EdgeCraft E1520 Bruksanvisning

Läs nedan 📖 manual på svenska för EdgeCraft E1520 (48 sidor) i kategorin Knivslipare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/48
© 2021 The Legacy Companies
E L E C T R I C K N I F E S H A R P E N E R
E1520 Electric
R E A D T H E S E I N S T R U C T I O N S B E F O R E U S E .
I T I S E S S E N T I A L T H AT YO U F O L LOW T H E S E
I N S T R U C T I O N S TO AC H I E V E O P T I M U M R E S U LT S .
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the
Model E1520 in water or other liquid.
3. Make sure that only clean knife blades are inserted in
Model E1520.
4. Disconnect the appliance from its power source when not in use,
before cleaning, during service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You can return your sharpener to The Legacy
Company’s factory for service where the cost of repair or
electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced
by the EdgeCraf distributor or other qualied service to avoid
the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed
by the manufacturer because special tools are required. Please
consult your EdgeCraft® distributor.
7. CAUTION! This appliance may betted with a polarized power
plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug willt in a polarized outlet only one way.
If the plug does nott fully in the outlet, reverse the plug. If it still
does nott, contact a qualified electrician. Do not modify the
plug in anyway.
English — 2
8. The use of attachments not recommended or sold by The
Legacy Companies may causere, electric shock or injury.
9. The EdgeCraft® Model E1520 is designed to sharpen American,
European, and Asian style knives. Do not attempt to sharpen
scissors, ax blades or any blade that does not t freely in
the slots
10. Do not let the cord hang over edge of table or counter or touch
hot surfaces.
11. When in the “ONposition (Red flash on switch is exposed when
“ON”), the EdgeCraft® sharpener should always be on a stable
countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR
Model E1520 WILL BE SHARPER THAN YOU EXPECT. TO AVOID
INJURY, USE AND HANDLE THEM WITH EXTREME CARE. DO
NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND
OR BODY. DO NOT RUN FINGER ALONG EDGE. STORE IN A
SAFE MANNER.
13. Do not use outdoors.
14. Appliance is not intended to be used or cleaned by children or
persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge of the hazards involved.
15. Do not use honing oils, water or any other lubricant with the
Model E1520.
16. For household use only
17. This appliance is intended to be used in household and similar
applications such as: - sta kitchen areas in shops, oces, and
other working environments; - farm houses; - by clients in hotels,
motels, and other residential type environments; - bed and
breakfast type environments..
SAVE THESE INSTRUCTIONS.
English — 3

Produktspecifikationer

Varumärke: EdgeCraft
Kategori: Knivslipare
Modell: E1520

Behöver du hjälp?

Om du behöver hjälp med EdgeCraft E1520 ställ en fråga nedan och andra användare kommer att svara dig




Knivslipare EdgeCraft Manualer

Knivslipare Manualer

Nyaste Knivslipare Manualer