Xvive P3 Bruksanvisning

Xvive högtalare P3

Läs nedan 📖 manual på svenska för Xvive P3 (1 sidor) i kategorin högtalare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

SHENZHEN FZONE TECHNOLOGY CO., LTD.

2nd oor, Building 12, Xicheng Industrial Area, Xixiang Town,

Baoan District, Shenzhen Guangdong China. 518101

www.xvive.com

Made In China

料号：111081370 P3说明书 EN

尺寸217*210mm 材质：80g书纸正反双面印刷

SAFETY INSTRUCTIONS FOR LITHIUM-ION

RECHARGEABLE BATTERIES

FCC CERTIFICATION

CAUTION:

RISK OF ELECTRIC SHOCK—DO NOT OPEN

If abused or misused, the rechargeable batteries may leak. In

extreme cases, they may even present a risk of explosion, re,

heat, smoke or gas. Xvive does not accept any liability for damage

arising from abuse or misuse.

• Keep away from children.

• Only charge rechargeable batteries with chargers

recommended by Xvive.

• Observe correct polarity.

• Pack/store charged rechargeable batteries so that the terminals

cannot contact each other (danger of shorting out/re hazard).

• Do not expose to moisture.

• Switch rechargeable battery-powered products o after use.

• Only charge rechargeable batteries at ambient temperatures

between 10°C/50°F and 40°C/104°F.

• When not using rechargeable batteries for extended periods

of time, charge them regularly (about every three months).

• Do not mutilate or dismantle.

• Do not heat above 60°C/140°F, e.g. do not expose to sunlight

or throw into a re.

• Immediately remove rechargeable batteries from obviously

defective products.

• Do not continue to use defective rechargeable batteries.

• Only use rechargeable batteries specied by Xvive.

• Dispose of rechargeable batteries at special collection points

or return them to your specialist dealer.

• Store the products in a cool and dry place at room

temperature (approx. 20°C/68°F).

• Remove the rechargeable batteries if the products will not

be used for extended periods of time.

1. Observe all instructions in the manual carefully.

2. Do not to perform service operations beyond those

described in the manual. Service is required when

the apparatus has been damaged in any way, such as:

• Liquid has been spilled or objects have fallen into the

apparatus

• The unit has been exposed to rain or moisture

• The unit does not operate normally or changes in

performance in a signicant way

• The unit is dropped or the enclosure is damaged

3. Do not place near heat sources, such as radiators, heat

registers, or appliances which produce heat.

4. Guard against objects or liquids entering the device.

Do not use or place unit near water.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specied by the

manufacturer.

WARNING:

BEFORE USING YOUR PRODUCT,

CAREFULLY READ THE OPERATING INSTRUCTIONS:

IMPORTANT SAFETY INSTRUCTIONS:

PLEASE READ THESE INSTRUCTIONS

AND KEEP IN A SAFE PLACE

INFORMATION ABOUT COLLECTION

AND DISPOSAL OF OLD ITEMS

AND USED BATTERIES

PAIRING WITH P3

LED ACTIVITY

STEREOLINKING TWO P3 UNITS

OVERVIEW

SPECIFICATIONS

LEGAL DISCLAIMER

P3 TROUBLESHOOTING

LIMITED WARRANTY

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

WARNING:

Changes or modications not expressly approved in writing

by XVIVE may void the user’s authority to operate this equipment.

RF EXPOSURE STATEMENT:

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

NOTE:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. There

is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Hereby, SHENZHEN FZONE TECHNOLOGY CO., LTD,

declares that this type of equipment is in compliance with

the essential requirements and other relevant provisions of

Directive 2014/53/EU

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.

This Class B digital apparatus complies with Canadian ICES-003.

IC Caution: RSS-Gen Issue 4 December 2014"&"CNR-Gen 4e

Décembre 2014:

This device complies with Industry Canada licence-exempt

RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2)

This device must accept any interference, including interference

that may cause undesired operation of the device.

Le present appareil est conformé aux CNR d'IndustrieCanada

applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible

d'en compromettre le fonctionnement.

To protect our environment, please take old products and

used batteries to proper collection places; and, in the EU,

follow your national legislation and the Directives 2012/19/EU

and 2006/66/EC.

When disposing of old products and batteries, please help to

save valuable resources and prevent any possibilities of side

eects on human health and the environment.

You can contact your local authority to nd out how to

dispose of old products and used batteries responsibly.

For product owners in the European Union:

If you want to discard electrical and electronic items, please

contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the

European Union:

Please contact your local authorities or dealer for more

information regarding the disposal of old items and used

batteries.

The symbols shown below are valid only in the European

Union. They indicate that you must not mix used electronic

products and batteries with general household garbage.

• XLR-output Bluetooth audio receiver for mixers and active

PA speakers

• Connects smartphones & laptop to audio broadcast systems

via Bluetooth to amplify music or other audio

• The P3 set includes one P3 Bluetooth audio receiver for

mono audio

• The P3D set includes two P3 Bluetooth audio receivers for

dual mono or stereo audio. Two P3 units can be linked in

order to receive a stereo signal

• Internal rechargeable battery provides 6 hours of operation

• USB Type-C port for charging via any 5V USB power source

• Stable connectivity over a 100 ft range (line-of-sight without

obstacles). Gives you ample coverage for parties, events and

weddings

The Charging LED illuminates whenever P3 is connected to

USB power. It’s solid red when the unit is charging, and turns

to solid green when the unit is fully charged.

The Power and Battery Status LED illuminates whenever P3 is

powered on. When battery strength is above 31%, the LED will

be solid red. When battery strength is less than 30%, it will

ash every three seconds. When the battery strength is less

than 5%, it will ash every 0.5 seconds, indicating that the unit

needs to be recharged.

1. Follow steps 1-5 in “PAIRING WITH P3”.

2. Press and hold the Stereo-Link button for 3 seconds on the

primary (left channel) P3. Press and hold the Stereo-Link

button for 3 seconds on the secondary (right channel) P3.

3. Both Stereo-Link LEDs will ash while the P3 units search for

each other.

4. When they are successfully linked, each P3 will produce a

conrmation tone and the Stereo-Link LEDs on both units

will be on.

NOTE: Before pairing, ensure that there are no wi devices

(such as wireless routers) in the area.

NOTE: If the connection is not successful, please wait for the

connection, or reset the P3 power and smartphone Bluetooth

function before trying to connect again.

NOTE: When wirelessly connected to a single loudspeaker,

the left and right audio signals will be summed to mono.

NOTE: When a battery is not available, the P3 can be powered

by a regular 5V USB adapter.

XVIVE accepts no liability for any loss which may be suered

by any person who relies either wholly or in part upon any

description, photograph, or statement contained herein.

Technical specications, appearances and other information

are subject to change without notice.

For the applicable warranty terms and conditions and additional

information regarding the XVIVE Limited Warranty, please

email support@xvive.com

1. Power on your P3 device.

2. The system will automatically search for Bluetooth sources

when powered on; but you can press and hold the Pair

button for 3 seconds to activate—the Bluetooth LED will

ash when P3 is in pairing mode.

3. On your smartphone or tablet, turn on Bluetooth, nd "P3"

in the devices list, and connect to it.

4. When paired successfully, a conrmation tone will sound

and the blue Bluetooth LED will illuminate.

5. Adjust the volume as desired on your smartphone/tablet

and mixer.

XLR output

Type-C USB

charging port

Charging LED

Stereo-link LED

Stereo-link

pairing button ST EREOLINK

PAIR

Power on/o

Power and

Battery Status LED

For Mixers and Active PA/DJ Systems

Live sound mixer

Smartphone

Laptop

Portable integrated PA system

Digital audio recorder

Active loudspeaker

STEREOLINK

Bluetooth LED

Bluetooth

pairing button

STERE OLINK

PAIR

S T EREOLINK

PAIR

S T EREOLINK

PAIR

Dimensions: 24 x 24 x 116.5 mm

Weight: 0.12 lbs / 52g

XLR output: XLR male, balanced

Output level: +4 dBu

Bluetooth proles: 5.1, A2DP, AVRCP

Supported Bluetooth codecs: SBC, AAC

Bluetooth range: Up to 100 feet (30.5 m)

Frequency band: 2402 to 2480 MHz

Battery life: Up to 6 hours

Recharging time: Up to 2 hours

USB charging: Type-C 5V, 500 mA

A2DP frequency response: 20 Hz - 20 kHz (ref 1 kHz, ± 3 dB)

DAC resolution: 16-bit, 48 kHz

Rechargeable battery: Built-in lithium-ion 300 mAh

BLUETOOTH LED/STEREO LINK LED IS FLASHING

• P3 is searching for a Bluetooth device; pair with a smartphone

or computer following the “PAIRING WITH P3” instructions.

• The device could be outside the working range of the Bluetooth

connection. Bring the P3 and smartphone/laptop closer

together; when within range, connection should happen

automatically.

BLUETOOTH LED/STEREO LINK LED IS OFF

• Pairing is unsuccessful. Check the directions in “PAIRING WITH

P3” and make sure the devices are not too far apart.

The connected devices must remain within working range

during use in order for the connection to remain stable.

SMARTPHONE/COMPUTER ALWAYS SEARCHING,

CANNOT PAIR

• Wait for the Bluetooth connection to be made

• Turn o the power and turn it on again

VOLUME TOO LOW / NO SOUND

• Turn up the volume on your smartphone/pad/computer

• Turn up the volume on the mixer or connected device

WARNING TONE

• A tone will sound when Bluetooth is successfully connected

or disconnected

• When Bluetooth is searching there is no warning tone

CANNOT CHARGE / NOT WORKING

• Check charger connections to the P3 and power source

• Contact Xvive for warranty support

L+R

Stereo-Link Two P3s

One P3 for Mono audio

P3 P3D

Produktspecifikationer

Varumärke:	Xvive
Kategori:	högtalare
Modell:	P3
Vikt:	700 g
Bredd:	133 mm
Djup:	127 mm
Höjd:	35 mm
Certifiering:	FCC, CE, RoHS, WEEE
Förvaringstemperatur:	-20 - 80 °C
Förvaringsfuktighet:	10 - 90 procent
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent