Heritage Audio RAM System 5000 Bruksanvisning

Heritage Audio Kontroller RAM System 5000

Läs nedan 📖 manual på svenska för Heritage Audio RAM System 5000 (16 sidor) i kategorin Kontroller. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
1
RAM SYSTEM 5000 USER MANUAL
Feb. 19 th, 2018
Rev. 1.0, Firmware version V19
2
INSTALLING THE RAM SYSTEM 5000
Thanks for purchasing the RAM System 5000. Please make sure the following
items are in the box when you open it.
This manual.
RAM System 5000 main unit.
RAM System 5000 remote unit.
Power Supply labelled HA- .PSU02
3x Bluetooth antenna.
IEC Cable.
USB cable.
Depending on your system requirements, you will need several XLR, RCA,
DSUB snakes and digital cables to hook up your system. Please check your
input sources and output destinations and get yourself the correct cables.
Additionally, please insert the s in theirwireless antenna s threaded connector
in case they come unplugged from the factory.
The power supply is of the auto switching universal type so it works
worldwide without anything. In case your country uses a different adjusting
mains cable other than the one provided in the box, just get the correct one
and you are done.
The remote unit is operated by means of an internal rechargeable battery,
similar to that found in your mobile phone. A charging dock comes included
in the main unit, as is the USB cable. A red LED on the back of the remote unit
will light when being charged and the unit can be fully operated while in
charge mode. It is recommended to completely charge the battery on its first
use.
Please turn on the main unit and the remote unit thereafter. A “Connecting
message will display and, if connection is successful, a message will display
shortly thereafter.
3
Plugging the unit will display a welcome message and firmware unit´s
version. Please note that after turning on the unit, MUTE will always be
engaged regardless of the level shown on the red knob. This is to prevent
damage of your speakers due to excessive level on startup.
Any connection problems, the remote will show the message “NO CONSOLE”
and will try to reconnect again. It is normal to have this message for a few
seconds when turning on, no worries.
Any time you plug the unit on, the status of the RAM System will be that of
the last time it was stored, so there is no need to reset preset levels or
talkback gain. Last input and output chosen is also stored.
In order to save your preferred status, press SHIFT + OUT4 (SAVE STATUS)
GENERAL DESCRIPTION
The Heritage Audio RAM SYSTEM 5000 is a professional 5.1 ready monitor
controller in a convenient split format. With its matrix of inputs and outputs,
covering balanced and unbalanced analog, all digital formats common on a
state of the art Wolfson DAC, and the innovative professional quality HA
Bluetooth technology, the System 5000 will cover all the monitoring needs of
the most demanding professional facilities at a price never heard before.
The level control is taken care of by means of microprocessor controlled gold
plated relays, giving an exceptional resolution of 64dB of attenuation in 1dB
steps. Keeping active electronics to a minimum, the attenuator is buffered
using premium Burr Brown circuitry for negligible coloration and no noise.
Headphone monitoring is as critical as main speaker is. Usually a weak part
even in the most expensive units, the RAM System 5000 employs very high
current drivers in a diamond buffer configuration which are able to drive any
headphones to very high It has 2 amplilevels without coloration or noise. fiers

Produktspecifikationer

Varumärke: Heritage Audio
Kategori: Kontroller
Modell: RAM System 5000

Behöver du hjälp?

Om du behöver hjälp med Heritage Audio RAM System 5000 ställ en fråga nedan och andra användare kommer att svara dig




Kontroller Heritage Audio Manualer

Kontroller Manualer

Nyaste Kontroller Manualer