Crestron PP-100-W Bruksanvisning

Crestron Smarth hem PP-100-W

Läs nedan 📖 manual på svenska för Crestron PP-100-W (2 sidor) i kategorin Smarth hem. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

quickstart guide

www.crestron.com

Specifications subject to

change without notice.

QUICKSTART DOC. 7676B (2043124) 04.16

Crestron Home Beacon Setup App

CRESTRON-PINPOINT

1Introduction

The CRESTRON-PINPOINT app configures PP-100 PinPoint™

Proximity Detection Beacons for use with a Crestron® system.

Configuration includes pairing PinPoint beacons with rooms and

adjusting the beacons’ range for optimal room coverage. Once

configuration is complete, the app generates a configuration file that is

imported into the CRESTRON-APP and CRESTRON-APP-PAD Control

Apps for Apple® iOS® operating system on the device(s) that will be used

with the PinPoint beacons.

2Download the App

3Create a PinPoint System

Create a PinPoint System for a residence by specifying rooms and

pairing a beacon to each room.

Create a System

1. On the iOS device, tap to start the

app. The Residence List screen is

displayed.

NOTE: If prompted to use your

current location, tap .Yes

2. Tap New Residence. The Room List

screen is displayed.

3. Tap the field and enter Residence Name

the name of the residence where the

system is installed. This field is for user

reference only.

4. Tap the field and CS Friendly Name

enter the information found in the

field of the Friendly Name/Location

CRESTRON-APP or

CRESTRON-APP-PAD app.

Create Rooms

1. Tap New Room to create a room that is

to be configured for PinPoint use. Its

screen is displayed.Room Detail

2. Tap the field and enter the Room Name

name of the room that contains the

PinPoint beacon. Tap Done when

complete.

3. Tap and select the room number Not Set

from the list that matches the SIMPL

Windows program. A system can contain

up to 100 joins; each join connects

with a beacon.

4. Tap Back Room List . The screen is

displayed with the newly created room

entry and the status of its beacon

connection.

5. Repeat steps 1 through 4 for each room

that contains one or more PinPoint

beacons.

Pair Beacons with a Room

Once all of the rooms have been added to the PinPoint system, they are

ready to be paired with the beacons.

1. From the screen, tap a room you Room List

want to pair with a beacon to display its

Room Detail Room Detail screen. When the

screen is displayed, the app begins scanning

for beacons. Any beacon that is discovered

through Bluetooth or that is sending proximity

updates that are received by the app is listed

on the screen. Previously Room Detail

added beacons are also on the list but are

grayed out if they are not detected. Beacons

are displayed with one of the following icons.

● The white icon indicates that the beacon

is unplugged or out of range of the iOS

device.

● The red icon indicates that the iOS device

can see the beacon but is not in the beacon detection area.

● The green icon indicates that the iOS device is within the beacon

detection area.

indicates that the beacon is in Admin mode. When Admin ●

mode times out, the icon changes to a white, red, or green icon if

the beacon has already been paired with the room, or the icon

disappears from the list if it is already paired with another room.

● X indicates that the beacon is available for pairing with the

selected room.

●  indicates that the beacon is already paired with the selected

room. If is displayed (Admin mode), tap the beacon to change

its properties. Refer to section ∫ for more information.

indicates that the beacon is already assigned to another room ●

and cannot be added to the current room.

indicates that a beacon has never been configured or has ●

been reset to the factory settings.

2. While in Bluetooth range of the beacon, plug the beacon into a wall

outlet. The beacon is displayed on the screen with Room Detail

either or shown as its status. Refer to the list of icon definitions in

step 1 for details.

NOTE: The beacon appears on the screen within 15 seconds.

NOTE: To avoid confusion, plug only one beacon in at a time.

NOTE: If the beacon is already plugged in, unplug it and plug it in

again to place it in Admin mode.

CRESTRON-PINPOINT

NOTE: This section provides instructions for downloading the app from

the App Store® online store that is available on an iOS device. The

application can also be downloaded from the App Store using iTunes ®

software on a computer. For detailed information, refer to

www.apple.com/support/itunes/store/apps.

Prerequisites

● Cellular data network (iPhone® and cellular-equipped devices only)

or Wi-Fi® network that is connected to the Internet (Refer to

support.apple.com/kb/TS1398 for Wi-Fi network information.)

● iTunes account (Refer to support.apple.com/kb/HT2731 for

information about setting up an account.)

● Bluetooth® communications enabled on the iOS device

Download the App from the App Store

1. On the iOS device’s home screen, tap the icon ( ). App Store

2. Search for the app:

a. Tap Search.

b. Tap the search field and enter the search term .Crestron

c. Tap Search. The Crestron apps are listed.

3. Tap the Crestron Home® Beacon Setup App and follow the prompts

to download it. The iOS device downloads the app. The app’s icon

( ) appears on the home screen and shows the status of the

download and installation.

Pair Beacons with a Room (Continued)

3. Tap an available beacon (indicated with ) X

to add it to the room. When a beacon is

selected, its configuration screen is displayed.

● Tap the field PinPoint Name/Location

and enter the name or location of the

beacon for easy identification.

● PinPoint Range Move the slider control

to adjust the signal transmission range of

the beacon. To reset to the factory setting,

double-tap the slider control.

● Tap to remove the Remove from room

beacon from the room.

4. Tap Back to return to the previous screen.

5. Repeat the procedure to add each beacon to a room.

A PinPoint beacon’s properties can be edited to update the beacon’s

identification information and range. While the properties are being

edited, the beacon can also be removed from a room. Perform the

following to edit a beacon.

1. From the screen, tap a room to display its Room List Room Detail

screen.

2. Unplug and then plug in the beacon to be edited. The beacon is

placed in Admin mode and is displayed next to the beacon to

be edited.

3. Tap the beacon to be edited. The beacon’s

configuration screen is displayed.

4. Edit the beacon’s properties.

● Tap the field PinPoint Name/Location

and enter the name or location of the

beacon for easy identification.

● PinPoint Range Move the slider control

to adjust the signal transmission range of

the beacon. To reset to the factory setting,

double-tap the slider control.

● Tap to remove the Remove from room

beacon from the room.

5. Repeat steps 1 through 4 to edit each

beacon's properties.

4 Edit a Beacon’s Properties

quickstart guide

www.crestron.com

Specifications subject to

change without notice.

QUICKSTART DOC. 7676B (2043124) 04.16

Crestron Home Beacon Setup App

CRESTRON-PINPOINT

5Evaluate a PinPoint System Configuration

Once the system rooms are configured and PinPoint beacons have been

added to the rooms, check for proper coverage.

1. In the app, navigate to the screen to display the list of Room List

configured rooms.

2. While holding the iOS device, walk slowly through each room that

has been configured with a PinPoint beacon. The room list reorders

itself in real time as the iOS device moves in and out of PinPoint

rooms so that the current room (indicated with a green icon) is

always at the top of the list.

3. While walking through the residence, check for the following:

Verify that multiple PinPoint rooms are not showing a green ●

icon at one time. If there is overlap, reduce the range of one

of the beacons as described in section ∫.

Verify that each PinPoint room is correctly detected as the ●

current room when the iOS device is in the desired coverage

area. If a room is not correctly detected, increase the range of

the beacon as described in section ∫ or add additional PinPoint

beacons to the room.

7Program PinPoint

To add PinPoint functionality to a SIMPL Windows or Crestron

Studio™ program, add the PinPoint device extender to the Crestron

App programming symbol of the iOS device that will be interacting

with PinPoint.

8PinPoint Reset

To clear pairing information from a PinPoint beacon, it must be reset

to the factory default settings. For details, refer to the PP-100

Installation Guide (Doc. 7735) at www.crestron.com/manuals.

Beacons that have been reset to their factory default settings are

displayed on the screen with a when operating in Room List

Admin mode. If is displayed, the reset procedure should be

repeated.

6Export and Import a PinPoint System

Export a PinPoint System File

Once a PinPoint system has been created, it must be exported to be

used by the CRESTRON-APP or CRESTRON-APP-PAD Control Apps

for Apple iOS. Perform the following to export a PinPoint system.

1. From the in the PinPoint Setup App, tap Residence List Email. An

e-mail message opens with the settings attached in an IBC file.

2. Address the e-mail to an e-mail account on the target iOS device.

3. Send the e-mail message.

Import a PinPoint System File

NOTE: The CRESTRON-APP or CRESTRON-APP-PAD app must be

installed and configured on the iOS device.

PinPoint system files are received via e-mail as an attached IBC file. To

import a PinPoint system file, open the e-mail, and then open the

attachment. The PinPoint System file is automatically imported into the

control app.

NOTE: The CRESTRON-APP or CRESTRON-APP-PAD app must be

restarted after the PinPoint system file has been imported.

Product warranty can be found at www.crestron.com/warranty.

The specic patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For specic information, please visit

www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Studio, and PinPoint are either trademarks or registered trademarks

of Crestron Electronics, Inc. in the United States and/or other countries. Apple, App Store, iPhone, and

iTunes are in the United States and/or other either trademarks or registered trademarks of Apple Inc.

countries. Bluetooth is either a trademark or registered trademark of Bluetooth SIG, Inc. in the United

States and/or other countries. IOS is either a trademark or registered trademark of Cisco Systems, Inc. in

the United States and/or other countries. Wi-Fi is of Wi-Fi either a trademark or registered trademark

Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade

names may be used in this document to refer to either the entities claiming the marks and names or their

products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not

responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Produktspecifikationer

Varumärke:	Crestron
Kategori:	Smarth hem
Modell:	PP-100-W

Behöver du hjälp?

Om du behöver hjälp med Crestron PP-100-W ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Smarth hem Crestron Manualer

Crestron GLS-OIR-W-2500 Bruksanvisning

10 September 2024

Crestron GLS-ODT-W-1200 Bruksanvisning

9 September 2024

Crestron GLS-LCCT Bruksanvisning

9 September 2024

Crestron GLS-PART-CN Bruksanvisning

8 September 2024

Crestron GLS-OIR-C-CN Bruksanvisning

8 September 2024

Crestron PP-100-W Bruksanvisning

8 September 2024

Smarth hem Manualer

Nyaste Smarth hem Manualer

WiZ Smart Bruksanvisning

14 Januari 2025

Ezviz DL03 Bruksanvisning

14 Januari 2025

Ezviz DL04 Pro Bruksanvisning

14 Januari 2025

Ezviz CP5 Bruksanvisning

14 Januari 2025

Kogan KASHTAGSM2A Bruksanvisning

9 Januari 2025

Elro FZ5002611R Bruksanvisning

5 Januari 2025

Rademacher DuoFern Funksender UP 9497 Bruksanvisning

5 Januari 2025

IKEA INSPELNING 805.698.42 Bruksanvisning

4 Januari 2025

Ezviz DL04 Bruksanvisning

2 Januari 2025

Bticino F522 Bruksanvisning

31 December 2025