Hager JK20210BSD Bruksanvisning

Hager Växla JK20210BSD

Läs nedan 📖 manual på svenska för Hager JK20210BSD (3 sidor) i kategorin Växla. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Pozidrive PZ2 2.5mm

All product(s) must be installed by a suitably competent electrician

giving consideration to their intended use and in accordance with the

current edition of BS 7671 (IET Wiring Regulations).

The Electricity at Work regulations and the Health and Safety at Work

Act shall be complied with.

Only equipment and arrangements specied in Hager’s technical

documentation / catalogue shall be used

Install in the vertical plane only.

Notice:

To prevent potential overheating from loose connections the installer

shall check connections are tightened to the torque levels stated in

these instructions prior to energising this board. This check should

include factory made connections which may have loosened in transit.

Please note, drawings in this document show a typical Invicta 3 board,

but installation method is the same.

JK2***B/BG

JK2***BSD/BGSD

User instructions

Notice d’instructions

Bedienungsanleitung

Instrucciones de uso

Instruções

Bruksanvisning

Gebruiksaanwijzing

Pozidrive PZ2

2.5

Designation H W D Weight (kg)

JK20210B/BG 1250 465 165.5 16.5

JK20216B/BG 1400 465 165.5 18.7

JK20220B/BG 1400 465 165.5 20.3

JK20210BSD/BGSD 1250 465 165.5 19

JK20216BSD/BGSD 1400 465 165.5 21.2

JK20220BSD/BGSD 1400 465 165.5 22.8

Warranty

This distribution board is offered with a 24 month warranty against

defective material or manufacture. If a warranty claim is necessary,

please call the technical support number given at the bottom of the page

and we will be pleased to help.

Interface Characteristics

Rated & operational voltage (U

n / Ue)

415V a.c. 50Hz

Rated insulation voltage (U

690V a.c. 50Hz

Rated impulse withstand voltage (U

imp)

4kV

Rated current of the Assembly (I

nA)

JK202B(G) 200A

JK2xxx 250A1

or rating of incoming circuit / incomer kit whichever is lower

Rated current of an Outgoing circuit (I

nC)

MCB 0.5A - 63A (marked rated current on device)

MCB 80A - 125A (marked rated current on device)

RCBO 6A - 40A (marked rated current on device)

Busbar stack I

nc ratings

Lower Hybrid stack module I

nc = 250A

Upper TPN stack module I

= 200A

Rated conditional short-circuit current of the ASSEMBLY (I

cc)

10kA

1 with equipment and arrangements specied in Hager’s technical

documentation / catalogue.

MCB/RCBO 10kA rating applied as BS EN 61439-3 is intended for use

by ordinary persons.

Current limitation characteristics specied in Hager’s technical

documentation / catalogue

Protection against electric shock

DBO shall be installed in an electrical system conforming to IEC 60364 /

BS 7671

Rated diversity factor (RDF) / Values of assumed loading

2 way - 3 way = 0.8

6 way - 8 way = 0.6

10 way - 24 way = 0.5

Note: RDF only applies to continuously and simultaneously loaded

circuits.

Rated frequency (fn)

50 Hz

Pollution degree

Types of system earthing for which the ASSEMBLY is designed

TNC-S, TN-S and TT when installed in an electrical system conforming

to BS 7671

Intended locations

Indoor use only

Stationary ASSEMBLY

Degree of protection

IP3XD with Door Closed

IP2XC with Door Open and compliment of outgoing devices and or

blanks tted.

Intended use

Distribution boards intended to be operated by ordinary persons (DBO)

Electromagnetic compatibility (EMC) classiﬁcation

EMC Environment B

External design

Wall-mounted, surface type, enclosed assembly.

Mechanical impact protection

IK05

The type of construction

Fixed parts

DBO Type

Type B DBO

JK2 Incomer Kits

Cat ref. No of Poles Description

JK21253M 3 MCCB 125A

JK21254M 4 MCCB 125A

JK22503M 3 MCCB 250A

JK22504M 4 MCCB 250A

JK22503S 3 Switch Disconnector 250A

JK22504MCS 4 Switch Disconnector 250A

JK22504D 4 Direct Connection

Meter Kits

Cat ref. Description

JK240PM Digital Multi Function Meter Pack Pulsed & Modbus

Accessories

JK250SP 250A Single Phasing Kit

JK01B Single Pole Blank

JK222PK JK1 / JK2 Door Lock Kit

JK02B 1.5 Module Single Pole Blank

JK2PLATEM Gland Plate + Drill Markings

Hager Ltd.

Hortonwood 50

Telford

Shropshire

TF1 7FT

Sales Service Centre: 01952 675 675

Technical Service Centre: 01952 675 689

ZD0809 - Issue 3ZD0809 - Issue 3 14

ZD0809 - Issue 3ZD0809 - Issue 3

Invicta 3

Hybrid Board

1.0 Module

T =

Min. 2.8Nm

Max. 3.5Nm

1.5 Module

T =

Min. 3.0Nm

Max. 5.0Nm

ISOLATE SUPPLY

BEFORE REMOVING COVER

PLY

FORE REMOVING COVER

Lighting

Supply

Sockets

First Floor

Pozidrive PZ2

Points with central

‘easy t’ xing point

Drill centre mark provided when tting SWA or conduit

Removal of gland plate

Cable protection

built into end plate

for trunking entry

Protected cable whilst

drawing into board without

need for SRBP / Paxolin

laminated sheet

Pozidrive PZ2

Fitting MCB / RCBO

Ability to number outgoing ways

on busbar stack Ability to write on with

pencil when installing.

Dedicated label pack

for front cover way

labelling

Meter kits t directly into the main board.

See overleaf for list of meter kits.

32 ZD0809 - Issue 3ZD0809 - Issue 3

Produktspecifikationer

Varumärke:	Hager
Kategori:	Växla
Modell:	JK20210BSD
Vikt:	180 g
Bredd:	94 mm
Djup:	70 mm
Höjd:	26 mm
Husmaterial:	Metaal
LED-indikatorer:	Link, Power
Nuvarande:	2 A
Anslutningsteknik:	Bedraad
Antal Ethernet LAN (RJ-45)-portar:	1
Certifiering:	FCC Part 15 Class A, CE
Inspänning:	5 V
Nätverksstandard:	IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x
Förvaringstemperatur:	-10 - 70 °C
Internera:	Nee
Våglängd:	- nm
Förvaringsfuktighet:	5 - 95 procent
Ethernet-gränssnittstyp:	2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Maximal dataöverföringshastighet:	10000 Mbit/s
Auto MDI/MDI-X:	Ja
Dataflödeshantering:	Ja
Stöd för Jumbo Frames:	Ja
Maximal-räckvidd:	60000 m
Automatisk förhandling:	Ja
Strömförbrukning (typiskt):	26 W
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	5 - 95 procent
Harmoniserad systemkod (HS):	85176990
Jumbo ramar:	16000
DIN-skena montering:	Ja
Lagra och vidarebefordra:	Ja
Kabeltyper som stöds:	Cat5, Cat5e, Cat6, Cat6a, Cat7
Fiberoptisk kontakt:	SFP+
Fiberkabeldiametrar stöds:	9/125, 50/125, 62.5/125 µm
Duplexsystem:	Full, Half
Fiberkanalportar:	1
Struktur för trådläge:	Multi-mode, Single-mode
Kabelteknik för fiber-ethernet:	10GBASE-X