Champion SBT360 Bruksanvisning

Champion högtalare SBT360

Läs nedan 📖 manual på svenska för Champion SBT360 (30 sidor) i kategorin högtalare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/30

Introduktionsguide | Introduktionsguide

Introduksjonsguide | Aloitusopas

Welcome Guide

IMPORTANT

All instructions should be read carefully before operation and

follow the instructions

Keep this product and accessories away from excessive heat

The user should not attempt to repair the speaker. Contact

Champion Support for assistance

No sharp object should be subjected to the speaker/speakers

drivers as it may damage the speaker

Only use soft cloth, no harsh abrasives or chemicals to clean, as it

may damage the surface finish

The power adapter should be unplugged from the power outlet

when the speaker is unused for a long period of time.

Ensure the speaker is waterproof be removing all the connected

cables and the cap is tightly closed before exposing the speaker

to liquid.

Do not use the speaker to water while charging, as doing so may

result in damage to the speaker or the power source.

IPX6 – Protection assured against light splashing of water. Must

not immerse in water.

Charging instruction

Please use a 5V/2A power adapter for charging the speaker

The progressive white LED indicator indicates the battery

charging status. The LED will stop blinking once the speaker gets

fully charged.

Speaker can play music while it is charging.

Charging time may increase if the music played and kept for

charging simultaneously.

Please don’t try to charge the speaker using the Powerbank

function.

Product overview

AUX 3.5mm input port

Micro-USB input charging mode

USB-A output powerbank charging port

Thread hole (M5) for mount accessories (no accessories included).

Accessories with M5 can be used.

Product overview

Power ON/OFF

Volume down/previous track

Status Mode LED-indicator

Volume up/next track

Disconnect Bluetooth pairing mode/

enter bluetooth pairing mode

TWS button

Battery status LED indicator

Play/pause/accept calls/

reject calls

TWS LED-indicator

AUX-IN connectionBluetooth Pairing

Step 1: Long press for 3 seconds to power on. The speaker goes

to Bluetooth pairing mode automatically. The blue LED blinks.

Step 2: Find SBT360 in your Bluetooth name list and select it.

Step 3: 2 prompt tones and the LED stays blue, the pairing is

successful.

MY DEVICES

Bluetooth

SBT360

Power ON/OFF

Output

Powerbank function

Connect your mobile phone with a USB cable to power up your

phone. The battery is total 4400 mAh and support approximately

1-time single charge.

Note: using the powerbank will affect the speakers play time.

Pairing two speakers

(TWS function, optional with another speaker of the same model).

The speaker features 1 AUX audio in port, simply connect the

speaker with your mobile phone/MP3 Player/PC/Laptop with

3.5mm jack audio cable. The status LED indicator will turn green

and you can play music via wired connection.

SBT360 can be played as a single speaker or as a true wireless

stereo speaker (2 speakers connected with each other).

TWS paring:

If you purchase an additional SBT360, you can pair them

together for optimal stereo sound by following steps:

Make sure that your device is not connected to either speaker.

Turn on both speakers and short press the TWS button on both

speakers. The LED indicator will flash white, the two speakers will

automatically pair and the LED indicator will stay lit.

Please follow the Bluetooth pairing steps.

(Note: both speakers will appear in your Bluetooth model list,

connect to either of them).

Disconnect the TWS paring:

Long press the TWS button on either of the speaker to enter

single speaker mode.

TWS Button

Long press for 3 seconds to Power ON/OFF; Short press it

to check the battery status.

Short press to Play/Pause. For incoming calls, short press

to pick up/hang up; Long press to reject the incoming call.

Short press for volume up; long press for next track.

Short press for volume down; long press for previous track.

Short press to disconnect Bluetooth connection.

Buttons

Bluetooth mode

Long press for 3 seconds to Power ON/OFF; Short press it

to check the battery status.

Short press for volume up

Short press for volume down

AUX-IN Mode

Produktspecifikationer

Varumärke:	Champion
Kategori:	högtalare
Modell:	SBT360
Färg på produkten:	Black, Stainless steel
Vikt:	107 g
Höjd:	69 mm
Material:	Aluminium
Varumärkeskompatibilitet:	Raspberry Pi
Kompatibilitet:	Raspberry Pi
Typ produkt:	Opbergtas