Barox PC-INJ-60W-B Bruksanvisning

Läs nedan 📖 manual på svenska för Barox PC-INJ-60W-B (7 sidor) i kategorin Nätverkskort/adapter. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
User Manual -INJ- -B Voltage Boosted Series: PC 30
Version 1.2019
Page /2 7
NOTE
Always make sure the total length of the TX cable DOES NOT exceed 100meter. Total length
is defined as length A + length B
Length A + Length B < 100 meters
POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100
meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more
reliable the network will be. When connecting to a poor-quality PD, it cannot generate strong a
enough signal for the remote switch. Always make sure you have a high-quality PD to perform
your desired network.
Introduction
This rugged designed industrial PoE injector is equipped with a 30W PSE Port. The Injector
can be powered by -56 VDC input voltage. With its multi-purpose design, it can also be Din-24
Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance, traffic
monitoring and security applications in critical environments. It can tolerate -40°C to 75°C in
harsh environments to perform a reliable network. This product has been rigorously tested in
harsh environments for your security, transportation, and telco applications.
PD
Remote Switch
A
B
Page /3 7
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted brackets
are included.
Power connection
This unit provides a 4 pin terminal block. It can be operated using -56VDC power source. 24
Always make sure your input voltage is within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,
+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a
neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
STEP 1 – Take out 4 pin terminal block located in the
included mounting kit package.
STEP 2 – Connect power wires to +V1- or +V2- with
corresponding polarity. Connect the grounding wire to
the ground screw.
STEP 3 – Plug into terminal block socket shown
above. Polarity needs to match V+ and V-.
WARNING Always SHUT OFF power source to --
connect power wire.
WARNING Any exceeded input voltage will not make this unit function and may --
damage this unit.
Wall mount
bracket x 2
4 pin Terminal Block x1
Philips Head Screw x 4
Din Rail Bracket x 1

Produktspecifikationer

Varumärke: Barox
Kategori: Nätverkskort/adapter
Modell: PC-INJ-60W-B

Behöver du hjälp?

Om du behöver hjälp med Barox PC-INJ-60W-B ställ en fråga nedan och andra användare kommer att svara dig




Nätverkskort/adapter Barox Manualer

Nätverkskort/adapter Manualer

Nyaste Nätverkskort/adapter Manualer