Airlive WLA-5000AP Bruksanvisning

Airlive Åtkomstpunkt WLA-5000AP

Läs nedan 📖 manual på svenska för Airlive WLA-5000AP (22 sidor) i kategorin Åtkomstpunkt. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/22

Quick Setup Guide

WLA-5000AP

802.11a/b/g Multi-function

Wireless Access Point

English ●●●

Slovensky ●●●

Česky ●●●

English

EnglishEnglish

802.11 a/g Wireless AP

WLA

5000AP

Important Information



The AP+WDS mode’s default

IP address is 192.168.1.1



The Client mode’s default IP is

192.168.1.2



The default Subnet Mask is

255.255.255.0



 The default password is airlive

 The default SSID is airlive



The default DHCP client is

Disabled

 The default is set to AP+WDS

mode firmware



You need to change the firmware

to use the Client Mode. The client

mode firmware is in the supplied

CD ROM’s Firmware directory.



The WDS and Repeater mode

does not work in Turbo

mode. When using those Mode,

please do not select Super A or

Super G modes.

LED Indicators

LED Status

Indicator Meaning Solid Flashing

Power Turns solid green when power

is ON N/A.

LAN LAN Connection is detected. Receiving/

Sending data

Wireless Wireless Connection is made Receiving/

Sending data

Ports and Connectors

z Reset: Press 10 seconds to

restore settings to factory default

z LAN: Connect your PC, Switch,

or Router here.

z Power: Connect the included

Power adapter here.

z Antenna: Install Antenna Here

Antenna

Connector

English

Antenna

Connector

English

EnglishEnglish

802.11 a/g Wireless AP

WLA

5000AP

Installation Steps

1. Please install your network cards first before the AP

2. Screw-in the antenna (clockwise) into the Antenna connector

3. Connect the power and LAN cable to the back

4. Use your wireless card to do a site survey, the default SSID is airlive

5. If you need to change AP’s configuration, please follow the procedure

below:

 The AP mode’s default IP address is 192.168.1.1. Please make

sure your computer IP is in the same subnet as the AP (i.e.

192.168.1.x)

 Open the web browser and enter 192.168.1.1.

 Enter the Password airlive.

Changing Firmware

The default firmware is AP+WDS firmware, the AP mode and WDS mode

uses the same firmware.

If you need to use the Client mode feature, you have to change the firmware.

Please follow the instruction below:

1. Open your web browser, enter your AP’s IP address (AP mode

default is 192.168.1.1).

2. When you are asked about the password. Please enter airlive in

the password field.

3. When the following screen appears. Please click on the System

Tools.

English

Produktspecifikationer

Varumärke:	Airlive
Kategori:	Åtkomstpunkt
Modell:	WLA-5000AP
Färg på produkten:	Zwart, zilver
Vikt:	1700 g
Förpackningens vikt:	1700 g
Förpackningens bredd:	55 mm
Djuppackning:	545 mm
Förpackningshöjd:	145 mm
Monteringsmetod:	Muur
Ursprungsland:	China
Maximal viktkapacitet:	75 kg
Panelmonteringsgränssnitt:	200 x 200,300 x 200,300 x 300,400 x 200,400 x 300,400 x 400,600 x 400,600 x 600,800 x 400,800 x 600,900 x 600 mm
Kompatibilitet med monteringsgränssnitt (min):	200 x 200 mm
Kompatibilitet med monteringsgränssnitt (max):	900 x 600 mm
Antal skärmar som stöds:	1
(Ytter) huvudpaketets höjd:	130 mm
(Ytter) huvudförpackningens bredd:	310 mm
(Ytter) huvudförpackningens bruttovikt:	11000 g
(Ytre) huvudpaketets längd:	565 mm
Kvantitet per (yttre) huvudkartong:	6 stuk(s)
Maximal skärmstorlek:	110 "
GTIN (EAN/UPC) nummer (yttre) huvudförpackning:	8716184076442
Minsta skärmstorlek:	32 "
Avstånd till väggen (min):	9.5 mm