Whirlpool AWOC 8283 Bruksanvisning

Whirlpool tvättmaskin AWOC 8283

Läs nedan 📖 manual på svenska för Whirlpool AWOC 8283 (2 sidor) i kategorin tvättmaskin. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

GB PROGRAMME CHART

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the

washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are

washed according to the instructions on the garment label and those issued in this programme chart. M0702

❉:optional / Yes : dosing required

1) For improved garment care, spin speed is restricted in these programmes.

5019 300 00220

Whirlpool is a registered trademark of Whirlpool USA

Programme

Tempe-

rature Care

Labels

Max.

Load

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Detergents and additives Selectable options Cycle

end Max.

Spin

Speed

rpm

Pre-

wash

Main

wash

Softener Pre-

wash

Rapid Clean + Cold

wash 15°

Intensive

rinse

Easy

ironing

Rinse

hold

Spin

Mixed 40 °C

4.0 Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. —Yes ❉—— — ❉❉❉❉❉❉

max.

Cotton 40 - 60 - 95 °C

8.0 Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen. ❉Yes ❉❉❉❉ ❉ ❉ ❉❉❉❉

max.

Synthetics 30 - 40 °C

3.0 Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or

their blends with cotton. ❉Yes ❉❉❉❉ ❉ ❉ ❉❉❉❉

max.

Delicates 30 °C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. ❉Yes ❉❉—— ❉——❉❉❉

1000 1)

Wool/

Handwash cold - 40 °C 1.0

Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles

made of silk (keep to care label!), linen, wool and viscose marked as handwashable.

This programme, at 40 °C, is tested and approved by The Woolmark Company for machine- and

handwashable wool. Select spin speed according to the manufacturer's recommendations on the care label.

—Yes ❉—— — ❉——❉❉❉

1000 1)

White 40 °C 8.0 Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product,

in addition to your detergent. —Yes ❉—— ❉❉ ❉❉❉❉❉

max.

Light

colours 40 °C 4.0 White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent,

if necessary also stain removers or bleaches on oxygen basis.

❉Yes ❉❉—❉❉——❉❉❉

1000 1)

Dark 40 °C 4.0 Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid

detergent for dark garments with this programme.

❉Yes ❉❉❉—❉❉—❉❉❉

1000 1)

EcoCotton 40 - 60 °C 8.0 Normally soiled cotton laundry.

At 40°C and 60°C most favourable programme in terms of combined water and energy

consumption for washing cotton laundry. - Reference programme for the Energy Label. —Yes ❉—— — ❉❉—❉❉❉

max.

Speed 15 30 °C 3.0 Briefly worn clothing made of cotton, artificial fibres and blends with cotton.

Refresh programme. Use lowest recommended detergent amount. —Yes ❉—— — ❉——❉❉❉

max.

Rinse & Spin ——

8.0 Rinse and intensive spin programme.

Same as the last rinse and the final spin in the “Cotton” programme. —— ❉—— — — ❉—❉❉❉

max.

Spin ——

8.0 Intensive spin programme.

Same as the spin cycle in the “Cotton” programme. —— — —— — — — — — ❉❉max.

Drain ———

Drain only - no spinning.

Alternative method of terminating programme after “Rinse Hold”. —— — —— — — — — ——❉—

A. “Door open” indicator

This washing machine is equipped with automatic

safety functions which detect and diagnose faults

at an early stage and react appropriately, e.g.:

B. “Service” indicator

C. “Water tap closed” indicator

D. “Clean pump” indicator

E. Programme selector

F. “Start/Pause” button

G. “Cycle end” button

H. “Spin” button

I. Eco monitor

J. “Reset” button

}

Fabrics Colours Eco

5019 300 00220

Whirlpool is a registered trademark of Whirlpool USA

Load the laundry, add detergent and turn the programme selector to

the desired programme and temperature; the “Start/Pause”

indicator blinks. The spin speed shown on the display can be

altered by pressing the “Spin” button .

When a combination of programme/option or option/option is

not possible, the indicator switches off automatically. Unsuitable

combinations of options are deselected automatically.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand or

granular dirt).

• Do not use liquid detergent for the main wash when

activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 95°C.

“Clean +” button

• Choose this option if you use an in-wash additive for stain

removal (powder, for example “Vanish”) - it will optimize the

additive’s efficiency to get better wash performance and

stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together with

your detergent (only use powder detergent with this option).

Respect the manufacturer’s dosing instructions.

• May prolong the programme by up to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

basis. Chlorine or perborate bleaches must not be used!

“Cold wash 15°” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20°C).

• Not selectable for Cotton 95°C.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water

or for washing baby linen, and helps people with allergies.

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very

gentle spin.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

• The programme stops to “Rinse hold” at the time the “Rinse

hold” indicator on the display blinks. The “Start/Pause”

indicator blinks as well.

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

without “Rapid” with “Rapid”

Mixed 40 4.0 48 0.50 1:00 —

Cotton 95 8.0 82** 2.50 2:30 —

Cotton 60 8.0 59 1.36 2:20 1:35

Cotton 40 8.0 75 0.80 2:05 1:15

Synthetics 40 3.0 42 0.50 1:20 0:55

Delicates 30 1.5 60 0.40 0:46 —

Wool/Handwash 40 1.0 45 0.55 0:40 —

White 40 8.0 77 0.85 2:20 —

Light colours 40 4.0 60 0.45 1:20 —

Dark 40 4.0 40 0.55 1:40 1:15

EcoCotton*60 8.0 59 0.98 4:00 —

EcoCotton*60 4.0 40 0.75 3:15*** —

EcoCotton*40 4.0 45 0.62 3:00*** —

Speed 15 30 3.0 25 0.15 0:15 —

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual

water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.

15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water

supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.

Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options

or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

*Reference programmes for Energy Label.

LOAD LAUNDRY, ADD DETERGENT AND

SELECT PROGRAMME

SELECT ANY DESIRED OPTION

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the programme

selector to the “Drain” programme and press the “Start/

Pause” button to start draining.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled

and the water is drained out only. However, intermediate

spin phases remain during the rinse.

With this function you can postpone your programme to

complete at a later time: press the button to select in how many

hours the programme shall be finished.

Thus, it allows you to have your laundry ready at a particular time

and to profit from more favourable energy rates during the night,

for example.

• The time until the “Cycle end” can be selected in full hour time

segments (1 to 24 h). When you press the button, the shortest

possible time will be displayed; keep on pressing the button

to loop through all the available times. To remove it again,

keep on pressing the button until you see the value “0:00”.

• When you have selected the desired time until the “Cycle

end”, press “Start/Pause” - the countdown will begin.

• During the countdown, you can still modify the programme

setting (select or deselect options, change spin speed etc.). If

the modifications prolong the programme duration so that it

overruns the originally set time until the “Cycle end”, the

programme will start immediately.

• Sometimes the programme may finish before the selected

time until the “Cycle end” has expired (e.g. for small loads). In

this case, the washing machine will tumble the laundry

regularly to keep it fresh, until the selected “Cycle end” time

has expired. During tumbling, the display will show an

animation. The tumbling phase can be stopped at any time

either by pressing any button or by rotating the programme

selector; the animation will stop and the door will unlock in

about 1 minute as indicated on the display.

Before starting and after end of a programme, the lamp lights to

show that the door can be opened.

As long as a wash programme is running, the door remains locked

and must on no account be forced open. In case you have an urgent

need to open it during a running programme, refer to “Reset a

running programme before the end”.

The “Eco monitor” gives you a rough feedback about the power

consumption of the programme setting you selected.

As soon as you turn the programme selector to any programme, the

“Eco monitor” is on.

The indicator on the left is to show that the “Eco monitor” is active.

The four indicators next to it show the degree of consumption: the

less power your programme setting is forecasted to consume, the

less indicators will light up. This depends on the programme,

temperature and options selected, and also on the size of the wash

load. For that reason, the forecasted degree of power consumption

may adapt when the washing machine detects the wash load.

Open the tap and press the “Start/Pause” button . The

indicator next to the “Start/Pause” button lights up. When

the laundry load is detected or the programme duration is

adapted, the display shows an animation.

If one of the failure indicators blinks, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient inlet water.

“Service”: failure or malfunction of an electrical

component.

“Clean pump”: waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning.

The “Door open” indicator lights up, and the display shows “End”.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the “Start/Pause” button to pause the

programme. The indicator blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds; an

animation appears on the display. The water is drained; it

may last some time until you can open the door.

SET CYCLE END

“DOOR OPEN” INDICATOR

ECO MONITOR

PROGRAMME START

FAILURE INDICATORS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

RESET A RUNNING PROGRAMME BEFORE

THE END

less more

- the sensor technology adapts water, energy and programme duration to the size of your wash load.

Produktspecifikationer

Varumärke:	Whirlpool
Kategori:	tvättmaskin
Modell:	AWOC 8283

Behöver du hjälp?

Om du behöver hjälp med Whirlpool AWOC 8283 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

tvättmaskin Whirlpool Manualer

Whirlpool awo d5726 Bruksanvisning

1 April 2025

Whirlpool AWOC 8283 Bruksanvisning

31 Mars 2025

Whirlpool awo d8244 Bruksanvisning

30 Mars 2025

Whirlpool AWO-D 6024 Bruksanvisning

30 Mars 2025

Whirlpool awoe 9540 Bruksanvisning

30 Mars 2025

Whirlpool awt 6124 1 Bruksanvisning

30 Mars 2025

Whirlpool Boston 1400 Bruksanvisning

27 Mars 2025

Whirlpool FFWDD 107448 BSV EE Bruksanvisning

25 Mars 2025

Whirlpool WPM 911W ADS SPT Bruksanvisning

25 Mars 2025

Whirlpool AWO-D7114 Bruksanvisning

6 Mars 2025

tvättmaskin Manualer

Nyaste tvättmaskin Manualer

Privileg Dynamic 78616 Bruksanvisning

1 April 2025

Hoover DXOA 58AC3-S Bruksanvisning

1 April 2025

Eudora EU 1101 Bruksanvisning

1 April 2025

Hotpoint-Ariston aq9f 29 u fr Bruksanvisning

1 April 2025

Novamatic WT1207 Bruksanvisning

1 April 2025

Hotpoint-Ariston artxd 149 Bruksanvisning

1 April 2025

Smeg SAW7514 Bruksanvisning

1 April 2025

Fagor 5FS-106714 Bruksanvisning

1 April 2025

Zanussi-electrolux fd 1226 Bruksanvisning

31 Mars 2025

TCL FP0914WD0 Bruksanvisning

31 Mars 2025