Celestron Neximage 10 Solar System Color Imager Bruksanvisning

Celestron Kamera Neximage 10 Solar System Color Imager

Läs nedan 📖 manual på svenska för Celestron Neximage 10 Solar System Color Imager (12 sidor) i kategorin Kamera. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
NexImage
USER’S MANUAL
Model #93708, #93711
#95518, #95519
ENGLISH
2 | ENGLISH
Congratulations on your purchase of the Celestron NexImage
Solar System imaging camera.
Your NexImage camera comes with the following:
+ NexImage Camera
+ 1.25” nose piece
+ CD including NexImage iCap and RegiStax processing software
+ USB Cable
Recommended Minimum System requirements:
+ Pentium IV, 2.0 GHz, 1GB RAM
+ Graphics card with 24 or 32 bit
+ Windows XP, Windows Vista, Windows 7 (32 & 64 bit)
+ DirectX 9.0c or higher
1.25”
Nose Piece
USB CableNexImage Camera NexImage iCap and
Registax processing
software
Fig 1
ENGLISH | 3
Quick Start
1. Place the CD into your computer’s
CD-ROM drive.
2. Install both the NexImage iCap and
RegiStax software onto your computer.
3. Thread the 1.25” nose piece into the body
of the NexImage camera. See Fig 2.
4. Slide the 1.25” nose piece of the camera
into the eyepiece barrel of your telescope.
See Fig 3.
5. Plug the small end of the USB cable into
the port on the back of the camera.
6. Plug the other end of the USB cable
into a USB port on your computer.
Once connected, the Found New
Hardware message will appear. Follow
the Installation Wizard until the device
has been successfully installed.
Fig 2
Fig 3

Produktspecifikationer

Varumärke: Celestron
Kategori: Kamera
Modell: Neximage 10 Solar System Color Imager
Vikt: 2500 g
Ljudnivå: 31 dB
Strömförsörjning: 100 - 240V, 50 - 60 Hz
Anslutningsteknik: Bedraad
Ethernet LAN: Nee
Typiskt kontrastförhållande: 2000:1
Projektorns ljusstyrka: 2200 ANSI lumens
Projektionsteknik: DLP
Projektorns inbyggda upplösning: XGA (1024x768)
Lämplig för skärmstorlekar: 24 - 300 "
Projektionsavståndsmål: - m
Antal färger: 16.78 miljoen kleuren
Frekvensområde horisontellt: 31 - 82 kHz
Frekvensområde vertikalt: 48 - 85 Hz
VGA (D-Sub) port(ar): 2
Typ av seriell anslutning: RS-232
Audio-ingan (L, R): 1
PC-ljud ingång: Ja
Kompositvideoingång: 1
Komponenter för video (YPbPr/YCbCr): 1
S-videoingång: 1
DVI-port: Nee
Brännvidd: 20.7 - 22.8 mm
Ljuskällans livslängd: 4000 uur
Typ av ljuskälla: Lamp
Inbyggda högtalare: Ja
Genomsnittlig effekt: 2 W
Antal inbyggda högtalare: 1
Strömförbrukning (i standby): - W
Analog signalformat: NTSC, PAL, SECAM
RS-232 port: 1
Lampkraft: 200 W
Bildförhållande: 4:3, 16:9
Plug and play: Ja
Mått (B x D x H): 106.3 x 251 x 239 mm
Fjärrkontroll ingår: Nee
Wifi: Nee
Strömförbrukning (typiskt): 285 W

Behöver du hjälp?

Om du behöver hjälp med Celestron Neximage 10 Solar System Color Imager ställ en fråga nedan och andra användare kommer att svara dig




Kamera Celestron Manualer

Kamera Manualer

Nyaste Kamera Manualer