AXI StreetCup150 Bruksanvisning

AXI Inte kategoriserad StreetCup150

Läs nedan 📖 manual på svenska för AXI StreetCup150 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
User manual
Handleiding bewaren voor later gebruik
Keep instructions for later use
Anleitung zum späteren Gebrauch aufbewahren
Conserver la notice pour usage ultérieur
Guardar estas Instrucciones para su uso future
Conservare l’istruzioni per uso successivo
WARNING
WARNING
CHOKING HAZARD
small parts
Not suitable for children under
36 months
THE TOY IS TO BE ASSEMBLED BY
AN ADULT.
WARNING
Potential hazard description, e.g. In
unassembled state contain potentially
hazardous sharp points, so please
keep out of baby's reach
StreetCup150
A030.402.00
date: 10-2015 www.axi.com info@axi.com
StreetCup150
A030.402.00
2 PCS
1
1
1
2 PCS
2
2 PCS
3
22
3
3
2 PCS
1 PC
2 PCS
4
7
A2 PCS
4
4
6
5
7
AA
5
7
1 PC
6
date: 10-2015 www.axi.com info@axi.com
1. Sort out the different components from each other according to the picture above.
2. Assemble the base (4, 5, 6, 7) and then assemble the front part (1, 2) of the frame including
the crossbar and the L-bend pipes. The push buttons help in securing the pipes into position.
3. The back supports (3) must be assembled after step 2 has been completed.
4. The open end of back support ts into the pipe collar on the rear connectors welded on the
base of the goalpost. The top and front part of the back support must be secured with the L-bend
pipes using the bolt (A). The bolt can be tightened using an Allen Key (included in the kit).
5. Unfasten all the zippers and/or hook & loop connectors on the net.
The zipped sleeves are tted on the front crossbar and on the rear crossbar of the goalpost.
NOTE:If you are standing opposite the goalpost and facing it from the front, the print on the
net and on the top/front crossbar sleeve must be facing you. Invert the net if this is not the case.
6. The sleeves with hook and loop fasteners sewn on them
wraps around the 2x vertical side supports (on the front)
and the 2x horizontal side supports (on the base) respectively.
7. The Target Wall shall be secured on the front of the goalpost
by meshing the hook and loop fasteners on the wall with
the fasteners on the net.
8. The elastic loops wrap around the radius of the L-bent pipes
and then secured into place using the buttons.
The goalpost is now ready to use.
StreetCup150
A030.402.00
ASSEMBLY
1
1
22
3
3
4
4
6
5
7
AA
7
date: 10-2015 www.axi.com info@axi.com

Produktspecifikationer

Varumärke: AXI
Kategori: Inte kategoriserad
Modell: StreetCup150

Behöver du hjälp?

Om du behöver hjälp med AXI StreetCup150 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad AXI Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer