Gossen Metrawatt METRAPhase 1 Bruksanvisning

Läs nedan 📖 manual på svenska för Gossen Metrawatt METRAPhase 1 (16 sidor) i kategorin Mätutrustning. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Operating Instructions
METRAPHASE 1
Phase Sequence Indicator 3-348-991-15
13/9.20
2 Gossen Metrawatt GmbH
(1) Connector sockets for phases L1 ... L3
(2) Rotary LEDs for displaying frequency and phase
sequence
(3) Phase sequence and frequency
Green arrow: Clockwise rotation,
LEDs light up green and rotate clockwise
Momentary frequency:
Indicated by LED which briefly lights up red
Dashed red arrow: Counterclockwise rotation,
LEDs light up red and rotate counterclockwise
Momentary frequency:
Indicated by LED which briefly lights up green
(4) Phase LEDs, indicate voltage at L1 ... L3
(5) Voltage value LEDs, indicate line-to-line voltage value
1
4
2
3
5
208V
120/ 400V
230/ 690V
400/
L3
L3
L2
L2
L1
L1
600 V CAT IV
Gossen Metrawatt GmbH 3
GB
Meanings of Symbols on the Device
Warning concerning a point of danger
(attention: observe documentation)
Ground
Continuous, doubled or reinforced
insulation
CAT IV Maximum allowable voltage between the
connector sockets (1) and ground it is
600 V category IV.
EU conformity marking
This device may not be disposed of with house-
hold trash. Further information regarding the
WEEE mark can be accessed on the Internet at
www.gossenmetrawatt.com by entering the
search term “WEEE”.
!

Produktspecifikationer

Varumärke: Gossen Metrawatt
Kategori: Mätutrustning
Modell: METRAPhase 1

Behöver du hjälp?

Om du behöver hjälp med Gossen Metrawatt METRAPhase 1 ställ en fråga nedan och andra användare kommer att svara dig




Mätutrustning Gossen Metrawatt Manualer

Mätutrustning Manualer

Nyaste Mätutrustning Manualer