Xantech J-BOX BLAST-IR Bruksanvisning
Läs nedan 📖 manual på svenska för Xantech J-BOX BLAST-IR (4 sidor) i kategorin Flash. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
- 1 -
INSTALLATION INSTRUCTIONS
380-20
Single Gang, J-BOX, BLAST-IR™ Emitter
DESCRIPTION
The 380-20 J-BOX BLAST-IR™ contains three high-intensity Infrared LEDs housed in a metal
enclosure that can easily be mounted inside a standard, single gang, J-BOX electrical receptacle.
The benefit of the 380-20 is that it can “flood” an enclosed area with an infrared signal. The 380-20
comes with mounting screws and a Decora® style insert that can be used with the popular Decora®
faceplate.
SPECIFICATIONS
+12VDC, 200mA.
Red IR talk-back LED (internal).
Dimensions: 1-3/4” W x 4” H x 1-1/4” D.
Recommended wire requirements: 3 or 4 conductor, 22 gauge solid or stranded wire up to
600 feet (unshielded OK).
Able to achieve a distance well over 30 feet.
Breakawa
y
plaster-ears
Red IR talk-back LED
6-32 Threaded hole
(
2
)
for
Decora® -style cover plate
J-Box mountin
g
hole
(
2
)
4-Pin matin
g
plu
g
(included)
Hi
g
h-intensit
y
infrared LED
Decora
®
St
y
le
Insert with dark
tinted lens cover
(included)
Decora
®
st
y
le
faceplate
(not included)
- 2 -
INSTALLATION
The 380-20 is intended to be wired to the terminals of any Xantech connecting block such as the
CB12 and 789-44. Use 3 or 4 conductor cable, as specific above, to run between the connecting
block and the 380-20. The conductor cable will be used to connect the +12VDC, IR BUS, and
GROUND terminals.
While it is possible to make wired connections without a Xantech connecting block, it is not
recommended. The Xantech connecting block reduces installation time, helps to eliminate errors,
allows easy troubleshooting, and permits easy system upgrades later, if needed.
Connecting the power supply to the connecting block must be the last step. Be sure to verify all wires
are connected to the correct terminals. Incorrect connections may destroy the product. Two 380-20’s
may be connected in parallel.
Figure 1: 380-20 Basic IR Repeater System. 380-20 IR Repeater System.Figure 2:
NOTE: The 380-20 infrared intensity is so great that it is possible to place the unit in an indirect view
of the components to be controlled. This is due to the infrared waves “bouncing” off a wall and/or
object. An ideal location would be an enclosed closet where the system components are stored. It is
strongly recommended to experiment with the 380-20’s exact location before installing the single
gang box, J-Box, receptacle.
The three high-intensity infrared LEDs (light-blue) located on the front of the product are not visible to
the human eye. The red talk-back LED indicates the 380-20 is receiving an IR signal at the input.
- 3 -
Adding IR Attenuators
In the event that the infrared (IR) signal is judged to be too intense, apply the included IR attenuators
(white discs). The IR attenuators are to be placed between the 380-20 LED and the lens on the
Decora® style insert.
Simply place the white disc between the light blue LED emitter and the lens.
Power Supply
It is recommended to use a +12Vdc, 200mA power supply.
Xantech’s 782-00 or 781RG power supply is acceptable for use with this product.
IR Compatibility
Due to various IR command structures, the 380-20 may not be compatible with certain brand name
components. It is highly recommended to test the 380-20 and all devices that it will control before final
installation.
Produktspecifikationer
| Varumärke: | Xantech |
| Kategori: | Flash |
| Modell: | J-BOX BLAST-IR |
Behöver du hjälp?
Om du behöver hjälp med Xantech J-BOX BLAST-IR ställ en fråga nedan och andra användare kommer att svara dig
Flash Xantech Manualer
18 September 2024
17 September 2024
Flash Manualer
- Flash Sony
- Flash Braun
- Flash Nikon
- Flash Olympus
- Flash Canon
- Flash Leica
- Flash Fujifilm
- Flash Konica Minolta
- Flash Metz
- Flash Vello
- Flash Rollei
- Flash Sigma
- Flash Godox
- Flash Goodram
- Flash Yongnuo
- Flash Nissin
- Flash Pentax
- Flash Ikan
- Flash Minox
- Flash GVM
- Flash Genaray
- Flash Vivitar
- Flash Profoto
- Flash SeaLife
- Flash Quantum
- Flash Impact
- Flash Manfrotto
- Flash Aputure
- Flash Bolt
- Flash Kenko
- Flash Elinchrom
- Flash Neewer
- Flash Rotolight
- Flash SWIT
- Flash COLBOR
- Flash Cactus
- Flash PolarPro
- Flash ANDYCINE
- Flash Westcott
- Flash Ikelite
- Flash Kaiser Fototechnik
- Flash Triopo
- Flash Lastolite
- Flash FoxFury
- Flash Jinbei
- Flash Quadralite
Nyaste Flash Manualer
22 Oktober 2024
22 Oktober 2024
8 Oktober 2024
6 Oktober 2024
5 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
29 September 2024
29 September 2024