Worx Nitro WX542.9 Bruksanvisning

Worx Sågmaskin Nitro WX542.9

Läs nedan 📖 manual på svenska för Worx Nitro WX542.9 (16 sidor) i kategorin Sågmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
3
TABLE OF CONTENTS
1. PRODUCT SAFTY
2. COMPONENT LIST
3. TECHNICAL DATA
4. OPERATING INSTRUCTIONS
5. WORKING HINTS FOR YOUR JIGSAW
6. MAINTENANCE
7. TROUBLESHOOTING
8. ENVIRONMENTAL PROTECTION
9. DECLARATION OF CONFORMITY
1. PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying
power tools with your finger on the switch or
energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles.
A careless
action can cause severe injury within a fraction of
a second.
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The correct
power tool will do the job better and safer at the

Produktspecifikationer

Varumärke: Worx
Kategori: Sågmaskin
Modell: Nitro WX542.9

Behöver du hjälp?

Om du behöver hjälp med Worx Nitro WX542.9 ställ en fråga nedan och andra användare kommer att svara dig


Sågmaskin Worx Manualer

Worx

Worx WA4301 Bruksanvisning

26 September 2024
Worx

Worx WA0307 Bruksanvisning

22 September 2024
Worx

Worx WX437 Bruksanvisning

22 September 2024
Worx

Worx Nitro WX542.9 Bruksanvisning

22 September 2024
Worx

Worx WX529L.9 Bruksanvisning

20 September 2024
Worx

Worx WG349.9 Bruksanvisning

17 September 2024
Worx

Worx WX523L.9 Bruksanvisning

15 September 2024
Worx

Worx WX473 Bruksanvisning

14 September 2024
Worx

Worx WG324E Bruksanvisning

8 September 2024
Worx

Worx WX801L.1 Bruksanvisning

6 September 2024

Sågmaskin Manualer

Nyaste Sågmaskin Manualer

Craftsman

Craftsman CMCPS630 Bruksanvisning

10 Januari 2025
Husqvarna

Husqvarna 455e Rancher Bruksanvisning

8 Januari 2025
Gude

Gude GSS 400 Bruksanvisning

8 Januari 2025
Cocraft

Cocraft PRO RT18-PL Bruksanvisning

8 Januari 2025
Makita

Makita DUC306PG2 Bruksanvisning

8 Januari 2025
Echo

Echo CS-400 Bruksanvisning

8 Januari 2025
Echo

Echo CS-370 Bruksanvisning

8 Januari 2025
Fuxtec

Fuxtec FX-E1HAS20 Bruksanvisning

8 Januari 2025
Einhell

Einhell BT-MB 550 U Bruksanvisning

7 Januari 2025
Sun Joe

Sun Joe 24V-CSSHRP-CT Bruksanvisning

7 Januari 2025