Argox AS-8000 Bruksanvisning
Argox
Streckkodsläsare
AS-8000
Läs nedan 📖 manual på svenska för Argox AS-8000 (99 sidor) i kategorin Streckkodsläsare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/99
NOTICE:
This equipment has been tested and complied with
the limits for a Class a digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide a reasonable protection against harmful
interface when the equipment is operated under a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interface to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interface in
which case the user will be required to correct the
interface at his own expenses.
Note: All brands and trademarks shall belong to their
respective owner.
Note: Specification is subject to changes without
notice.
This device complies with Part 15 of the FCC Rules.
Operation shall be subject to the following two
conditions:
(1) This device may not cause harmful interface, and
(2)
This device must accept any interface received,
including interface that may cause undesirable
operation.
Using the ArgoxScan 8000
The ArgoxScan can automatically scan barcode at a distance.
Simply aim and pull the trigger. Code scanning is performed
along the center of the light bar emitted from the reading
window. This bar must cover the entire code.
Successful scanning shall be obtained by tilting the scanner
with respect to the barcode to avoid direct reflections that
impair the reading performance.
Recommended Steps
When the required settings have been configured, all settings
are stored in non- volatile memory of scanner after reading
EXIT Label. Recommended steps are as follows.
1) Host interface will be automatically detected. User does
not need to set host interface for the scanner.
2) Set interface to optimize protocol of scanner with your
host in interface section.
3) Set system control of scanner, such as specific
adjustments double confirm, power saving, indicator
and scanning mode which you prefer usage in system
control section.
4) Set code options of scanner for your usage in code
option section. You must make sure to enable the
symbology first, then Min./Max. code length, code ID
checksum and truncate digits are also converted.
5) Set string format of the scanner, such as preamble,
postamble Prefix, suffix, code ID and code name
transmission for your application in string format
section.
Note: If still not work properly. Please contact your dealer for
further information.
CONTENTS
Chapter 1 Introduction
Introduction…………………………..……………….
1
Default Setting.……………………………………….
2
ArgoxScan8000 specification.……………………..
3
Programming the ArgoxScan 8000 Series Scanner
6
Chapter 2 Parameter Setting
Interface……………………………………………….…
8
Interface Selection.…………………………………..
8
Keyboard wedge.…………………………………….
9
RS-232.…………………………………………….….
14
Pin Assignments.…………………………………….
17
System Control……………………………………….
18
Indication. ……………………………………………
18
Transmission…………………………………………
20
Scan.………………………………………………….
24
String Setting……………………..…………………
28
Code Option…………………………………….………
32
UPCA.……………………………………..………….
32
UPCE …………………………………………………
36
EAN-13.……………………………………………….
40
EAN-8 …………………………………………………
44
Code 39 ………………………………………………
48
Interleaved 2 of 5 ……………………………………
52
Industrial 2 of 5 ………………………………………
54
Matrix 2 of 5 Eur ……………………………………
56
Codabar ………………………………………………
58
Code-128 ……………………………………………
61
Code-93 ………………………………………………
65
Code-11.………………………………………….……
68
MSI/Plessey.………………………………………….
70
UK/Plessey.…………………………………………..
72
Produktspecifikationer
| Varumärke: | Argox |
| Kategori: | Streckkodsläsare |
| Modell: | AS-8000 |
Behöver du hjälp?
Om du behöver hjälp med Argox AS-8000 ställ en fråga nedan och andra användare kommer att svara dig
Streckkodsläsare Argox Manualer
18 September 2024
18 September 2024
18 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
Streckkodsläsare Manualer
- Streckkodsläsare Casio
- Streckkodsläsare Honeywell
- Streckkodsläsare Motorola
- Streckkodsläsare Renkforce
- Streckkodsläsare Manhattan
- Streckkodsläsare IFM
- Streckkodsläsare Digitus
- Streckkodsläsare Olympia
- Streckkodsläsare Deltaco
- Streckkodsläsare Intermec
- Streckkodsläsare Zebra
- Streckkodsläsare Datalogic
- Streckkodsläsare Adesso
- Streckkodsläsare Brady
- Streckkodsläsare Baracoda
- Streckkodsläsare Posiflex
- Streckkodsläsare Datamax-O'neil
- Streckkodsläsare CipherLab
- Streckkodsläsare Newland
- Streckkodsläsare DENSO
- Streckkodsläsare Socket Mobile
- Streckkodsläsare QUIO
- Streckkodsläsare EC Line
- Streckkodsläsare Qoltec
- Streckkodsläsare Approx
- Streckkodsläsare Wasp
- Streckkodsläsare Vultech
- Streckkodsläsare Mach Power
- Streckkodsläsare Psion
- Streckkodsläsare Koamtac
- Streckkodsläsare Unitech
- Streckkodsläsare Opticon
- Streckkodsläsare Atlantis Land
- Streckkodsläsare ID-Tech
- Streckkodsläsare Code
- Streckkodsläsare Qian
- Streckkodsläsare Bluebird
Nyaste Streckkodsläsare Manualer
27 Oktober 2024
23 Oktober 2024
21 Oktober 2024
20 Oktober 2024
19 Oktober 2024
11 Oktober 2024
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024