GPX PJSI900 Bruksanvisning

Läs nedan 📖 manual på svenska för GPX PJSI900 (4 sidor) i kategorin Projektionsduk. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
Indoor Projector Screen
Users Guide for Model PJSI900 v2349-01
For the most up-to-date version of this Users Guide, go to www.gpx.com
2
Overview
Tripod Legs
Screen Back
Screen Hanger
Hanger Hook
Carry Handle & Lock
Stowed Position
Extension Lock
Positioning the Screen
It is advised that you position the screen in an areas free
from direct light. Too much excess light will blur the
image from the projector.
Only place the screen on a level surface. If mounting to a
wall, it is advised to mark out the area before installation
(mounting hardware not included).
Do not fold or bend the screen.
Clean with a dry towel. Do not use chemical agents or
solvents, as they may damage the screen material.
Features
90" diagonal screen
Wide scree 16:9 aspect ratio
PVC screen material
Steel tube frame
Includes
Screen & Frame
3
NOTE: Disassembly is the reverse of setup.
Setup & Disassembly
2
Raise
Unlock
3
4Attach
Hanger
Lock
6
Lock
Raise
Place the screen in an upright position on the
ground and fully extend the legs by pushing
downward on the tripod joint.
Rotate the screen housing 90°. Disengage the lock on the carry handle and lower
the screen housing to the desired height, then
re-engage the lock.
First, unlock the vertical extension shaft and raise
it upwards so that it clears the catch at the end of
the screen housing.
Extend the screen upwards and attach the hanger
to the hook on the top of the shaft.
You can further adjust the height by adjusting the
vertical extension shaft. Be sure to engage the lock
once the desired height is reached.
1
3
5
2
4
6

Produktspecifikationer

Varumärke: GPX
Kategori: Projektionsduk
Modell: PJSI900

Behöver du hjälp?

Om du behöver hjälp med GPX PJSI900 ställ en fråga nedan och andra användare kommer att svara dig