Flycam FLCM-FLN-PLA Bruksanvisning
Läs nedan 📖 manual på svenska för Flycam FLCM-FLN-PLA (5 sidor) i kategorin Stativ. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/5
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Placid 2 Axis Stabilizing Arm -(FLCM FLN PLA) - -
A s s e m b l y M a n u a l
Tensioner Spring
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Safety Shock Cord
2
Remove the hook from Flowline support
bar.
Take the cord bundle out from the cup and
pull the whole cord unl a cord lock comes
out.
SetupFlowline Placid
Separate the cord from cord lock and keep
the lock aside for aaching it back
aerwards.
Separate the cord also from the cup and
keep aside for mounng it back later.
Use a tool to unscrew small bolts that hold
the front pulley, from each side.
3
Mount front pulley in between the cord,
and pull the cord so that it goes back inside
the support arm. Again use tools to ghten
the bolts from each side and set the pulley
at its posion.
Turn the Placid Arm upside down. By using
an allen key, loosen the mounng bracket of
Arm. Now the bracket has enough space for
the cord to pass through it.
Insert cord into the mounng bracket. Make
sure that it is going exactly in the centre, up
into the hole of the Placid arm. Then Pull
the cord from boom of Placid arm, near
the spring, while sll holding it upside
down.
To x Placid arm at its appropriate posion,
aach one side of Safety Elasc Cord to a
knob on Placid arm. Then, drag the other
side of elasc cord across Flowline support
arm, and aach to the knob on other side
of Placid arm.
Now you can hold the Placid arm in its
standard posion. The cord is aptly set to
perform its funcon. By using an allen key,
ghten the mounng bracket of Placid Arm
with Flowline support arm.
Pull out the front pulley carefully, so it
doesn t drop into the Flowline support bar ’
and Insert the cord from the boom hole
and tug it out from the top hole.
Produktspecifikationer
| Varumärke: | Flycam |
| Kategori: | Stativ |
| Modell: | FLCM-FLN-PLA |
Behöver du hjälp?
Om du behöver hjälp med Flycam FLCM-FLN-PLA ställ en fråga nedan och andra användare kommer att svara dig
Stativ Flycam Manualer
23 September 2024
23 September 2024
23 September 2024
23 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
Stativ Manualer
- Stativ Sony
- Stativ Silvercrest
- Stativ Livoo
- Stativ Kodak
- Stativ Trust
- Stativ Carson
- Stativ Easypix
- Stativ Hama
- Stativ AVerMedia
- Stativ Celestron
- Stativ DJI
- Stativ Vello
- Stativ Rollei
- Stativ Magnus
- Stativ Barska
- Stativ Zhiyun
- Stativ Miller
- Stativ Benro
- Stativ GVM
- Stativ Vortex
- Stativ Sachtler
- Stativ Sevenoak
- Stativ Laserliner
- Stativ Sunpak
- Stativ Celly
- Stativ Eurolite
- Stativ Gitzo
- Stativ Proaim
- Stativ Revo
- Stativ Konig & Meyer
- Stativ Manfrotto
- Stativ Velbon
- Stativ ARRI
- Stativ Levenhuk
- Stativ JOBY
- Stativ Oben
- Stativ Dorr
- Stativ Glide Gear
- Stativ Winegard
- Stativ Libec
- Stativ Kogan
- Stativ Gravity
- Stativ Sirui
- Stativ Vinten
- Stativ Neewer
- Stativ Ravelli
- Stativ Fidlock
- Stativ Olloclip
- Stativ Vanguard
- Stativ IFootage
- Stativ SmallRig
- Stativ FeiYu-Tech
- Stativ FeiyuTech
- Stativ Sky-Watcher
- Stativ Hohem
- Stativ MOVE'N SEE
- Stativ On Air
- Stativ Kaiser Fototechnik
- Stativ Slidekamera
- Stativ IOptron
- Stativ FLOWCINE
- Stativ SteadiCam
- Stativ Fat Gecko
- Stativ 3 Legged Thing
- Stativ FLM
- Stativ Peak Design
- Stativ Easyrig
- Stativ Robus
- Stativ Studio Assets
- Stativ Square Jellyfish
- Stativ Stalco
- Stativ Tiltall
- Stativ E-Image
Nyaste Stativ Manualer
26 Oktober 2024
26 Oktober 2024
17 Oktober 2024
8 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
1 Oktober 2024
26 September 2024
26 September 2024