Emga 516040 Bruksanvisning

Läs nedan 📖 manual på svenska för Emga 516040 (4 sidor) i kategorin Vakuumpackare. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
516040 en ma 2013 1
*516.040 VACUUMMACHINE - MANUAL
*516.040 VACUUMMACHINE - MANUAL
516040 en ma 2013 2

*516.040 VACUUMMACHINE - MANUAL
516040 en ma 2013 3
VACUM 13
Operating Instructions
Set welding timer (4) on No. 4. Insert the product inside the bag and then hold it
about 4 centimeters from the mouth, positioning it above and about one centimeter
overlapping the black seal. Stop when your fingers touch the edge of the machine.
Then proceed to seal, holding the bag with one hand and lowering the cover with the
other. Press down until the vacuum gauge pointer goes beyond No. 02. When there
is sufficient vacuum press the seal push-button (5) and then wait until the vacuum
pump automatically turns off.
Suggestion
The bag must be the right size for the product. Welding timer (4 ) must be adjusted
according to the thickness of the bag. A thicker bag requires a longer welding time
and vice-versa. Aspiration can be fast or slow depending on the ratios:
product/bag/bag thickness. With certain types of meat the machine may aspirate
blood. This will not enter the pump but stops inside the seal, which must be cleaned.
If liquid has been aspirated make another weld right after the first weld. If wrinkles
are formed along the weld repeat the weld procedure. Before welding the bag spread
it out with your hands to eliminate any air bubbles. Be careful when packaging meat
with bones since bones could puncture the bag.

Produktspecifikationer

Varumärke: Emga
Kategori: Vakuumpackare
Modell: 516040

Behöver du hjälp?

Om du behöver hjälp med Emga 516040 ställ en fråga nedan och andra användare kommer att svara dig




Vakuumpackare Emga Manualer

Emga

Emga 516040 Bruksanvisning

16 September 2024
Emga

Emga 516030 Bruksanvisning

16 September 2024

Vakuumpackare Manualer

Nyaste Vakuumpackare Manualer