Xiaomi Yeelight Sunflower Bruksanvisning

Xiaomi Lättnad Yeelight Sunflower

Läs nedan 📖 manual på svenska för Xiaomi Yeelight Sunflower (3 sidor) i kategorin Lättnad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/3
Yeelight Sunower
User manual (English)
1/ 3
Copyright © yeelight.com 2012-2014
Ver: -1 SF
Yeelight sunower is a wireless, smart, scene lighng system. It can be installed into your home -Fi network, Wi
and all the bulbs form system with control box automaticallya . You may control the bulb to change their color
and brightness with smart device such smart phone or pad, also you may save the seng to a scene and recall as
it at next me Now the app supports iOS version 5.0+ and Android 2.3.3+. .
1. Starter pack
For the starter pack, there are 3 yeelight bulbs and 1 control box; it the base lighting system. is
1) T bulb he
The yeelight sunower bulb is a LED lighting bulb, in which there is a wireless sending/receiving component
working via Zigbee signal The bulb receives signals from s. control box changes color and brightness to what and
you want.
2) Control box
The control box is a LAN (local area network) to Zigbee bridge, which transforms the smart phone control
commands (Wi-Fi signals) to Zigbee signals. The Control box has one LAN socket, with which it can be connected
to your home Wi-Fi AP. When it boots up, an IP address will be assigned and your smart phone can search and
connect to it via Wi-Fi. The following gure shows the interfaces on control box.
2. Single pack
For the single , there is only one yeelight bulb in the package The single pack cannot be used independently, pack .
and it should be used to extend bulb number for a starter pack. Please refer to Extra bulb via single pack in
Installaon secon on how to extend.
LED inside
Wireless antennae area
Cap
Light diusing dome
Wireless indicator
LAN indicator
LAN interface
Button
Introducon
Yeelight Sunower
User manual (English)
2/ 3
Copyright © yeelight.com 2012-2014
Ver: -1 SF
Aer you install all the components system is running, a wireless binding between the bulb and control box and
is created. In this manual, there are also operaons for you to unbind them.
1. Preparaon
1) There is a home Wi-Fi AP and your smart phone can connect to it;
2) Check the accessories, including LAN cable, an USB power cable and an USB power adapter.
2. Starter pack
1) Plug LAN cable into LAN interface of your Wi-Fi AP, and plug another end into control box;
2) Plug in the power cable.
The LAN indicator on control box will fast ash for several mes during network conguraon, then slow ash for
several mes during boong. When it boots up, the LAN indicator always on. During your control from smart is
phone, it will ash 3 mes when it gets a command.
3) Screw the bulb into mount base, then turn on the power.
When bulb is turned on, and it transmits messages with control box, the wireless indicator on control box will
show on.
3. Extra bulb via single pack
Screw the bulb into mount base, then turn on the power. Refresh the list on smart phone, it will show new
discovered bulbs.
If you have problems when install extra bulbs, especially when you get them from other control, try to restore
bulb to factory setng, or put them closer to control box to get better wireless signal. About restoring to factory
seing, see the operaon in advanced operation secon.
4. Advanced operaon
1) Restore control box to factory setng
Press down the buon on control box and hold it for 10 seconds, then release , both the LAN indicator and it
wireless indicator will fast ash for about 3 seconds. When all the 2 indicator LEDs shows on, the operaon is done.
The restore operaon will clean the bind info on control box, so the bulb list will be swept, you should reinstall
them. If the bulb is online when you do this operaon, it also be restored to factory seng.
2) Restore bulb to factory seng
Keep your bulb on for at least 30s, then turn it off, now you can do the restore operaon as following steps:
i) Turn bulb on, when it’s up and shows maximum white light, turn o immediately (less than 5 seconds);
ii) Repeat above step for 3 mes;
iii) Then turn on the bulb again, you could see bulb shows red/green/blue/white, it means the
Installaon
Yeelight Sunower
User manual (English)
3/ 3
Copyright © yeelight.com 2012-2014
Ver: -1 SF
operaon is successful.
5. Download APP
1) For iOS user, go to App Store and search yeelight. Please be aware that there are other yeelight app, such as
blue, you should use the one for sunower.
2) For Android user, please go to Google play and search yeelight, and the app icon is the same as iOS.
3) Yeelight.com website also provides the link for download.
1) Is the bulb bound with control box aer installaon?
Yes, the will be created aer installaon. If you want to move a bulb to another control box, you should binding
restore it to factory seng at the very beginning.
2) How to unbind bulb and control box?
See the operaon in Installation secon.
3) How to restore to factory seng?
See the operaon in Installation secon.
4) My Wi-Fi AP does not support SSDP scan, what should I do?
You can get the IP address via the conguraon page of the Wi-Fi AP, then ll the address in yeelight APP. The smart
phone app will connect this xed IP and do not try to scan automacally.
5) Bulb is turned on, but it shows oine on smart phone.
If you are install them, please make sure it’s restored to factory setng rst;
If you encounter this issue when you use them aer successful installaon, please check the distance between
bulb and control box, or check if there is wireless interference devices. This may aect the wireless signal and cause
data transmission error.
6) The bulb cannot be discovered when I install them.
Try to restore it to factory setng, see the operaon in Installaon secon, or put them closer to control box to get
beer wireless signal.
Quesons and Answers

Produktspecifikationer

Varumärke: Xiaomi
Kategori: Lättnad
Modell: Yeelight Sunflower

Behöver du hjälp?

Om du behöver hjälp med Xiaomi Yeelight Sunflower ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Xiaomi Manualer

Xiaomi

Xiaomi Yeelight Sunflower Bruksanvisning

17 September 2024
Xiaomi

Xiaomi Mi Motion-Activated Night Light Bruksanvisning

15 Juli 2024

Lättnad Manualer

Nyaste Lättnad Manualer

Nedis

Nedis WIFILS52CRGBW Bruksanvisning

16 Januari 2025
Nedis

Nedis BTTNTP-44W120 Bruksanvisning

15 Januari 2025
Philips

Philips HF3304 Bruksanvisning

14 Januari 2025
Nedis

Nedis BTTNTP-22W60 Bruksanvisning

14 Januari 2025
Busch + Müller

Busch + Müller Kite Bruksanvisning

11 Januari 2025
Kogan

Kogan KASMCLLT30B Bruksanvisning

9 Januari 2025
OttLite

OttLite VW2009 Bruksanvisning

9 Januari 2025
Neewer

Neewer VL67C Bruksanvisning

9 Januari 2025
Neewer

Neewer PL60B Bruksanvisning

9 Januari 2025
Neewer

Neewer AP100B Bruksanvisning

9 Januari 2025