Atlona AT-PA1-IR Bruksanvisning

Atlona Kontroller AT-PA1-IR

Läs nedan 📖 manual på svenska för Atlona AT-PA1-IR (10 sidor) i kategorin Kontroller. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
User Manual
AtlonA
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 2
TABLE OF CONTENTS
1. Introduction .................................................. 3
2. Features .................................................. 3
3. Specication .................................................. 3
4. Audio Connection .................................................. 4
4.1. Default mode .................................................. 4
4.2. Bridge mode .................................................. 4
4.3. Dual-mono mode .................................................. 5
5. Push-Button Controls .................................................. 5
6. RS232 Communication Protocol .................................................. 6
7. Connection & Loop-out Diagram .................................................. 7
8. Safety Information .................................................. 8
9. Warranty .................................................. 9
10. Atlona Product Registration .................................................. 10
www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 3
INTRODUCTION
The Atlona AT-PA100 is an Audio Amplier with 3 Inputs (2 x Stereo, 1 x MIC). The PA100 is based on the digital
amplication circuit (Class-D) and can operate in Stereo mode 2x20w or in Bridge mode (Mono) at 1x40W.
The Atlona amplier has a built-in EQ control to allow you to adjust Bass and Treble and also mix in a Mic signal.
It supports RS232 and IR for remote control which is useful in commercial applications when a 3 rd party control
systems is utilized.
FEATURES:
• Class-D Stereo/Mono Audio Amplier
• 2x20Watt @ 4Ω or 1x40Watt @ 8Ω, amplier can be used to amplify 2 speakers or one speaker
when in Bridge mode.
• Dual-Mono mode combines left and right input channels, outputting a mono signal to 2 speakers.
• Microphone mixer function: A microphone can be mixed in with the line audio output signal and provide a
discreet volume control.
• Two stereo audio inputs, one Microphone input, and Volume/Bass/Treble are controlled by the front panel but-
tons or RS232.
• RS232 control ability provides instant command status.
• Included universal power supply (110Volt~220Volt AC, 50/60Hz) for worldwide compatibility.
SPECIFICATIONS:
Audio Input Audio Output
Input Output2 x stereo audio, 1 x MIC 1 x Amplier, 1 x stereo audio
Input Connector 2 x RCA, 1 x 3.5mm jack,
1 x 6.5mm jack
Output Connector 1 x 3.5mm jack, 1 x Phoenix
connector, 4 pole
Input Impedance Output Impedance>10KΩ 50Ω/stereo, 4~8Ω/Amplier
Audio General
Frequency
Response
20Hz ~ 20KHz >70dB@20Hz~20KHzCMRR
SMR Bandwidth80 dB at maximum output 20Hz ~ 25KHz
Stereo Channel
Separation
>75 dB @ 20 Hz to 20 kHz 1% @ 1 kHz, 0.3% @ 20 kHz THD + Noise
at nominal level
Voltage Gain Power Output32dB 20 Watts X 2 (4 Ω)
Control Parts
Serial Control Port RS-232, 9-pin female connec-
tor
Pin Congurations 2 = TX, 3 = RX, 5 = GND
Remote Front Panel ControlOptional IR remote Optional mountable keypad
Options TCP/IP control via RS232 to TCP/IP adapter
NOTE: All measurement levels are at ±10%.

Produktspecifikationer

Varumärke: Atlona
Kategori: Kontroller
Modell: AT-PA1-IR

Behöver du hjälp?

Om du behöver hjälp med Atlona AT-PA1-IR ställ en fråga nedan och andra användare kommer att svara dig




Kontroller Atlona Manualer

Kontroller Manualer

Nyaste Kontroller Manualer