Deante BGJN34M Bruksanvisning

Deante Kran BGJN34M

Läs nedan 📖 manual på svenska för Deante BGJN34M (17 sidor) i kategorin Kran. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/17

INSTRUKCJA MONTAŻU I OBSŁUGI BATERII I ZESTAWÓW

TAP INSTALLATION AND USAGE INSTRUCTION

INSTALLATIONS UND BETRIEBSANLEITUNG DER ARMATUR

ИНСТРУКЦИЯ ПО УСТАНОВКЕ И ОБСЛУЖИВАНИИ СМЕСИТЕЛЯ

MANUEL D’INSTALLATION DE ROBINET

INSTALACE VODOVODNÍCH BATERIÍ A POKYNY K POUŽITÍ

NÁVOD NA INŠTALÁCIU A POUŽITIE

TELEPÍTÉSI ÉS KARBANTARTÁSI ÚTMUTATÓ CSAPTELEPKHEZ

MONTARE DE BATERIE ȘI INSTUCȚIUNI DE UTILIZARE

КЕРІВНИЦТВО ПО МОНТАЖУ ТА ЕКСПЛУАТАЦІЇ ЗМІШУВАЧА

MAIŠYTUVO MONTAVIMO IR NAUDOJIMO INSTRUKCIJA

MONTERINGSANVISNING FOR BATTERI

INSTALLATION & ANVÄNDNINGSINSTRUKTIONER

HANAN ASENNUSOHJE

ŪDENS MAISĪTĀJA MONTĀŽAS UN APKOPES PAMĀCĪBA

UPUTE ZA MONTAŽU I UPOTREBU MIJEŠALICE VODE

NAVODILO ZA NAMESTITEV IN UPORABO BATERIJE

دليل لتثبيت وصيانة الحنفية

www.deante.pl www.deante.eu

X34 M

www.deante.pl www.deante.euwww.deante.pl www.deante.eu

INSTALACJA

www.deante.pl www.deante.eu

INSTALLATION

• Before making any inlet pipe connections, all supply pi-

pes must be throughly flushed to remove debris. Failing to

do this may cause demage of the cartridge or low water

flow.

• The place and way of installation needs to ensure free

access to any possible dismantling and a possibility of car-

rying out maintenance or repair activities.

• The mixer should be installed by a persons with appro-

priate qualifications. For a built-in product, the Purchaser

should check its proper operation before installation in

the presence of the person supervising the operation of

the product. Any possible damage caused as a result of

unprofessional assembly or maintenance is not covered

by warranty.

• Mounting valves on any type of extensions / reducers is

not recommended. Mixer installation should be carried out

using all original components included in the product and

supplied by the producer.

• To purchase parts, contact producer via

zamienne@deante.pl

• In line with a possibility of contamination of the water

which may cause product damages it’s necessary to use

angle, check valves with filters in the connection between

mixer hoses to the installation, or sealing screen for wall

mounted mixers and showers.

• Flexible hoses must not be bent or twisted. Hoses may

only be screwed into the fitting by hand.

• Mixers are intended for indoor installation. Do not allow

the mixer or water inside to freeze.

• It is recommended to turn off the main water valve during

long absence.

• Do not leave the product unattended during a pressure

test.

• It is not advisable to use a thermostatic tap with flow gas

and electric water heaters.

• The Warrantor reserves the right to make production

changes and corrections of the product arising from tech-

nological progress and aesthetic values without prior no-

tice.

• The manufacturer declares that the colour (shade) of a

product from the same line may be slightly different and

is in a similar shade. The difference in shade is not a defect

of the product and may result from the normal production

process.

Requirements for taps other than thermostatic taps:

Requirements for thermostatic taps:

MAINTENANCE

A user is obliged to clean the following on a regular basis:

aerator, ball valves with a filter, tap’s surface, to check con-

nections of hoses, filters.

Recommendation:

• Use a soft cloth

• Do not use chlorine or alcohol based cleaner, strong

acids, bases or solvents

• Do not use cleaner with cleaning beads

• Use biodegradable cleaning agents with a delicate struc-

ture based on fruit acids, ie recommended Deante agents.

• Mixer should be at the room temperature during cleaning

• After cleaning, rinse the washed surface thoroughly to

get rid off residual chemicals and wipe dry.

• Do not use high pressure or steam cleaners

Details of the warranty on www.deante.eu

MIXER MODELS

I - Standing model with a pull-apart spout

II - Wall model

III - Standing model

IV, V, VI - Flush-mounted model

VII, VIII - Standing multi-hole model

INSTALLATION

Produktspecifikationer

Varumärke:	Deante
Kategori:	Kran
Modell:	BGJN34M
Färg på produkten:	Zwart
Vikt:	758 g
Bredd:	120 mm
Djup:	73 mm
Höjd:	154 mm
Snäll:	Koeler
Ljudnivå (hög hastighet:	23.5 dB
Luftflöde:	92.6 m³/uur
Antal per paket:	1 stuk(s)
Antal fans:	1 ventilator(en)
Färg på belysningen:	Multi
Thermal Design Power (TDP):	180 W
Spännande:	7 - 13.2 V
Rotationshastighet (max):	1800 RPM
Rotationshastighet (min):	500 RPM
Belysning LED:	Ja
Lämplig plats:	Processor
Strömförbrukning (typiskt):	1.56 W
Grundläggande plåtmaterial:	Koper
Ventilator diameter:	120 mm
Spänningsklassificering:	12 V
Nominell nätspänning:	0.13 A
Antal fläktblad:	11
Processorsocklar som stöds:	LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4
Maximalt lufttryck:	2.19 mmH2O
Typ av lager:	Hydraulisch
Finmaterial:	Aluminium
Matventilator (bxdxh):	120 x 120 x 25 mm
Fläktkontakt:	3-pin + 4-pin