Gossen Metrawatt POINTAX 6000M Bruksanvisning
Gossen Metrawatt
Mätutrustning
POINTAX 6000M
Läs nedan 📖 manual på svenska för Gossen Metrawatt POINTAX 6000M (16 sidor) i kategorin Mätutrustning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
Operating Instructions
POINTAX 6000M
Point Recorder 3-348-819-03
2/8.18
Contents
Page
Application and brief description
The POINTAX 6000M is a microprocessor-controlled point
recorder. It is supplied in two different versions:
– scale version with 1 to 6 scale divisions,
– display version (no more available)
The recorder is connected to transducers and/or directly to ther-
mocouples or resistance thermometers. The measuring channels
are electrically isolated and earth-free. The recorder is matched to
the measuring task via the software by means of
– keys of the display and operating panel
– PC and parameterizing program PARATOOL P6000M
via the RS 485 interface.
Standard temperature sensor curves are stored in the firmware of
the recorder and linearized with high accuracy. Supplementary
functions like text print, balancing function and event marker
increase the information content of the print-out process quantity.
Alarm signalling and remote control make the recorder a device to
be used in a wide range of applications. The standby function
makes triggered recording operation possible.
Reference symbols in the text
<Key> Designation of the keys in the display and control
panel
{ }Display Non-flashing presentation on the display
{ }Display Flashing presentation on the display
The information "right", "left" or "top", "bottom" – unless other-
wise stated – is on the understanding that the viewer looks at the
front.
Supplementary documents
Parameterizing instructions POINTAX 6000M (Scale version)
Interface description POINTAX 6000M
(can be downloaded from our website)
Important information for your safety!
It must absolutely be read and followed!
A condition of correct and safe operation of the point
recorder POINTAX 6000M is that it is transported and stored
in a suitable manner, competently installed and started as
well as operated correctly and serviced carefully.
Only those persons must work on the recorder who are famil-
iar with installation, startup, operation and servicing of com-
parable equipment and who have the qualification required
for their work.
The contents of these operating instructions and the safety
notes affixed to the unit are to be observed.
The regulations, standards and directives mentioned in these
operating instructions are for the Federal Republic of Ger-
many. When using the recorder in other countries, relevant
national rules must be followed.
The recorder is constructed and tested in accordance with
DIN EN 61010-1 "Safety requirements for electronic measur-
ing, open-loop control, closed-loop control and laboratory
instruments“, it left the factory in safe and proper condition.
To maintain this condition and to ensure safe operation, the
safety notes in these operating instructions with the heading
"Caution" must be followed. Otherwise, persons could be
endangered and the unit itself as well as other equipment and
facilities could be damaged.
If the information contained in these operating instructions
should not be sufficient in certain cases, our product support
(see page 15) will be glad to provide further information.
2 GMC-I Messtechnik GmbH
1 Installation and startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Mounting site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.5 Placing the recording chart . . . . . . . . . . . . . . . . . . . . . . 5
1.6 Placing the color head . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.7 Switching the recorder on . . . . . . . . . . . . . . . . . . . . . . . 6
1.8 Positioning the recording chart . . . . . . . . . . . . . . . . . . . 6
2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Removing the recording chart . . . . . . . . . . . . . . . . . . . . 7
2.2 Removing the recording chart from the
take-up reel . . . . . . . . . . . . . . . . . . . . . . . (see Figure 12) 7
2.3 Changing the chart speed . . . . . . . . . . . . . . . . . . . . . . . 7
2.4 Standby function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5 Measured value display . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Balancing function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7 End-of-chart signalling . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 Parameterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Reconfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1 Firmware update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 Replacing scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3 Replacing the label for measuring points
(see Figure 16 and Figure 17). . . . . . . . . . . . . . . . . . . . . 10
4.4 Replacing the case doors . . . . . . . . . . . . . . . . . . . . . . 10
5 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 Fuse replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7 Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8 Returns and Environmentally Sound Disposal . . . . . . . . . . . 15
9 Repair and Replacement Parts Service
Calibration Center* and
Rental Instrument Service. . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
GMC-I Messtechnik GmbH 3
1 Installation and startup
1.1 Scope of delivery (see Figure 1)
The point recorder comes with:
– operating instructions
– 2 fasteners Be
– 1 color head Fk
– 1 package fanfold chart Fp or 1 chart roll Sr
– Depending on the order, the respective number of screw-plug
terminals Sk, one zener diode combination per measuring sys-
tem, 9-pole sub D plug and reading rulers.
Figure 1 Scope of delivery of the POINTAX 6000M
1.2 Mounting site
Figure 2 Dimensional drawing POINTAX 6000M (dimensions in mm)
Position of use Inclin. to the side –30° °... 0 ... +30
Inclination to the rear 20°
Inclination to the front 20°
Ambient temperature 0 ... 50 °C
Relative humidity ≤ 75 % annual average, max. 85 %,
prevent dewing!
1.3 Installation (see Figure 2 and Figure 3)
Installation in switchboards
1. Insert the recorder from the front into the switchboard.
2. Push the fasteners Be in the guiding grooves at the side of the
case (see Figure 3).
Note
The fasteners Be are suitable for side-by-side mounting in hori-
zontal or vertical direction.
3. After aligning, equally tighten the fasteners.
Installation in grid frames
1. Fasten 4 centering angle brackets (Ordering number A416A)
on the grid frame.
2. Push the fasteners Be in the guiding grooves at the side of the
case (see Figure 3).
3. After aligning, equally tighten the fasteners.
Figure 3 Inserting the fasteners
Be Fastener
Fk Color head
Fp Fanfold chart
Sk Screw-plug terminals
Sr Chart roll
294 14.5144
138+1.0
0
100°
Panel cutout
Produktspecifikationer
| Varumärke: | Gossen Metrawatt |
| Kategori: | Mätutrustning |
| Modell: | POINTAX 6000M |
Behöver du hjälp?
Om du behöver hjälp med Gossen Metrawatt POINTAX 6000M ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Gossen Metrawatt Manualer
26 September 2024
25 September 2024
24 September 2024
23 September 2024
22 September 2024
22 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Mätutrustning Manualer
- Mätutrustning Bosch
- Mätutrustning Panasonic
- Mätutrustning DeWalt
- Mätutrustning Fysic
- Mätutrustning Honeywell
- Mätutrustning Pioneer
- Mätutrustning Albrecht
- Mätutrustning Alecto
- Mätutrustning Amprobe
- Mätutrustning Yato
- Mätutrustning Lanaform
- Mätutrustning Megasat
- Mätutrustning Meec Tools
- Mätutrustning Milwaukee
- Mätutrustning Extech
- Mätutrustning Victron Energy
- Mätutrustning Hazet
- Mätutrustning Metrix
- Mätutrustning Benning
- Mätutrustning Einhell
- Mätutrustning Voltcraft
- Mätutrustning Midland
- Mätutrustning Mitsubishi
- Mätutrustning Velleman
- Mätutrustning Vemer
- Mätutrustning Perel
- Mätutrustning Kyoritsu
- Mätutrustning IFM
- Mätutrustning Ideal
- Mätutrustning Flir
- Mätutrustning Grohe
- Mätutrustning Technoline
- Mätutrustning Soler And Palau
- Mätutrustning Continental Edison
- Mätutrustning Rossmax
- Mätutrustning Carrier
- Mätutrustning Testboy
- Mätutrustning Goclever
- Mätutrustning Trotec
- Mätutrustning LaCie
- Mätutrustning Danfoss
- Mätutrustning Hager
- Mätutrustning Bresser
- Mätutrustning TFA
- Mätutrustning Owon
- Mätutrustning Flex
- Mätutrustning Fluke
- Mätutrustning Fantini Cosmi
- Mätutrustning Eltako
- Mätutrustning EBERLE
- Mätutrustning Basetech
- Mätutrustning Stabila
- Mätutrustning Be Cool
- Mätutrustning Laserliner
- Mätutrustning Wentronic
- Mätutrustning REV
- Mätutrustning Testo
- Mätutrustning Clean Air Optima
- Mätutrustning Eastron
- Mätutrustning ORNO
- Mätutrustning RIDGID
- Mätutrustning Westfalia
- Mätutrustning Monacor
- Mätutrustning Multimetrix
- Mätutrustning GW Instek
- Mätutrustning Logilink
- Mätutrustning SIIG
- Mätutrustning Oregon Scientific
- Mätutrustning Etymotic
- Mätutrustning Reely
- Mätutrustning Muller
- Mätutrustning TFA Dostmann
- Mätutrustning Werma
- Mätutrustning Greisinger
- Mätutrustning Beha-Amprobe
- Mätutrustning Kopp
- Mätutrustning Kern
- Mätutrustning Kogan
- Mätutrustning Kreg
- Mätutrustning Pancontrol
- Mätutrustning Peak
- Mätutrustning Uni-T
- Mätutrustning H-Tronic
- Mätutrustning Elgato
- Mätutrustning Hikmicro
- Mätutrustning PeakTech
- Mätutrustning Sonel
- Mätutrustning Tru Components
- Mätutrustning Emko
- Mätutrustning Aktobis
- Mätutrustning Entes
- Mätutrustning KS Tools
- Mätutrustning Lund
- Mätutrustning Trumeter
- Mätutrustning Delta Ohm
- Mätutrustning Hanna
- Mätutrustning MGL Avionics
- Mätutrustning Adwa
- Mätutrustning Chauvin Arnoux
- Mätutrustning Megger
- Mätutrustning AREXX
- Mätutrustning PCE Instruments
- Mätutrustning CEM
- Mätutrustning SHX
- Mätutrustning Hameg
- Mätutrustning TDE Instruments
- Mätutrustning Joy-it
- Mätutrustning Circutor
- Mätutrustning Wachendorff
- Mätutrustning Klein Tools
- Mätutrustning Duro Pro
- Mätutrustning GMW
- Mätutrustning Janitza
- Mätutrustning Sanwa
- Mätutrustning J.P. Instruments
- Mätutrustning MSW
- Mätutrustning Weidmüller
- Mätutrustning Qubino
- Mätutrustning Lascar Electronics
- Mätutrustning HT Instruments
- Mätutrustning P3 International
- Mätutrustning Beckmann & Egle
- Mätutrustning Seek Thermal
- Mätutrustning INFICON
- Mätutrustning Motrona
- Mätutrustning Tempo
- Mätutrustning Camille Bauer
- Mätutrustning Blebox
- Mätutrustning Seaward
- Mätutrustning HOZO Design
- Mätutrustning Corentium
- Mätutrustning GQ
- Mätutrustning Tektronix
- Mätutrustning Dostmann Electronic
- Mätutrustning Murideo
- Mätutrustning SecuTech
- Mätutrustning NetPeppers
- Mätutrustning SensoProtect
- Mätutrustning Water-i.d.
- Mätutrustning ZKETECH
- Mätutrustning LabNation
- Mätutrustning Electronics International
- Mätutrustning Cliff
- Mätutrustning ClimeMET
- Mätutrustning Fixpoint
- Mätutrustning Kübler
- Mätutrustning AkYtec
- Mätutrustning Stahlwille
- Mätutrustning MASIMO
- Mätutrustning Milesight
- Mätutrustning Enda
- Mätutrustning CSL
- Mätutrustning Ermenrich
- Mätutrustning PICO
- Mätutrustning Siglent
- Mätutrustning Noyafa
- Mätutrustning Stamos
Nyaste Mätutrustning Manualer
26 Oktober 2024
25 Oktober 2024
25 Oktober 2024
24 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024