CTA Digital PAD-CFWM Bruksanvisning

Läs nedan 📖 manual på svenska för CTA Digital PAD-CFWM (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
for 7-14 Inch Tablets
PAD-CFWM
Custom Flex Wall Mount
Package Contents:
3.Adjusting the Flex Arm
Instructions:
2.Installing Custom Flex Wall Mount to the Wall
Custom Flex Wall Mount
4
Foam Pads
2. Loosen ball socket joint to rotate tablet to desired
orientation, then tighten ball socket again.
1.Press quick release button on side of tablet holder
to release the adjustable end. Insert tablet corner
against the spring arm, then push adjustable arm
down against opposite corner. Be sure it is as snug
as possible.
360 rotation˚
4. Installing your Device and Adjusting the Tablet holder
1. Twist the SCREW KNOB of the arms
counter clockwise to release the
connection.
2. Adjust the arms to your favorite position and then
tighten the SCREW KNOB clockwise .
1.Use a pencil to mark hole locations using the mounting
plate holes for reference.
2.Screw up the wall mount
piece to the holes with the
screws and Allen Key.
Hex. Allen Key
Screw x 4
Foam Pad
Thickness
Tablet
Thickness:
1mm 0.67-1.06in
5mm 0.51-0.91in
10mm 0.31-0.71in
17-27mm
13-23mm
8-18mm
Use this table to determine the appropriate
foam pad to use with your tablet.
Note: sizes refer to total tablet size with or without a case.
/
/
/
Select the appropriate foam pad according to the
thickness of your tablet (or tablet in its case), then
press adhesive side into center of the tablet holder.
1mm Foam Pad
5mm
Foam
Pad
10mm
Foam
Pad
1.Attaching Foam Pad to Tablet Holder

Produktspecifikationer

Varumärke: CTA Digital
Kategori: Inte kategoriserad
Modell: PAD-CFWM

Behöver du hjälp?

Om du behöver hjälp med CTA Digital PAD-CFWM ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad CTA Digital Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer