Flycam Flowline Edge V1 Bruksanvisning
Läs nedan 📖 manual på svenska för Flycam Flowline Edge V1 (6 sidor) i kategorin Stativ. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/6
1
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Flowline Edge V1 Stabilizaon Arm
Flowline Edge V1 Stabilizaon Arm for Flowline Rigs,
Cameras & Gimbals (FLCM- -EDGE V1)
2 x Screws
(Size: 4 x 12)
Height Riser
2mm Allen Key
2 x Screws CSK
(Size: 3 x 8)
2
• Similarly, remove the second screw.
• Now, remove the Hook from the Flowline
Support Arm (Not Included).
• As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
• Separate the Cord and the Cord lock.
• Keep the lock aside to re aach it later.-
• To detach the Flowline Support Rod
(Not Included), pull it upwards.
Flowline Edge Setup
• Loosen the screw of the Camera Hook
aached to the Flowline Support Arm
(Not Included) using the Allen key.
• Similarly, separate the Cord from the Cup to
mount it back later.
NOTE: It is recommended to aach the minimum required (weight 3kg / 6lb) for pulling down the
balancing rope to ensure proper operaon of your Flycam Flowline system.
3
• To detach the extension from the Support
Rod of the Vest, remove its screw using a
screwdriver.
• Detach the extension from the Support Rod
(Not Included) and align the cord with the
height riser, as shown in the image.
• Aach the extension with the height riser
and push it inside.
• Similarly, ghten the top screw using the
screwdriver.
• Loosen the knob of the Flowline Edge.
• Dissemble the Camera Hook and the
Support Rod from the Vest.
• Insert a screw in the Support rod and
ghten it using the screwdriver.
Produktspecifikationer
| Varumärke: | Flycam |
| Kategori: | Stativ |
| Modell: | Flowline Edge V1 |
Behöver du hjälp?
Om du behöver hjälp med Flycam Flowline Edge V1 ställ en fråga nedan och andra användare kommer att svara dig
Stativ Flycam Manualer
23 September 2024
23 September 2024
23 September 2024
23 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
Stativ Manualer
- Stativ Sony
- Stativ Silvercrest
- Stativ Livoo
- Stativ Kodak
- Stativ Trust
- Stativ Carson
- Stativ Easypix
- Stativ Hama
- Stativ AVerMedia
- Stativ Celestron
- Stativ DJI
- Stativ Vello
- Stativ Rollei
- Stativ Magnus
- Stativ Barska
- Stativ Zhiyun
- Stativ Miller
- Stativ Benro
- Stativ GVM
- Stativ Vortex
- Stativ Sachtler
- Stativ Sevenoak
- Stativ Laserliner
- Stativ Sunpak
- Stativ Celly
- Stativ Eurolite
- Stativ Gitzo
- Stativ Proaim
- Stativ Revo
- Stativ Konig & Meyer
- Stativ Manfrotto
- Stativ Velbon
- Stativ ARRI
- Stativ Levenhuk
- Stativ JOBY
- Stativ Oben
- Stativ Dorr
- Stativ Glide Gear
- Stativ Winegard
- Stativ Libec
- Stativ Kogan
- Stativ Gravity
- Stativ Sirui
- Stativ Vinten
- Stativ Neewer
- Stativ Ravelli
- Stativ Fidlock
- Stativ Olloclip
- Stativ Cullmann
- Stativ Vanguard
- Stativ IFootage
- Stativ SmallRig
- Stativ FeiYu-Tech
- Stativ FeiyuTech
- Stativ Sky-Watcher
- Stativ Hohem
- Stativ MOVE'N SEE
- Stativ On Air
- Stativ Kaiser Fototechnik
- Stativ Slidekamera
- Stativ IOptron
- Stativ FLOWCINE
- Stativ SteadiCam
- Stativ Fat Gecko
- Stativ 3 Legged Thing
- Stativ FLM
- Stativ Peak Design
- Stativ Easyrig
- Stativ Robus
- Stativ Studio Assets
- Stativ Square Jellyfish
- Stativ Stalco
- Stativ Tiltall
- Stativ E-Image
Nyaste Stativ Manualer
26 Oktober 2024
26 Oktober 2024
17 Oktober 2024
8 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
1 Oktober 2024
26 September 2024
26 September 2024