EdgeCraft E317 Bruksanvisning

Läs nedan 📖 manual på svenska för EdgeCraft E317 (36 sidor) i kategorin Knivslipare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/36
R E A D T H E S E I N S T R U C T I O N S B E F O R E U S E .
I T I S E S S E N T I A L T H AT YO U F O L LO W T H E S E
I N S T R U C T I O N S TO AC H I E V E O P T I M U M R E S U LT S .
© 2021 The Legacy Companies
E L E C T R I C K N I F E S H A R P E N E R
E317 Electric
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions.
2. To protect against electrical hazards do not immerse the
EdgeCraft® in water or other liquid.
3. Make sure that only clean knife blades are inserted in the
EdgeCraft®.
4. Unplug from outlet when not in use, before putting on or taking
o parts and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You may return your sharpener to The Legacy
Companies for service where the cost of repair or electrical or
mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the
EdgeCraft® distributor or other qualied service to avoid the
danger of electrical shock.
Outside the U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed
by the manufacturer because special tools are required. Please
consult your EdgeCraft® distributor.
English — 2
7. CAUTION!This appliance may betted with a polarized plug
(one blade is wider than the other). To reduce the risk of electric
shock, this plug will t in a polarized outlet only one way. If the
plug does nott fully in the outlet, reverse the plug. If it still
does nott, contact a qualified electrician. Do not modify the
plug in anyway.
8. The use of attachments not recommended or sold by The
Legacy Companies may cause re, electric shock, or injury.
9. The EdgeCraft® Model E317 is designed to sharpen kitchen
knives, pocket knives and most sports knives. Do not attempt to
sharpen scissors, ax blades or any blade that does not fit freely
in the slots.
10. Do not let the cord hang over edge of table or counter or touch
hot surfaces.
11. When in the “ON” position (Redash on switch is exposed when
on”) the EdgeCraf should always be on a stable countertop
or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR
EDGECRAFT® WILL BE SHARPER THAN YOU EXPECT. TO
AVOID INJURY, USE AND HANDLE THEM WITH EXTREME
CARE. DO NOT CUT TOWARD ANY PART OF YOUR FINGERS,
HAND OR BODY. DO NOT RUN FINGER ALONG EDGE. STORE
IN A SAFE MANNER.
13. Do not use outdoors.
14. Close supervision is necessary when any appliance is used by or
near children.
15. Do not use honing oils, water or any other lubricant with the
EdgeCraf.
16. For household use only.
17. This appliance is intended to be used in household and similar
applications such as: - stakitchen areas in shops, oces, and
other working environments; - farm houses; - by clients in hotels,
motels, and other residential type environments; - bed and
breakfast type environments.
SAVE THESE INSTRUCTIONS.
English — 3

Produktspecifikationer

Varumärke: EdgeCraft
Kategori: Knivslipare
Modell: E317

Behöver du hjälp?

Om du behöver hjälp med EdgeCraft E317 ställ en fråga nedan och andra användare kommer att svara dig




Knivslipare EdgeCraft Manualer

Knivslipare Manualer

Nyaste Knivslipare Manualer