Aluratek Bluetooth Wireless TV Streaming Kit Bruksanvisning
Aluratek
Bluetooth-mottagare
Bluetooth Wireless TV Streaming Kit
Läs nedan 📖 manual på svenska för Aluratek Bluetooth Wireless TV Streaming Kit (1 sidor) i kategorin Bluetooth-mottagare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
TV & Stereo
Receivers
Or connect to any
device with RCA OUT
(RCA cable included).
Transmit audio up to 33’
away to any Bluetooth
audio device.
TV
Works up to 10 hours
on a full charge.
Connect to any audio output
device with an AUX OUT (3.5 mm)
or headset port (3.5 mm).
Computer MotorcycleMP3 Player
Bluetooth Transmitter
Bluetooth HeadphonesBluetooth Earbuds Bluetooth Speakers
Warranty
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Package ContentsIntroduction
Using the Transmitter with Other Devices
Bluetooth Transmitter - Product Highlights Bluetooth Transmitter - Device Operation Bluetooth Transmitter - Device Operation (using with other devices)
Bluetooth Headphones - Product Highlights Bluetooth Headphones - Device Operation Bluetooth Headphones - Device Operation (using with other devices)
Using the Transmitter and Headphones with a TV
Technical Support
qsg Q10402 Copyright © 2016 Aluratek, Inc. All Rights Reserved.
aluratek.com
model ABT01FKIT
Quick Start Guide
Wireless TV Streaming Kit
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
USB Charging Cable
(x2)
Registration Card
RCA-Y Cable 3.5 mm Cable
Charging port
(cable Included)
LED status
indicator
3.5 mm Stereo Jack
Connect to any audio output
device with an AUX OUT /
headset (3.5 mm) port or connect
to any device with RCA OUT
(RCA cable included)
Note: If you want to use ABT01F while charging, please make sure to connect the charging
cable first before powering on ABT01F.
Power ON / OFF / Pairing Button
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABT01F
before you begin using it.
Note: Using ABT01F “out of the box” will not harm the device. You will experience reduced battery life as the unit
will not be fully charged.
Connect the USB end of the cable provided to your PC or USB power adapter (not
included) and the charger plug to the charging jack of ABT01F. Please charge the battery
for a minimum of (3) hours. The Red LED will be on while charging. When charging is
complete, the red LED will turn off.
Function Operation LED Indicator
Power On Press and hold Power button for 3-5 seconds Blue LED
Enter Pairing
Mode
Ensure ABT01F is turned Off. Press and hold
Power button for 8-10 seconds until LED
flashes red and blue alternately
LED flashes red
and blue alternately
Power Off Press and hold Power button for 5-7 seconds Red LED turns to
Blue LED
Note: The pairing mode will last 2 minutes. ABT01F will power off automatically if no devices can be connected
within 2 minutes.
Pairing with Bluetooth receivers such as speaker, earbud, and headset:
Please make sure the device supports A2DP profile. The pairing procedure will vary
depending on the actual device. Please refer to the user guide of your device for detail
instruction. The general pairing procedures are as follows:
1. Make sure ABT01F is turned Off.
2. Activate your device’s Bluetooth function and set your device to pairing mode.
3. Activate ABT01F pairing mode by holding the power button for 8-10 seconds
(LED flashes red and blue alternately).
4. ABT01F and your Bluetooth device will pair automatically
(Please make sure they are next to each other).
5. After conneting successfully, the blue LED will flash.
Note: ABT01F will try to reconnect to the last paired device when it is powered ON / OFF again or when
it is out of range.
Note: ABT01F will not receive any control / feedback from the connected device. Any function on the connected
device such as play / pause will not work on the transmitter.
Note: Your paired device will auto connect to ABT01F. This may take a few seconds to two minutes to reconnect
depending on your device. Note: ABT01FKIT will try to reconnect when it is powered ON / OFF again or when it is out of range.
Note: The pairing mode will last 2 minutes. ABT01FKIT will switch to the standby mode automatically if no
devices can be connected within 2 minutes.
Pairing with the transmitter such as iPhone, smartphone, and tablet:
The pairing procedure will vary depending on the actual device. Please refer to the user
guide of your device for detail instruction. The pairing procedures are as follows:
1. Make sure ABT01FKIT is powered off.
2. Activate ABT01FKIT pairing mode by press and hold the button for 6 seconds.
(Red and Blue LED will flash rapidly)
3. Activate your device’s Bluetooth function and set your device to search for Bluetooth
devices. Select ABT01FKIT when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you
are prompted for PIN, please enter “0000”.
5. If prompted by your device to connect, please select “Yes”.
6. After connecting successfully, the blue LED will flash every 3 seconds.
Note: Please make sure the audio output is set to Bluetooth / ABT01FKIT for audio streaming from the device.
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABT01FKIT
before you begin using it.
Note: Using ABT01FKIT “out of the box” will not harm the device. You will experience reduced battery life as the
unit will not be fully charged.
Connect the larger USB end of the provided cable to your computer / power adapter.
Connect the micro smaller micro USB end to the USB port of ABT01FKIT. Please charge
the battery for a minimum of 6 hours. The Red LED will be on while charging. When
charging is complete, the red LED will turn Blue.
Function Operation LED Indicator
Enter Pairing
Mode
Ensure ABT01FKIT is turned OFF. Press and
hold button for 6 seconds.
Red and Blue LED
flashes rapidly
Power On
/ Off
Press and hold the button until the red
LED flashes.
Red then Off
Add Bluetooth transmitting functionality to any audio output device with a 3.5 mm AUX
OUT / headset output / RCA output jack to Bluetooth enabled headphones and speakers.
Use the Bluteooth Transmitter to transmit audio wirelessly from your TV to the
Bluetooth headphones.
There are two ways to connect the Transmitter:
The Transmitter and Headset are pre-paired and ready for use out of the box. Simply
power on both devices and enjoy!
Connect the Transmitter to the AUX OUT / headset (3.5mm) port on the back
of your TV.
Thank you for choosing Aluratek’s Wireless TV Streaming Kit. In no time you will be able
to use the Bluetooth Transmitter and Bluetooth Headphones together to listen to rich
hi-fidelity stereo sound from your TV - wirelessly!
Please, read this guide thoroughly and follow the installation and operation procedures
carefully to prevent any damage to the unit and / or any of the devices it connects to.
In addition to making sure only quality materials are used for manufacturing, Aluratek is
also dedicated to provide the best customer satisfaction and support.
The product focus of Aluratek is to bring simple yet elegant connectivity solutions to the
consumers to enhance their consumer electronics, communications and computing
experience. Each product is carefully designed with the consumer in mind. Each product
is solution-driven to address the need of the consumers and deliberately planned to
provide the ultimate user experience.
We hope you enjoy your Aluratek product.
Thank you - Aluratek, Inc.
Micro USB
Charging Port
Next / Previous Track
3.5 mm
LINE IN port
Microphone
Answer Call / End Call / Power ON /
Power OFF / Pair Bluetooth Device / Play / Pause
Volume Control /
LED Indicator
Adjustable Headband
Connect the Transmitter using the RCA-Y cable.
When using the included RCA cable to connect to a TV or tuner / receiver,
please make sure you connect to the RCA OUT. Some TV’s may not have an
RCA OUT. Connecting to the RCA IN will not work.
1
RCA-IN /
Line-In
RCA-OUT /
Line-Out
AUX OUT /
3.5 mm headset port
2
Produktspecifikationer
| Varumärke: | Aluratek |
| Kategori: | Bluetooth-mottagare |
| Modell: | Bluetooth Wireless TV Streaming Kit |
Behöver du hjälp?
Om du behöver hjälp med Aluratek Bluetooth Wireless TV Streaming Kit ställ en fråga nedan och andra användare kommer att svara dig
Bluetooth-mottagare Aluratek Manualer
29 Augusti 2024
27 Augusti 2024
27 Augusti 2024
Bluetooth-mottagare Manualer
- Bluetooth-mottagare Yamaha
- Bluetooth-mottagare Gembird
- Bluetooth-mottagare Logitech
- Bluetooth-mottagare Hama
- Bluetooth-mottagare Bigben Interactive
- Bluetooth-mottagare Naxa
- Bluetooth-mottagare T'nB
- Bluetooth-mottagare Marmitek
- Bluetooth-mottagare Monoprice
- Bluetooth-mottagare Vantec
- Bluetooth-mottagare Audioengine
- Bluetooth-mottagare Wavemaster
Nyaste Bluetooth-mottagare Manualer
25 September 2024
19 September 2024
19 September 2024
19 September 2024
Audioengine B1 Premium Bluetooth Music Receiver Bruksanvisning
16 September 2024
1 September 2024
19 Augusti 2024
17 Augusti 2024
10 Augusti 2024
6 Augusti 2024