Whynter BH-2200 Bruksanvisning

Whynter Vågen BH-2200

Läs nedan 📖 manual på svenska för Whynter BH-2200 (7 sidor) i kategorin Vågen. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
Whynter Digital Body Fat and Water Scale
MODEL: BH-2100/ BH-2200
Please read this instruction booklet completely before operating.
1. SCALE CONSTRUCTION
2. TECHNICAL SPECIFICATION
Max weight: 150kg / 330lb / 24st
Min effective: 2kg / 4.4lb
Weight division: 0.1kg / 0.2lb
Weight unit: kg-lb-st
Body fat division: 0.1%
Age range for body fat: 10-80 years old
Height range: 100-220cm / 3ft 3.5in-7ft 2.5in
Fat range: 0-80%
Water range: 20-80%
Height unit: cm / ft-in
Memory: 10 person
Power: 2x3 V CR2032 Li-battery
3. WORKING PRINCIPLE
What is body fat percentage?
Body fat percentage is derived from the ratio between the body weight and body fat.
Due to difference in race and region, the charts above are for reference only.
Original Measure Method:
Body fat percentage used to be measured in several ways:
CALIPER: Using hand-held caliper that exert a standard pressure, the skinfold thickness
is measured at various body location.
DEXA: Use a whole body scanner that has x-rays to pass a person’s reclining body to
collect the data.
UNDERWATER WEIGHING: This method measures whole body density by determining
body volume. There is a variety of equipments available to do underwater weighing. It first
requires weighing of a person out of the water and then immersing the person totally in
water and weight again. The densities of bone and muscles are higher than water, and fat
is less dense than water so a person with more bone and muscle will weigh more in water
than a person with more fat.
Our Method:
BIA We design our method of body fat percentage measuring as BIA (electronic
impedance analysis). Body impedance is measured when a small and safe electric signal
passes through the body. Body impedance is greatest in fat issue, which fat-free body
mass allows the signal to pass through much more easily. Using the impedance
measurements along with a person’s height, weight, age and gender, the percentage of
body fat and water is calculated.
Factor affected body fat percentage
Body fat percentage is affected by body hydration. To ensure the accuracy of body fat
percentage, have your body fat percentage measured at night. And there will be little
difference on the reading of the body fat percentage than weighing yourself at different
times of the day. Measuring under consistent environments will yield the best results.
Body fat percentage is also affected by following factor, diet style, drinking too much
alcohol, heavy exercise, certain prescription drugs or diuretics, illness or woman’s
menstrual cycle.
4. MANUAL
Button Definition
Press once to start the scale
During setting, press to change the parameter or to confirm the data input
During setting, press to change the parameter
Preparation before weighing:
1) Power Supply:
When the LCD indicates “Lo”, replace battery.
2) Units option: The scale is equipped with LB / KG /ST unit systems. Please choose unit
system on the back of scale as shown in the picture below.
3) Scale position: Always place the scale on hard and flat surface to ensure the accuracy.
Attention: Please do not put your foot on the edge of scale to avoid tipping.
To measure the weight, body fat and water percentage
Note:
1. Select a person number (P0-P9) and input your gender, height and age before
standing on the scale.
2. The personal data only needs to be entered once and the scale will store your data
under your person number.

Produktspecifikationer

Varumärke: Whynter
Kategori: Vågen
Modell: BH-2200

Behöver du hjälp?

Om du behöver hjälp med Whynter BH-2200 ställ en fråga nedan och andra användare kommer att svara dig




Vågen Whynter Manualer

Whynter

Whynter BH-2200 Bruksanvisning

13 September 2024

Vågen Manualer

Nyaste Vågen Manualer