EtiamPro EDS150 Bruksanvisning

Läs nedan 📖 manual på svenska för EtiamPro EDS150 (26 sidor) i kategorin Intercomsystem. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/26
V. 01 – 1 08/03/2024 ©Velleman Group nv
EDS150
ENGLISH
NEDERLANDS
FRANÇAIS
USER MANUAL 3
GEBRUIKERSHANDLEIDING 10
MODE D’EMPLOI 17
EDS150
V. 01 – 2 08/03/2024 ©Velleman nv
Product overview
EDS150
V. 01 – 3 08/03/2024 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
3. General Description
Product overview
1 Screen
2 Microphone
3 Network Interface including power supply via Power Over Ethernet (POE)
4 RS- 485 (Reserved) & Alarm Output Terminal
5 Alarm Input Terminal
6 TF Card Slot
7 Debugging Port
8 Loudspeaker
9 Power Supply Terminal (only use if no POE connection is available)
4. Operation
4.1 Mounting
The wall mounting plate and junction box are required to install the indoor station onto the wall. There
are two sizes of junction boxes adapted to the device.
Size 1: 75 mm (width) × 75 mm (length) × 50 mm (depth).
Size 2: 55 mm (width) × 101 mm (length) × 38.5 mm (depth).
The dimension of mounting plate is 97 mm (width) × 104 mm (length) × 3 mm (depth).
See schematic page 2
Before you start
1. Make sure the device in the package is in good condition and all the assembly parts are included.
2. The indoor station supports Power Over Ethernet (PoE) (recommended) or 12 VDC power supply.
Please make sure your power supply matches your indoor station.
3. Make sure all related equipment - are power off during the installation.
4. Check the product specification for the installation environment.
4.2 Configuration
Startup the device:
Connect the network cable to a POE switch or injector and in turn connect it to the Internet router.
After a few minutes, the will be automatically connected to the Internet.indoor touchscreen station
1. Create a password and confirm it. Tap OK.

Produktspecifikationer

Varumärke: EtiamPro
Kategori: Intercomsystem
Modell: EDS150

Behöver du hjälp?

Om du behöver hjälp med EtiamPro EDS150 ställ en fråga nedan och andra användare kommer att svara dig




Intercomsystem EtiamPro Manualer

Intercomsystem Manualer

Nyaste Intercomsystem Manualer