Crucial M.2 Bruksanvisning

Crucial Solid State-enheter (ssd) M.2

Läs nedan 📖 manual på svenska för Crucial M.2 (5 sidor) i kategorin Solid State-enheter (ssd). Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

Install Guide

Crucial® M.2 Solid State Drive

Equipment Needed

• Crucial® M.2 SSD

• Non-magnetic tip screwdriver

• Your system’s owner’s manual

Special Considerations

To transfer data from an existing M.2 SSD to a new M.2, we

recommend the use of data migration (cloning) software. Data

migration software is available from a variety of third-party

vendors.

Precautions

• Static electricity can damage computer-related components.

To protect your system and your new Crucial M.2 SSD from

damage during the installation process, touch an unpainted

metal surface on your computer’s frame or wear an ESD wrist

strap before handling internal components. Either method

will safely discharge static electricity that’s naturally present in

your body.

• When handling your M.2 SSD, be sure to hold it along the side

edges using your thumb and index ﬁnger. Avoid touching the

components and connectors, as damage can occur.

Ultrabook Installation Instructions

1. Make sure you’re working in a static-safe environment.

Remove any plastic bags or papers from your work space.

2. Shut down your system. Once your system has been

powered o, unplug the power cable, then remove the

battery.

3. Hold the power button for 3-5 seconds to discharge

residual electricity.

4. Remove your system’s case cover. Refer to your owner’s

manual for how to do this.

5. To protect your new M.2 SSD and internal components

from static damage during the installation process, touch

an unpainted metal surface on your computer’s frame or

wear an ESD wrist strap before handling the M.2 SSD or

internal components.

6. Locate your computer’s M.2 socket on the motherboard.

Consult your owner’s manual for the exact location.

7. Remove the existing M.2 SSD from the M.2 socket (if

applicable). Refer to your owner’s manual for how to

safely remove the existing M.2 drive.

8. Insert your Crucial M.2 SSD into the M.2 socket according

to the illustrations in this guide. Align the notches on the

M.2 SSD with the ridges in the M.2 socket, then insert as

shown. Do not force the connection.

9. To secure the M.2 drive, hold it along the side edges and

lower it from the raised position until it sits on top of the

support assembly. Then, while holding the M.2 SSD in

position, insert screw into the support assembly,

tightening as necessary to securely fasten the M.2 SSD in

place. Do not overtighten the screw.

10. Once your M.2 drive has been securely fastened, replace

your system’s case cover and reconnect the battery.

Power on your system.

11. If you didn’t migrate data from an existing drive, install

operating system, drivers, utilities, and applications as

needed. Installation is now complete.

Helpful Diagrams for the Installation Process

Produktspecifikationer

Varumärke:	Crucial
Kategori:	Solid State-enheter (ssd)
Modell:	M.2
Enhetsplacering:	Ingebouwd
Typ av operation:	Touch
Färg på produkten:	Zwart
Antal effektnivåer:	9
Bredd:	770 mm
Djup:	520 mm
Höjd:	50 mm
Håll varm funktion:	Ja
Antal brännare/kokzoner:	3 zone(s)
Typ av häll:	Inductiekookplaat zones
Lätt att städa:	Ja
Antal gasbrännare:	0 zone(s)
Antal elektroniska kokzoner:	3 zone(s)
Sjud brännaren/kokzonens diameter:	200 mm
Vanlig brännare/kokzonsdiameter:	280 mm
Sjud brännare/kokzon:	1800 W
Normal brännare/kokzon:	2300 W
Kontrollposition:	Boven voorzijde
Ansluten last (elektrisk):	7400 W
Installationsfackets bredd:	755 mm
Installationsfack djup:	495 mm
Stor brännare/kokzonsdiameter:	280 mm
Stor brännare/kokzon:	2300 W
Boost funktion:	Ja
Restvärmeindikator:	Ja