Aluratek AIS01F Bruksanvisning

Aluratek Bluetooth-mottagare AIS01F

Läs nedan 📖 manual på svenska för Aluratek AIS01F (1 sidor) i kategorin Bluetooth-mottagare. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

iStream DockFree Bluetooth Audio Receiver

aluratek.com

Quick Start Guide

AIS01F

Product Application

Operation

Note: The pairing mode will last 2 minutes. AIS01F will switch to the standby mode automatically if

no devices can be connected within 2 minutes.

Pairing with the transmitter such as iPhone, smart phone, and tablet:

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for

detail instruction. The general pairing procedures are as follows:

1. Make sure AIS01F is turned Off.

2. Activate AIS01F pairing mode by press and hold the power button for 6-7 seconds.

3. Activate your device’s Bluetooth function and set your device to search for Bluetooth

devices. Select AIS01F when it is found.

4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

5. If prompted by your device to connect, please select “Yes”.

6. After connecting successfully, the blue LED will flash twice every 5 seconds.

Note: Please make sure the audio output is set to Bluetooth / AIS01F for audio streaming from the device.

For more information, please visit: http://aluratek.com/warranty-return-policy

You can register your product online at: http://aluratek.com/product-registration

E-mail: support@aluratek.com

Web: www.aluratek.com/support

Local (Tustin, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect in material or workmanship for

1 Year from the date of purchase.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

Tech Support & Warranty Information

Operation

Charging the battery

The battery is not fully charged and it is highly recommended that you charge AIS01F

before you begin using it.

Note: Using AIS01F “out of the box” will not harm the device. You will experience reduced battery

life as the unit will not be fully charged.

Connect the USB end of the cable provided to your PC and the charger plug to the

charging jack of AIS01F. Please charge the battery for a minimum of (3) hours. The Red

LED will be on while charging. When charging is complete, the red LED will turn off.

Function Operation LED Indicator

Power On Press and hold Power button for

3-5 seconds

Blue LED - 1 second

Enter Pairing

Mode

Ensure AIS01F is turned Off. Press and

hold Power button for 6-7 seconds until

LED flashes red and blue alternately

LED flashes red and

blue alternately

Power Off Press and hold Power button for

3-5 seconds

Red LED - 1 second

Connect the iStream to

any speaker or dock with

a 3.5mm audio jack

Transmit music from your digital

device to the iStream up to 33’ Power button

Charge the iStream with

the included USB cable

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

AUX IN

Produktspecifikationer

Varumärke:	Aluratek
Kategori:	Bluetooth-mottagare
Modell:	AIS01F
Bredd:	305 mm
Djup:	267 mm
Blåtand:	Ja
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6E (802.11ax)
Ethernet LAN:	Ja
Antal USB 2.0-portar:	2
Antal HDMI-portar:	1
Mikrofon, linjeingång:	Ja
Antal Ethernet LAN (RJ-45)-portar:	2
Hörlursutgångar:	1
WiFi-standard:	Wi-Fi 6E (802.11ax)
Stöder Windows:	Windows 10 x64, Windows 11 x64
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	6
Processoruttag:	LGA 1700
Processorfabrikant:	Intel
Maximalt internminne:	128 GB
Ljudutgångskanaler:	5.1 kanalen
Ethernet-gränssnittstyp:	2.5 Gigabit Ethernet
Chipset moderkort:	Intel Z790
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ A:	2
Typ av minnesplats:	DIMM
Ljudchip:	Realtek ALC4082
S/PDIF-utgång:	Ja
RAID-stöd:	Ja
Minneskanal:	Dubbelkanaals
Gränssnitt för lagringsenheter som stöds:	M.2, SATA III
Antal Thunderbolt-portar:	2
Komponent för:	PC
LAN-kontroller:	Killer E3100G
Typer av RAID:	0, 1,5, 10
Antal SATA III-kontakter:	8
Icke-ECC:	Ja
Kompatibla processorer:	Intel Core i5, Intel Core i7, Intel Core i9
Minnestyper som stöds:	DDR5-SDRAM
Max. antal SMP-processorer:	1
Wifi:	Ja
Typer av lagringsenheter som stöds:	HDD & SSD
Moderkort chipset familj:	Intel
Moderkorts formfaktor:	Verlengd ATX
Antal minnesplatser:	4
BIOS-typ:	UEFI AMI
BIOS-minnesstorlek:	256 Mbit
Anslutning för CPU-kylare:	Ja
ATX-strömkontakt (24-stift):	Ja
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
Obuffrat minne:	Ja
USB 3.2 Gen 1 (3.1 Gen 1) anslutningar:	2
TPM-kontakt:	Ja
Antal M.2 (M) platser:	1
RGB LED anslutningsskena:	Ja
PCI Express x16 (Gen 4.x)-platser:	1
USB 3.2-kontakter (3.1 Gen 2):	1
PCI Express x16 (Gen 5.x)-platser:	2