Epcom TT-388DONGLE Bruksanvisning
Läs nedan 📖 manual på svenska för Epcom TT-388DONGLE (2 sidor) i kategorin Dongel. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
1. Support HDMI1.3, compatible with HDCP1.2.
2. Highest resolution up to 1080p full HD.
3. Strong anti-interference ability by running at 5GHz
operation frequency .
4. Support point to point wireless configuration.
5. Support IR passback with 20-60KHz frequency.
6. 50 meters long range transmission distance.
7. Plug and play, easy installation.
· Package Contents
· Important Safety Notice
· Introduction
· Features
· Installation Requirement
· Panel Description
· Connection
HDMI display
HDMI Extender TX
sender x1pcs
HDMI Extender RX
receiver x1pcs
DC5V/2A power
adapter x1pcs
IR blaster extension
cable x1pcs
IR receiver extension
cable x1pcs
User manual x1pcs
This HDMI wireless extender includes transmitter unit and receiver unit,
allows to transmit and extend HDMI signal up to 50 meters long away
wirelessly, it has strong anti-interference ability by running at 5GHz
operation frequency, and supports point to point connection. IR passback
with 20-60KHz frequency helps to remote control the source device
from the receiver side. It is really a very good solution for meeting,
conference, home entertainment and multi-media education etc.
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big
signal loss.
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
1. HDMI Extender TX sender
2. HDMI extender RX receiver
Connection instruction :
1) Connect HDMI input to HDMI source device and connect IR blaster
extension cable to IR OUT interface of the sender (TX).
2) Connect HDMI output to HDMI display device and connect IR
receiver extension cable to IR IN interface.
3) Power on the device (power led lights) and it works.
1) When the wireless signal transmits through wall, glass or other
obstacles, it will cause signal loss. Please install this device in
good environment with few obstacles.
2) The external environment wireless signal will affect transmission,
such as micro waver, wireless mouse and keyboard etc.
Note:
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repaire the device or open the enclosure without professional
person guidence to avoid electronic shock.
5. Make sure good ventilation openings to avoid product overheating
damage.
6. Shut off power and make sure environment is safe before installation.
7. Do not plug-in/out the network cables and IR cables when it is in using
to avoid cables damage.
8. Use DC5V/2A only. Make sure the specification matched if using 3rd party
DC adapters.
IR blaster extension
cable interface
Connect with IR blaster extension cable. Please
put the IR blaster close to source device to best
transmit the IR signal from receiver
Connect with HDMI source device
HDMI input
Connections
indicator
,LED indicator keep on when HDMI signal input
blink when data is transmitted
Connect with USB power cable
Power input
Power indicator LED indicator turn on when power on
Wireless connections
indicator
It s on when the transmitter and the receiver ’
connect well with each other, otherwise, it s off’
Connect with DC5V/2A power adapterPower input
USB Cable
x1pcs
【 】NOTE This device can be powered from the HDMI source device (which
with USB port) directly. However, when the transmission/connection is not
stable, or the output is not fluent, please connect a 5V plug (with USB port)
to the USB cable for power supply.
Connect with HDMI display deviceHDMI output
Data transmission
indicator
Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected
and transmitting data
Receive wireless signalAntenna
IR receiver extension
cable interface
Connect with IR receiver extension cable. Please
make sure the remote control is within the required
range of IR receiver
HDMI Wireless Extender
· Specification
· FAQ
Q: Transmitter and receiver can t be connected with each other?'
A: 1)Please check if the wireless connection light on product blinks
properly.
2) Re start the transmitter or receiver.
3) Re connect the HDMI c able.
Q: The wifi LED indicator of the transmitter is off, but no s ignal o utput
on display/monitor?
A: 1) please check if there is an HDMI signa l input of sender TX
2) Try to connect the sig nal source directly to display device to see if
there is signal output from sourc e device or c hange the signa l
sourc e, HDMI cables and try again.
Q: Display not fluent and stable
A: 1) Please move the position of sender (TX) and rec eiver (RX) and make
sure th e devic e is within the signal coverage.
2) Re start the transmitter or receiver.
3) Re connect the HDMI c able.
4) Re move other wireless signal disturbance and red uc e the
obstacle on the way.
Disclaimer
The product name and brand name may be registered trademark of
related manufa cturers. TM and ® ma y be omitted on the user manua l.
The pictures on the user manual are jus t for reference, and there may be
some s ligh t difference with t he real products .
We reserve t he rights to make changes wit hout further notice to a
product or sys tem described herein to improve reliability, function or
design.
HDMI
performanc e
and interface
A edudio forma ts Sup por t L R stereo audio/
Maximum transfe r rate 10.2Gbps
Input and output DDC signal 5Vp-p(TTL)
Input and output TMDS signal 0. ～1.5Vp-p(T MDS)7
Input cable length supported ≤5m(AWG2 6 HDMI 1.3c able stand ard)
Output cable length supported ≤5m(AWG2 6 HDMI 1.3c able stand ard)
Transmi ssio n method 5G Wireless transmi ssio n
Electrostatic protection
of the whole machine
1a Contact discharge level 3
Latency ≤200 ms
Wireless
performanc e
and interface
Transmi ssio n dist ance 50 Meters
Protection
level
Work ing temp erat ure 0 4～ 0℃
Storage tempera ture - 0～70℃2
Humidity (n o cond ensation ) 0～90%
Material RX: Iron alloy ma terial + c rystal pan el
TX Plastic:
Operating
Environment
Dimension
Finishin g Grit blast
Color Black
Weig ht TX： g， RX： g 30 220
Body
properties
TX: 88.90(W) x 3 8.99 (D) x15.17 (H)mm
RX: 131.65(W) x 95(D ) x 19.9 0(H)mm
1b Air discharge level 3
Standard: IEC61000-4-2
Mean time between failures
(MTBF) >30000 Hour sRelia bili ty
Power
Supply
Voltage/Current
Power consumption
TX DC5V 1 A RX 5V/2 A: / :DC
HDMI
Performance
A Ind nterface
HDCP1.2
HDMI resolution sup por te d
480i@60Hz 480p@60Hz、 、
576i@50Hz 576p@50Hz、 、
720p@50/60Hz 1080i@50/60Hz、 、
1080p@50/60Hz
HDMI compli ance HDMI1.3
HDCP compliance
T 3 R 5 WX＜ W X＜
IR
performanc e
and interface
Support IR pas sback with
20-60KHz frequency
IR remote control
Produktspecifikationer
| Varumärke: | Epcom |
| Kategori: | Dongel |
| Modell: | TT-388DONGLE |
Behöver du hjälp?
Om du behöver hjälp med Epcom TT-388DONGLE ställ en fråga nedan och andra användare kommer att svara dig
Dongel Epcom Manualer
17 September 2024
Dongel Manualer
- Dongel Huawei
- Dongel Yealink
- Dongel Nedis
- Dongel Asus
- Dongel GoGEN
- Dongel Billow
- Dongel Logilink
- Dongel EVOLVEO
- Dongel CGV
Nyaste Dongel Manualer
3 Oktober 2024
22 September 2024
19 September 2024
18 September 2024
18 September 2024
18 September 2024
16 September 2024
16 September 2024
16 September 2024
14 September 2024