Wells HDHP2430G Bruksanvisning

Wells Ugn HDHP2430G

Läs nedan 📖 manual på svenska för Wells HDHP2430G (32 sidor) i kategorin Ugn. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/32
WELLS BLOOMFIELD, LLC
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
MODELS
HDHP1230G
HDSU1230G
HDHP2430G
HDSU2430G
HDHP3630G
HDSU3630G
Includes
INSTALLATION
USE & CARE
p/n 2M-306627 Rev. F M226 101109
FOR YOUR SAFETY
Do not store gasoline or other flammable liquids
in the vicinity of this or any other appliance.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and mainte-
nance instructions thoroughly before installing or servicing this equipment.
IMPORTANT:
The purchaser of this equipment must post in a prominent location instructions to be followed in the
event the user smells gas. This information shall be obtained by consulting the local gas supplier.
Model HDHP3630G
226
OPERATION MANUAL
HEAVY DUTY GAS HOTPLATE
ENGLISH
226 306627 OpManual for HDHP-Series Hot Plates
Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship for
a period of one year from the date of original installation or
18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT,
INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God. It also
does not apply if the serial nameplate has been removed, or
if service is performed by unauthorized personnel. The pric-
es charged by Wells Manufacturing for its products are
based upon the limitations in this warranty. Seller’s obliga-
tion under this warranty is limited to the repair of defects
without charge by a Wells Manufacturing factory authorized
service agency or one of its sub-service agencies. This
service will be provided on customer’s premises for non-
portable models. Portable models (a device with a cord and
plug) must be taken or shipped to the closest authorized
service agency, transportation charges prepaid, for service.
In addition to restrictions contained in this warranty, specific
limitations are shown in the Service Policy and Procedure
Guide. Wells Manufacturing authorized service agencies
are located in principal cities. This warranty is valid in the
United States and Canada and void elsewhere. Please
consult your classified telephone directory, your foodservice
equipment dealer or contact:
Service Department, Wells Manufacturing
10 Sunnen Dr., St. Louis, MO 63143
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
ENGLISH
ENGLISH
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 8
CLEANING INSTRUCTIONS 10
TROUBLESHOOTING SUGGESTIONS 12
PARTS & SERVICE 13
CUSTOMER SERVICE DATA 13
EXPLODED VIEW & PARTS LIST 15
FRANÇAIS
DESCRIPTION ET AVERTISSEMENTS DE SÛRETÉ 16
SPÉCIFICATIONS 17
FONCTIONNALITÉS ET COMMANDES 18
PRÉCAUTIONS & RENSEIGNEMENTS D’ORDRE
GÉNÉRAL 19
INFORMATIONS CONCERNANT LES AGENCES 19
INSTALLATION 20
FONCTIONNEMENT 24
INSTRUCTIONS POUR LE NETTOYAGE 26
CONSEILS POUR LE DÉPANNAGE 28
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
1
MODEL STYLE FUEL MANIFOLD
PRESSURE
Total B.T.U.
per HOUR
HDHP1230G
HDSU1230G
2 Burners w/
Individual Control
Natural Gas 5.0” W.C. 53,000
Propane (LP) 10” W.C.
HDHP2430G
HDSU2430G
4 Burners w/
Individual Control
Natural Gas 5.0” W.C. 106,000
Propane (LP) 10” W.C.
HDHP3630G
HDSU3630G
6 Burners w/
Individual Control
Natural Gas 5.0” W.C. 159,000
Propane (LP) 10” W.C.
44,670
89,330
134,000
226 306627 OpManual for HDHP-Series Hot Plates

Produktspecifikationer

Varumärke: Wells
Kategori: Ugn
Modell: HDHP2430G

Behöver du hjälp?

Om du behöver hjälp med Wells HDHP2430G ställ en fråga nedan och andra användare kommer att svara dig


Ugn Wells Manualer

Wells

Wells HDHP2430G Bruksanvisning

8 Januari 2025
Wells

Wells H63 Bruksanvisning

7 September 2024
Wells

Wells H2412G Bruksanvisning

4 September 2024
Wells

Wells HDHP3630G Bruksanvisning

2 September 2024
Wells

Wells HC1256 Bruksanvisning

2 September 2024
Wells

Wells H33 Bruksanvisning

31 Augusti 2024
Wells

Wells OC1 Bruksanvisning

31 Augusti 2024
Wells

Wells HC1006- Bruksanvisning

31 Augusti 2024
Wells

Wells H636 Bruksanvisning

29 Augusti 2024
Wells

Wells H63CD Bruksanvisning

24 Augusti 2024

Ugn Manualer

Nyaste Ugn Manualer

Bosch

Bosch CMA585GS0 Bruksanvisning

16 Januari 2025
Bauknecht

Bauknecht BLVE 8200 Bruksanvisning

16 Januari 2025
Siemens

Siemens BF834LGW1 Bruksanvisning

16 Januari 2025
Tefal

Tefal 18 Liter Bruksanvisning

16 Januari 2025
Tefal

Tefal 5221 Bruksanvisning

16 Januari 2025
Tefal

Tefal 5221 Grill Bakoven Cleantech 26 L - draaispi Bruksanvisning

16 Januari 2025
Samsung

Samsung BF3C4T047 Bruksanvisning

16 Januari 2025
Zanussi

Zanussi hm 92 pw pn px Bruksanvisning

16 Januari 2025
Whirlpool

Whirlpool acm 841 Bruksanvisning

16 Januari 2025
Unold

Unold 68855 Bruksanvisning

16 Januari 2025