use of nonn- - OEM parts without Wells’ approval will

void the warranty.

• Units exceeding one [1] year from original installation date, or more

than eighteen [18] months from original date, whicheverinvoice

comes first.

ADDITIONAL WARRANTIES

• -Specific/chain specific equipment may have additional and/or

extended warranties.

The foregoing warranty is in lieu of any and all other warran�es

expressed or implied and cons�tutes the en�re warranty.

222 p/n 2M-303734 Owners Manual Built-In Hotplates

WARRANTY

SPECIFICATIONS 1

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 3

AGENCY APPROVAL INFORMATION 3

INSTALLATION 4

OPERATION 5

CLEANING INSTRUCTIONS 6

TROUBLESHOOTING 7

EXPLODED VIEW & PARTS LIST 8

PARTS & SERVICE 12 - 17

WIRING DIAGRAM 18 - 19

CUSTOMER SERVICE DATA 19

TABLE OF CONTENTS

SPECIFICATIONS

Proper installation, professional operation and consistent maintenance of this equipment will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this equipment, and to use and care for

the equipment in a manner which will ensure its optimum performance.

INTRODUCTION

MODEL ELEMENT VOLTS AMPS kW *DIMENSIONS

H336 Single 8” Coil 208 V 1ø 9.4 A 2.0 kW 10” outside diameter

240 V 1ø 10.8A 2.6 kW

H636 Dual 8” Coils 208 V 1ø 18.8 A 3.9 kW 14-3/4” W x 23-1/2” D

240 V 1ø 21.7 A 5.2 kW

H706 Dual 9” french plates 208 V 1ø 14.4 A 3.0 kW 14-3/4” W x 23-1/2” D

240 V 1ø 16.7 A 4.0 kW

Refer to Installation Instructions for cutout dimensions.

Produktspecifikationer

Varumärke:	Wells
Kategori:	Ugn
Modell:	H63CD
Vikt:	465 g
Bredd:	305 mm
Djup:	244 mm
Höjd:	70 mm
Ethernet LAN:	Ja
Antal USB 2.0-portar:	4
Antal HDMI-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Processoruttag:	Socket AM4
Processorfabrikant:	AMD
Maximalt internminne:	128 GB
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ C:	1
Ljudutgångskanaler:	7.1 kanalen
ETC:	Ja
Ethernet-gränssnittstyp:	2.5 Gigabit Ethernet
Chipset moderkort:	AMD B550
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ A:	1
Typ av minnesplats:	DIMM
Ljudchip:	Realtek ALC1220
Medföljande drivrutiner:	Ja
S/PDIF-utgång:	Ja
Minneskanal:	Dubbelkanaals
Gränssnitt för lagringsenheter som stöds:	M.2, SATA III
PS/2-port(ar):	1
Komponent för:	PC
LAN-kontroller:	Dragon RTL8125BG
Antal SATA III-kontakter:	6
Icke-ECC:	Ja
Vakna på LAN:	Ja
Kompatibla processorer:	AMD Ryzen 3 3rd Gen, AMD Ryzen 5 3rd Gen, AMD Ryzen 7 3rd Gen, AMD Ryzen 9 3rd Gen
Minnestyper som stöds:	DDR4-SDRAM
Max. antal SMP-processorer:	1
Wifi:	Nee
Harmoniserad systemkod (HS):	84733020
Moderkort chipset familj:	AMD
Moderkorts formfaktor:	ATX
Antal minnesplatser:	4
Minnesklockhastigheter som stöds:	2133,2400,2667,2933,3200,3466,3600,3733,3800,3866,4000,4133,4200,4266,4333,4400,4466,4533,4600,4666,4733 MHz
BIOS-typ:	UEFI AMI
Anslutning för CPU-kylare:	Ja
ATX-strömkontakt (24-stift):	Ja
USB 2.0-anslutningar:	2
Obuffrat minne:	Ja
USB 3.2 Gen 1 (3.1 Gen 1) anslutningar:	1
EPS-strömkontakt (8-stift):	Ja
Perifera (Molex) strömkontakter (4-stift):	1
USB 3.2-kontakter (3.1 Gen 2):	1