Barox PC-INJ-30W Bruksanvisning

Barox Nätverkskort/adapter PC-INJ-30W

Läs nedan 📖 manual på svenska för Barox PC-INJ-30W (8 sidor) i kategorin Nätverkskort/adapter. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
User Manual
Industrial Injector
PC-INJ-30W
PC-INJ-30W-B
PC-INJ-60W
PC-INJ-60W-B
PC-INJ- -B95
Version 11.2019
2
Introduction
This rugged designed industrial PoE injector is equipped with a 30W/60W/95W PSE port. This
PSE port can be powered by 48-56 VDC input voltage. With its multi-purpose design, it can also
be Din-Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance,
traffic monitoring and security applications in critical environments. It can tolerate -40°C to 75°C
in harsh environments to perform a reliable network. This product has been rigorously tested in
harsh environments for your security, transportation, and telco applications.
Note
Always make sure the total length of the TX cable DOES NOT exceed 100 meters. Total length
is defined as length A + length B.
Length A + Length B < 100 meters
POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100
meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more
reliable the network will be. When connecting to a poor-quality PD, it cannot generate a strong
enough signal for the remote switch. Always make sure you have a high-quality PD to perform
your desired network.
A
B
PD
Remote Switch
3
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and -mount brackets are wall
included.
Power connection
This unit provides a 4 pin terminal block. It can be operated using 48-56VDC power source.
Always make sure your input voltage is within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,
+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a
neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
STEP 1 – Take out 4 pin terminal block located in
the included mounting kit package.
STEP 2 – Connect power wires to +V1- or +V2-
with corresponding polarity. Connect the
grounding wire to the ground screw.
STEP 3 – Plug into terminal block socket shown
above. Polarity needs to match V+ and V-.
WARNING Always SHUT OFF power source to connect power wire.--
WARNING Any exceeded input voltage will not make this unit function and may --
damage this unit.
+V1- +V2-

Produktspecifikationer

Varumärke: Barox
Kategori: Nätverkskort/adapter
Modell: PC-INJ-30W

Behöver du hjälp?

Om du behöver hjälp med Barox PC-INJ-30W ställ en fråga nedan och andra användare kommer att svara dig


Nätverkskort/adapter Barox Manualer

Barox

Barox PC-INJ-30W Bruksanvisning

14 September 2024
Barox

Barox PC-INJ-60W-B Bruksanvisning

14 September 2024
Barox

Barox PC-INJ-30W-B Bruksanvisning

14 September 2024
Barox

Barox PC-INJ-95-B Bruksanvisning

14 September 2024

Nätverkskort/adapter Manualer

Nyaste Nätverkskort/adapter Manualer

Cambium Networks

Cambium Networks CG52A Bruksanvisning

26 Oktober 2024
StarTech.com

StarTech.com ST1000SPEXD4T Bruksanvisning

23 Oktober 2024
Devolo

Devolo MicroLink dLAN duo Bruksanvisning

16 Oktober 2024
Edimax

Edimax HP-5001K Bruksanvisning

16 Oktober 2024
LevelOne

LevelOne FNC-0109TX Bruksanvisning

14 Oktober 2024
Edimax

Edimax EW-7822ULC Bruksanvisning

9 Oktober 2024
ZyXEL

ZyXEL AP Configurator Bruksanvisning

6 Oktober 2024
Linksys

Linksys AE1000 Bruksanvisning

6 Oktober 2024
Trendnet

Trendnet TEW-624UB Bruksanvisning

5 Oktober 2024
Nec

Nec NP06LM Bruksanvisning

4 Oktober 2024