Whirlpool WZC3115DW Bruksanvisning

Whirlpool Frysar WZC3115DW

Läs nedan 📖 manual på svenska för Whirlpool WZC3115DW (24 sidor) i kategorin Frysar. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
User Guide
Chest Freezer
THANK YOU for purchasing this high-quality product. Register your freezer at www.whirlpool.com. In Canada, register your
freezer at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These numbers can be found inside your
freezer.
Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W11320196A
WARNING:
IMPORTANT SAFETY INSTRUCTIONS
PLEASE KEEP THESE INSTRUCTIONS
Plug into a grounded 3-prong outlet.
Do not remove the ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all parts and panels before operating.
Remove doors from your old appliance.
Use non-flammable cleaner.
Keep flammable materials and vapors, such as gasoline, well
away from the appliance.
Use two or more people to move and install the appliance.
Connect to a potable water supply only.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
person in order to avoid a hazard.
Do not store explosive substances such as aerosol can
with a flammable propellant in this appliance.
This appliance is intended to be used in household and
similar applications such as
- Staff kitchen areas in shops, offices and other working
environments;
- Farm houses and by clients in hotels, motels and other
residential type environments;
- Bed and breakfast type environments;
- Catering and similar non-retail applications.
To reduce the risk of fire, electric shock or injury to persons when using the appliance,
follow basic precautions, including the following:
2
PROPER DISPOSAL OF YOUR OLD
FREEZER OR REFRIGERATOR
WARNING
Suffocation Hazard
Remove doors or lid from your old freezer or
refrigerator.
Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned freezers or refrigerators are still
dangerous even if they will sit for “just a few days.”
BEFORE YOU THROW AWAY YOUR OLD FREEZER OR
REFRIGERATOR REMOVE THE DOORS OR LID.
Important information to know about disposal of
refrigerants:
Dispose of freezer in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
INSTALLING YOUR FREEZER
Unpacking
Remove Packaging Materials
JRemove tape and glue residue from surfaces before turning on the
freezer. Rub a small amount of liquid dish soap over the adhesive
with your fingers. Wipe with warm water and dry.
JDo not use sharp instruments, rubbing alcohol, flammable fluids,
or abrasive cleaners to remove tape or glue. These products can
damage the surface of your freezer. For more information, see the
front cover for safety instructions.
Clean Before Using
After you remove all of the packaging materials, clean the inside of
your freezer before using it. See the cleaning instructions in “Caring for
Your Freezer.”
Location Requirements
Ventilation and Clearance
JKeep flammable materials and vapors, such as gasoline, away
from freezer.
JDo not cover the freezer with items such as blankets, sheets,
tablecloths, etc. This reduces air circulation.
JAllow at least a 3" (7.5 cm) clearance on both sides of the freezer
and 2" (5 cm) between the back of the freezer and the wall. Leave
room above the freezer to open the lid.
Temperature
Your freezer operates most efficiently when located in an area where
the temperature is normally between 32°F (0°C) and 110°F (43°C).
Place your freezer in a location where the temperature will fall between
the low and high recommended temperature.
WARNING
Excessive Weight Hazard
Use two or more people to move and install freezer.
Failure to do so can result in back or other injury.
When Moving Your Freezer:
Your freezer is heavy. When moving the freezer for cleaning
or service, be sure to cover the oor with cardboard or
hardboard to avoid oor damage. Always pull the freezer
straight out when moving it. Do not wiggle or “walk” the
freezer when trying to move it, as oor damage could occur.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from freezer.
Failure to do so can result in death, explosion, or fire.
2" (5 cm)
3" (7.5 cm)
3
ICE AND WATER
Upon Moving to Final Location
JLevel the freezer from side to side and front to back so that the lid
will seal properly. Use shims to level the freezer if necessary.
NOTE: It should not be necessary to remove the lid during
installation. If, for any reason, the hinges need adjustment, contact
a designated service company.
Electrical Requirements
Before you move your freezer into its final location, it is important to
make sure you have the proper electrical connection.
Recommended grounding method
A 115 V, 60 Hz, AC only, 15 or 20 A fused, grounded electrical supply
is required. It is recommended that a separate circuit serving only
your freezer be provided. Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the temperature control to 0 (align circle
on knob with desired number), as shown, to turn off cooling, and then
disconnect the freezer from the electrical source.
Defrost Drain Cover
1. Remove defrost drain cover from the literature package.
2. Push drain cover into drain hole as illustrated.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
OPERATING YOUR FREEZER
Using the Control
Turn the freezer temperature control to 4 (align circle on knob with
desired number), as shown below. This setting is designed to maintain
the temperature at or near 0°F (-17.8°C) under normal operating
conditions.
Allow the freezer to cool 6 to 8 hours before filling with frozen food.
NOTE:
JWhen the freezer is first started, the compressor will run constantly
until the cabinet is cooled. It may take 6 to 8 hours (or longer),
depending on room temperature and the number of times the
freezer lid is opened.
JAfter the cabinet is cooled, the compressor will turn on and off as
needed to keep the freezer at the proper temperature.
JThe outside of your freezer may feel warm. This is normal. The
freezers design and main function is to remove heat from the
contents and air inside the freezer. The heat is transferred to the
room air, making the outside of the freezer feel warm.
Adjusting the Control
JTurn control to a higher number for colder temperatures. “7” is the
coldest setting.
JTurn control to a lower number for less cold temperatures. “0” is
off or defrost mode.

Produktspecifikationer

Varumärke: Whirlpool
Kategori: Frysar
Modell: WZC3115DW

Behöver du hjälp?

Om du behöver hjälp med Whirlpool WZC3115DW ställ en fråga nedan och andra användare kommer att svara dig




Frysar Whirlpool Manualer

Frysar Manualer

Nyaste Frysar Manualer