Heritage Audio RAM System 2000 Bruksanvisning

Heritage Audio Kontroller RAM System 2000

Läs nedan 📖 manual på svenska för Heritage Audio RAM System 2000 (12 sidor) i kategorin Kontroller. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
1
RAM SYSTEM 2000 USER MANUAL
Jan 18th, 2018
Rev. 1.0, Firmware version V15
2
INSTALLING THE RAM SYSTEM 2000
Thanks for purchasing the RAM System 2000. Please make sure the following
items are in the box when you open it.
This manual.
RAM System 2000 main unit.
Power Supply labelled HA- .PSU03
Bluetooth antenna.
IEC Cable.
Depending on your system requirements, you will need several TRS cables to
hook up your system. Please check your input sources and output
destinations and buy the correct cables.
Additionally, please insert the Bluetooth antenna in its threaded connector in
case it comes unplugged from the factory.
The power supply is of the auto switching type so it works worldwide without
adjusting anything. In case your country uses a different mains cable other
than the one provided in the box, just get the correct one and you are done.
Plugging the unit will display a welcome message and firmware unit´s
version. Please note that after turning on the unit, MUTE will always be
engaged regardless of the level shown on the red knob. This is to prevent
damage of your speakers due to excessive level on startup.
Any time you plug the unit on, the status of the RAM System will be that of
the last time it was turned off, so there is no need to reset preset levels or
talkback gain. Last input and output chosen is also stored.
GENERAL DESCRIPTION
The Heritage Audio RAM SYSTEM 2000 is a professional monitor controller in
a convenient tabletop format. With its matrix of inputs and outputs, covering
3
balanced and unbalanced analog, Spd and the innovative if digital
pro qualifessional ty HA Bluetooth technology, the System 2000 will cover all
the monitoring needs of the most demanding professional facilities at a price
never heard before.
The level control is taken care of by means of microprocessor controlled gold
plated relays, giving an exceptional resolution of 64dB of attenuation in 1dB
steps. Keeping active electronics to a minimum, the attenuator is buffered
using state of the art Burr Brown circuitry for negligible coloration and no
noise.
Headphone monitoring is as critical as main speaker is. Usually a weak part
even in the most expensive units, the RAM System 2000 employs very high
current drivers in a diamond buffer configuration which are able to drive any
headphones to very high levels without coloration or noise. mplifiers It has 2 a
individually configurable.
INPUT FEATURES
The RAM System 2000 has the following stereo inputs:
INPUT 1: Balanced, accessible on a pair of TRS Jack connectors.
INPUT 2: Exactly as Input 1.
INPUT 3: Balanced by default, it can be configured as unbalanced -
10dBV by pressing SHIFT + IN3. The same key combination would
return this input to its balanced +4 configuration.
DIGITAL: Transformer isolated, it is available on the RCA connector
on the back of the unit. It is able to read signals up to 24 bit/ 96Khz
and gets the word clock from the input . source
BLUETOOTH: This input features the same architecture found in the
acclaimed Heritage -Audio BT 500. If you are not familiar with it, the
BT- 500 is an Audio Streaming device in a convenient 500 Series
format. It streams audio from your Bluetooth-equipped device and

Produktspecifikationer

Varumärke: Heritage Audio
Kategori: Kontroller
Modell: RAM System 2000

Behöver du hjälp?

Om du behöver hjälp med Heritage Audio RAM System 2000 ställ en fråga nedan och andra användare kommer att svara dig




Kontroller Heritage Audio Manualer

Kontroller Manualer

Nyaste Kontroller Manualer