Wilderness Equipment Mountain Expedition Bruksanvisning

Wilderness Equipment Att Mountain Expedition

Läs nedan 📖 manual på svenska för Wilderness Equipment Mountain Expedition (36 sidor) i kategorin Att. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/36
The Australian Pack Maker
BACKPACK INSTRUCTIONS
TELL US ABOUT YOUR PURCHASE!
Send us an email telling us which pack model you have purchased and where
you bought it and we will put you in our quarterly draw to win a WE canvas
daypack. We will also send you the guidelines and details of our o er to reward
you for good photos of WE gear taken on your expeditions.
Send your email now to: henry@seatosummit.com.au
CONTENTS
BACKPACK BASICS
FOUR ADJUSTMENT STEPS
INTERCHANGEABLE HARNESS SIZES
LOADING YOUR PACK
ADJUSTING THE FRAME PROFILE
CHECKING BACK LENGTH
GETTING THE MOST FROM YOUR WE PACK
HEAVY LOADS
DAY PACK NOTES
OFF-TRACK
CLIMBING
WET WEATHER
BAGGAGE CONVEYORS & LUGGAGE COMPARTMENTS
ACCESSORIES
TAKING CARE OF YOUR PACK
FABRICS
ZIPS & ZIP SLIDERS
BUCKLES
STORAGE
FIELD & DIY REPAIRS
WE PACK BACK SYSTEMS
LOOK UP YOUR PACK MODEL AND READ THE NOTES ON ITS BACK SYSTEM
WARRANTY
CONTACT US
BACKPACK BASICS
Whatever the load you are carrying, comfort and energy conservation depend
on how you load your pack bag – what you put where - and then, each time
you put on your pack, making simple harness adjustments in the correct
sequence. Out there, we see far too many people with badly loaded and poorly
adjusted packs. Everything we do in pack design is directed towards your
backpacking enjoyment. You can  nish o the job by taking care to follow
these basic instructions.
Most of the weight in a heavy pack is best carried at hip level, on the pelvic
structure and the associated posterior muscles. To achieve this, packs over
about 50 litres capacity invariably have a sti internal frame and a full hip
harness, the two features that distinguish a ‘backpack from a ‘day pack’. You
should think of the frame as propping the pack bag up o the hip harness,
concentrating the weight at hip level. If the pack bag can sag load will fall back
onto your shoulders. With loads above 15 kilograms the hip harness design also
becomes more and more important but,  nally, it also all depends on the tting
and adjustment of your pack.
Successful adjustment is only possible if the back length of the pack you have
purchased matches your torso length. This is the distance from your hip bones
up to your shoulder level. It is normally your retailer’s job to ensure your new
pack is the right back length but, as a quick check, put on your pack and fasten
the hip harness at the correct level, explained below. Looking from the side the
general ‘factory-set’ curves of the pack’s ‘body or ‘harness’ panel should line up
well with those of your back pro le. Often there is no need to change the frame
curvature. A big gap in the middle of your back probably indicates the pack is
too short for you. For more detail go to Checking Your Pack’s Back Length at the
end of this Backpack Basics section. Also, if you have a WE pack with our unique
dual-back-length system make sure this is set for your torso length, another job
for your retailer when  tting your pack.
Now, before attempting any adjustments, you must load your pack so it
simulates a real trip load, settling the pack down on your body. Place about
10kg in the pack bag but don’t just chuck everything in so it hangs like a sack
of potatoes. Read the Loading Your Pack section several pages on. Make use of
the pack compression straps to hold the load in place close to your body.

Produktspecifikationer

Varumärke: Wilderness Equipment
Kategori: Att
Modell: Mountain Expedition

Behöver du hjälp?

Om du behöver hjälp med Wilderness Equipment Mountain Expedition ställ en fråga nedan och andra användare kommer att svara dig