DeWalt DW088CG Bruksanvisning

DeWalt Laserpekare DW088CG

Läs nedan 📖 manual på svenska för DeWalt DW088CG (40 sidor) i kategorin Laserpekare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/40

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

Se você tiver dúvidas ou comentários, entre em contato conosco.

1-800-4-D WALTE

Instruction Manual

Guide D’utilisation

Manual de instrucciones

Manual de Instruções

DW088, DW088K, DW088CG

LaserChalkLine™ Laser Line Generator

Générateurs de faisceaux laser LaserChalkLineMC

Generador de línea láser LaserChalkLine™

Gerador de Linha Laser LaserChalkLine™

English 1

Français 9

Español 17

Português 27

ENGLISH

If you have any questions or comments about this or any D WALTE tool, call us toll free at: 1-800-4-D WALTE

(1-800-433-9258).

Safety Instructions for Lasers

WARNING! Read and understand all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WARNING! Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable

parts inside. Serious eye injury could result.

WARNING: Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

• Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power

tools create sparks which may ignite the dust or fumes.

• Use the laser only with the specifically designated batteries. Use of any other batteries may create a risk of fire.

• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the hands of untrained users.

• Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one

laser, may create a risk of injury when used on another laser.

• Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified

personnel may result in injury. To locate your nearest D WALTE service center call 1–800–4-D WALTE (1–800–433–9258) or go to http://

www.D WALTE.com on the Internet.

• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye injury could result.

• Do not place the laser in a position which may cause anyone to intentionally or unintentionally stare into the laser

beam. Serious eye injury could result.

• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laser beam.

• Do not disassemble the laser tool. There are no user serviceable parts inside.

• Do not modify the laser in any way. Modifying the tool may result in Hazardous Laser Radiation Exposure.

• Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result.

• Do not remove or deface warning labels. Removing labels increases the risk of exposure to radiation.

• Position the laser securely on a level surface. Damage to the laser or serious injury could result if the laser falls.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other

injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from

face and body.

• The label on your tool may include the following symbols.

V .................................volts

mW ............................milliwatts

...........laser warning symbol

nm wavelength in nanometers ..............................

II (2) Class II (2) Laser ...........................

Warning Labels

For your convenience and safety, the following labels are on your laser (refer to Fig. C).

CAUTION: LASER RADIATION - DO NOT STARE INTO THE LASER BEAM. CLASS II LASER PRODUCT.

CAUTION: CLASS 2 LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM.

Produktspecifikationer

Varumärke:	DeWalt
Kategori:	Laserpekare
Modell:	DW088CG
Vikt:	90.71 g
Bredd:	49.022 mm
Djup:	95.25 mm
Höjd:	17.78 mm
LED-indikatorer:	Stroom
Typ av förpackning:	Doos
USB uttag:	Ja
USB-kontakttyp:	USB Type-A
Medföljande kablar:	USB
Inspelningsupplösning:	1920 x 1080 Pixels
Ursprungsland:	China
Certifiering:	FCC, CE
Analog signalformat:	Niet ondersteund
USB-version:	3.2 Gen 1 (3.1 Gen 1)
Hållbarhetscertifikat:	RoHS
Stöder Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1
Typ av mat:	USB
siffra:	1
Förvaringstemperatur:	-10 - 70 °C
Internera:	Nee
Stöder Mac-operativsystem:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.9 Mavericks
Mac-kompatibilitet:	Ja
Stöder Linux:	Ja
Snabbinstallationsguide:	Ja
Värdgränssnitt:	USB 3.2 Gen 1 (3.1 Gen 1)
HDMI in:	1
Minsta systemkrav:	Intel Core i5-3400, NVIDIA GT630 / AMD R9 200, 4 GB RAM
Minimal processor:	Intel Core i5-3400
Minsta RAM:	4096 MB
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent