Canarm Duke CF52DUK3BN Bruksanvisning

Canarm Fläkt Duke CF52DUK3BN

Läs nedan 📖 manual på svenska för Canarm Duke CF52DUK3BN (12 sidor) i kategorin Fläkt. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
“ for purchasing our product. It is our policy to furnish you with high quality Thank you”
products at a fair price. With proper installation your fan should provide you with years of
money saving comfort.
This fan is guaranteed to be free from defects in workmanship and Material for a period
of five (5) years from date of purchase. Within the first (1) year from date of purchase any
defective product should be returned to your along with proof of purchase. RETAIL OUTLET
For the balance of the warranty, four (4) years, the MOTOR WINDINGS ONLY shall be free
of defects. We will correct such defects or replace the motor assembly at our option if the
product is returned, , to us. The returned fan must be accompanied by FREIGHT PREPAID
your proof of purchase and a cheque for $20.00 for handling and labour charges. All costs of
removing and re-installing the product are YOUR RESPONSIBILITY damage to any part as
such by accident, misuse, improper installation or by affixing any accessories IS NOT covered
by this warranty. As a result of varying climatic conditions in our area this warranty does not
cover any changes in finishes, including rusting, pitting, corroding, tarnishing or peeling.
WARRANTY VOID: In cases of alteration, abuse, installation not in accordance with
5 YEAR LIMITED WARRANTY
11/16
CF-24
LED
01/20
instructions or REMOVAL of the CSA Sticker.
I
IN
NS
ST
TA
AL
LL
LA
AT
TI
IO
ON
NI
IN
NS
ST
TR
RU
UC
CT
TI
IO
ON
NS
S
NOTE: FOR OPTIMUM QUIETNESS, FULLY ASSEMBLE FAN AND RUN 24 HOURS
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC,
NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.
Consult a qualified electrician if you are not familiar with wiring.
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
TOOLS AND MATERIALS REQUIRED
- Philips Screw Driver
- Blade Screw Driver
- Step Ladder
- Wire Cutters
- Wiring supplies as required by electrical code.
Questions or Concerns Contact At The Following Numbers Before Returning Product
To The Store:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
2555 Rue Bernard
Lefebvre Laval, Quebec
H7C 0A5
PH: (450) 665-2535
FX: (450) 665-0910
2157 Parkedale Ave.,
Brockville, Ontario
K6V 5V6
PH: (613) 342-5424
FX: (613) 342-8437
MOUNT SERIESDOWNROD
Pg. #11
Pg. #2
SAFETY PRECAUTIONS
1. Turn off power at main electrical service box before starting installation.
2. Electrical connections must comply with local code ordinances, national
electrical codes, CEC, NEC and ANSI/NFPA 70.
3. Make sure the installation site you choose allows the fan blades to rotate
freely without any obstructions.
4. When mounting the fan on a ceiling outlet box, Use an approved (CSA for
Canada and UL for U.S.) ceiling fan box marked " ". FOR FAN SUPPORT
5. WARNING: To reduce the risk of fire, electric shock, or personal injury,
mount fan only to an outlet box marked acceptable for fan support and use
mounting screws provided with the outlet box. Most outlet boxes commonly
used for the support of lighting fixtures are not acceptable for fan support
and may need to be replaced. Consult a qualified electrician if in doubt.
Ensure the outlet box is securely installed in place such that it is able to
support at least the fan weight.
.)sbl 85.01(sgk 8.4 etamixorppa"25 :ecnerefeR roF thgieW naF latoT.6
-
- Mount
floor or
-DO
be
chain
WARNING
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL
INJURY, MOUNT TO OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT
AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX.
with the lowest moving parts at least Meters (7 Feet) above
2.10
grade level.
NOT operate reversing switch while fan blades are in motion. Fan must
turned
off
and
rotating
blades
stopped,
reverse
chain
pulled,
the
speed
pulled
again
to
start
in
the
opposite
direction.
REMOTE CONTROL
①
②
A Pair of NO.7 battery of emitter (1.5V)
LED indicated light
ON/OFF the fan
③ ① ⑤ Speed of the fan ( low speed — high speed)
④ Timing control of the fan
Short press: ON/OFF the light
⑤
⑥ Direction of the fan (reverse switch)
⑦Long press(hold for 3 seconds): Dimming
⑧
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee
of this device could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: CANARMNA
Responsible Party
CanarmInc.
808 Commerce Park Drive, Ogdensburg, New York, USA 13669
1-800-267-4427
FCC:BTR66.181.19.0001.35
ICES-005:BTR66.181.19.0001.35-1
Pg. #3
Pg. #10
WARNING: Ensure that all connections, set screws and screws are
securely tightened before the next step.
To clean the fixture, turn off the power, wait for it to cool, and wipe the
fixture with a clean, soft cloth.
LIGHT KITS
7.
Fig.9c
ASSEMBLY DRAWING
A. Mounting Bracket
B. Canopy
C. Downrod Assembly
D. Yoke Cover
E. Fan Motor Assembly
F.
G. Glass Panel
H.
A.
B.
C.
D.
E.
G.
F.
J.
Fig.1
Light Kit
I.
H. Diffuser
I. Remote Control
J. Fan Blade
Motor
KitLight Kit
Diffuser
TROUBLESHOOTING
TROUBLE SUGGESTIONS
1. Fan will not start
- Check wiring connections in switch housing.
CAUTION: Turn power off for last two items.
2. Fan sounds noisy - Check to make sure that all screws in motor housing are snug.
- Check to make sure that blade bracket screws are tight.
- Check to make sure that wire nuts in switch housing
are not rattling against wall of switch housing.
- If fan has a light kit make sure switch housing
screws and set screws are tight.
- Some fan motors are sensitive to signals from solid
state variable controls. If solid state controller is
used, change to an alternative control. (See a
representative for a list of available controls.)
- Allow a 24 hour break in period to eliminate most noises.
3. Fan wobbles - Check that all blades are screwed firmly into blade brackets.
or shakes
excessively.
- Check that blade brackets are secured firmly to motor.
- Check distance from tip of blades to ceiling.
- Check distance between blade tip to blade tip. All
measurements should be equal. Loosen blade
screws and position blade until even then re-tighten.
- Check that the downrod hemisphere notch is engaged in canopy.
- Check to make sure that jam screws in downrod are tightened.
- Make sure canopy and mounting bracket are
tightened securely to wooden joist.
- Make sure warpage has not occurred in Fan
blades. If so, contact the customer service department
for replacement parts.
A.
B.
C.
D.
E.
J.
I.
H.
For model Duke For model Hollyn
- Check fuses and circuit breakers.
- Check wiring connections to fans.

Produktspecifikationer

Varumärke: Canarm
Kategori: Fläkt
Modell: Duke CF52DUK3BN

Behöver du hjälp?

Om du behöver hjälp med Canarm Duke CF52DUK3BN ställ en fråga nedan och andra användare kommer att svara dig


Fläkt Canarm Manualer

Canarm

Canarm Lawson CF48LAW4BN Bruksanvisning

3 Januari 2025
Canarm

Canarm Duke CF52DUK3BN Bruksanvisning

3 Januari 2025
Canarm

Canarm Foley CF48FOL4WH Bruksanvisning

3 Januari 2025
Canarm

Canarm Duffy CF52DUF5BK Bruksanvisning

3 Januari 2025
Canarm

Canarm AX12-1VHE Bruksanvisning

9 September 2024
Canarm

Canarm ALX135-DD050V Bruksanvisning

9 September 2024
Canarm

Canarm AX30-2 Bruksanvisning

9 September 2024
Canarm

Canarm Wallis Bruksanvisning

9 September 2024
Canarm

Canarm ALX090DD Bruksanvisning

9 September 2024
Canarm

Canarm AX18-1V Bruksanvisning

9 September 2024

Fläkt Manualer

Nyaste Fläkt Manualer

Duux

Duux Whisper Essence Bruksanvisning

5 Januari 2025
Listo

Listo VT-T 23L5 Bruksanvisning

5 Januari 2025
Listo

Listo VT-C 77L Bruksanvisning

5 Januari 2025
Listo

Listo VT-P 40L Bruksanvisning

5 Januari 2025
Be Quiet!

Be Quiet! Light Wings LX Bruksanvisning

4 Januari 2025
Biltema

Biltema 83-020 Bruksanvisning

4 Januari 2025
Gutfels

Gutfels VB 37058 ch Bruksanvisning

3 Januari 2025
Gutfels

Gutfels VB 37059 ch Bruksanvisning

3 Januari 2025
Hunter

Hunter Crystal Peak Bruksanvisning

3 Januari 2025
Hunter

Hunter Malden Bruksanvisning

3 Januari 2025