Flir First Mate II HM 324XP+ Bruksanvisning

Flir Kamera First Mate II HM 324XP+

Läs nedan 📖 manual på svenska för Flir First Mate II HM 324XP+ (2 sidor) i kategorin Kamera. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

432-0004-31-1 2 Rev 100 Jan 2013

HM-Series Quick Start Guide

Power Button – The HM-Series camera has 3 power modes: On, Off, and

Standby.

• On - Takes approximately 90 seconds (during bootup there is a

fast-flashing red LED on the eyepiece display).

• Standby - After the camera is on, pressing the Power button will

toggle the camera between On and Standby mode. (In Standby

there is a slow-flashing red LED on the eyepiece display).

• Off - Push and hold the power button for 8 sec. to turn off.

Capture Button – Some models only; take snapshots (press and

release) or video clips (press and hold) to the SD memory card.

Display Brightness – Toggle through five brightness settings.

White/Black Hot/Instalert – In White Hot mode, hotter items appear as white

or light grey. In Black Hot, hotter items appear as black or dark grey. In Instalert,

hotter items in a scene are highlighted in red.

2× Zoom –Some models only; causes the image to zoom to 2X.

Diopter Control – Adjust the diopter setting for the sharpest image in

the viewfinder.

PowerCapture2x zoom

Display

Adjustable

Diopter

Eyepiece

Lens Cap

Brightness

White hot/

Black hot/

Marine Red

432-0004-31-1 2 Rev 100 Jan 2013

HM-Series Quick Start Guide

Installing the Batteries and SD Card

The batteries must be installed and charged before using your camera.

Install your SD card.

1. Remove the small SD card door.

No tools are required.

2. Install the SD card.

3. Loosen the four captive screws securing the

battery cover.

4. Remove the battery cover by grasping the front

edge where the SD card door was removed.

5. Install the batteries as shown.

6. Snap the SD card door back into place and re-

install the battery cover—it only fits one way.

Charging the Camera

The batteries in the camera must be charged prior to their first use.

1. Connect the Hot Shoe to your camera.

2. Ensure that the plug is fully seated in the Hot

Shoe.

When charging correctly, the charging indicator

will be lit yellow and will blink green for one second

within about 35 seconds.

The charging indicator will continue to blink at

decreasing intervals until the batteries are fully

charged.

When fully charged, the charging indicator will be

lit solid green. The initial charge time is

approximately 4 hours.

www.flir.com

Grasp SD card

Battery

cover

door edges

and pull

–

Plug from power adapter

Charging

indicator

Solid

green

Produktspecifikationer

Varumärke:	Flir
Kategori:	Kamera
Modell:	First Mate II HM 324XP+
Färg på produkten:	Roestvrijstaal
Bredd:	590 mm
Djup:	456 mm
Typ av handfat:	Opbouwwasbak
Forma handfat:	Rechthoekig
Diskbänksmaterial:	Roestvrijstaal
Antal handfat:	2 kommen
Form första diskbänken:	Rechthoekig
Första skålens mått (BxL):	165 x 300 mm
Först kommer djupet:	120 mm
Forma andra handfat:	Rechthoekig
Andra skålens mått (BxL):	340 x 400 mm
För det andra kommer djupet:	180 mm
Kraangat:	Nee
Disken:	Nee
Kran ingår:	Nee