Argox AS-8020CL Bruksanvisning

Argox Streckkodsläsare AS-8020CL

Läs nedan 📖 manual på svenska för Argox AS-8020CL (18 sidor) i kategorin Streckkodsläsare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/18

NOTICE:

This equipment has been tested and complied with

the limits for a Class a digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to

provide a reasonable protection against harmful

interface when the equipment is operated under a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the

instruction manual, may cause harmful interface to

radio communications. Operation of this equipment in

a residential area is likely to cause harmful interface in

which case the user will be required to correct the

interface at his own expenses.

Note: All brands and trademarks shall belong to their

respective owner.

Note: Specification is subject to changes without

notice.

This device complies with Part 15 of the FCC Rules.

Operation shall be subject to the following two

conditions:

(1) This device may not cause harmful interface, and

(2)

This device must accept any interface received,

including interface that may cause undesirable

operation.

Using the ArgoxScan AS-8020CL

The ArgoxScan can automatically scan barcode at a distance.

Simply aim and pull the trigger. Code scanning is performed

along the center of the light bar emitted from the reading

window. This bar must cover the entire code (see “How to

Scan” in page 9).

Successful scanning shall be obtained by tilting the scanner

with respect to the barcode to avoid direct reflections that

impair the reading performance.

Recommended Steps

When the required settings have been configured, all settings

are stored in non- volatile memory of scanner and cradle

after reading EXIT Label. Recommended steps are as

follows.

1) Host interface will be automatically detected. User does

not need to set host interface for the cradle.

2) Set interface to optimize protocol of cradle with your

host in interface section.

3) Set system control of scanner, such as specific

adjustments double confirm, indicator and scanning

mode which you prefer usage in system control section.

4) Set code options of scanner for your usage in code

option section. You must make sure to enable the

symbology first, then Min./Max. code length, code ID

checksum and truncate digits are also converted.

5) Set string format of the scanner, such as preamble,

postamble Prefix, suffix, code ID and code name

transmission for your application in string format

section.

Note: If still not work properly. Please contact your dealer for

further information.













Produktspecifikationer

Varumärke:	Argox
Kategori:	Streckkodsläsare
Modell:	AS-8020CL
Färg på produkten:	Zwart
Sladdlängd:	1.5 m
Strömförsörjning:	220-240V
På / Av knapp:	Ja
Anslutningsteknik:	Bedraad
Genomsnittlig effekt:	12 W
Plug and play:	Ja
Anslutningar:	Line - in
Ljudutgångskanaler:	2.1 kanalen
Fjärrstyrd:	Ja
Subwooferns mått (B x H x D):	130 x 170 x 190 mm
Antal satelliter:	2
Magnetiskt skärmad:	Ja
Surroundhögtalares mått (B x H x D):	90 x 70 x 140 mm