Hikvision DS-K3B961TX Bruksanvisning
Hikvision
Tillträdeskontrollsystem
DS-K3B961TX
Läs nedan 📖 manual på svenska för Hikvision DS-K3B961TX (2 sidor) i kategorin Tillträdeskontrollsystem. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
DS-K3B961TX Series
Swing Barrier
Quick Start Guide
UD27481B-B
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website (https://
www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting
the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognition features, biometrics data is stored in your device with encryption
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative
and physical security controls, conduct periodic reviews and assessments of the effectiveness of
your security controls.
ADS-26FSG-12 12024EPG
MSA-C2000IC12.0-24P-DE
Shenzhen Honor Electronic Co.,Ltd PG
MOSO Technology Co.,Ltd PDE
ADS-24S-12 1224GPG Shenzhen Honor Electronic Co., Ltd. PB
Use only power supplies listed in the user instructions:
1System Wiring 2Installation
3Wiring
Scan the QR code to view the
installation video.
Scan the QR code to view the wiring video.
Main Lane Control Board
Sub Lane Control Board Sub Access Control Board
Sub User Extended
Interface Board
Main Access Control Board
Sub User Extended
Interface Board
Sub User
Extended
Interface
Board
Exit：
RS-232：port 2, port 4
RS-485：port 5
Main User Extended
Interface Board Main User Extended
Interface Board
Entrance
Interconnecting
Cable
Interconnecting
Cable Interconnecting
Cable
Main
Switch
(Sub)
Main
Switch
(Main)
Main
Switch
(Main)
Main
Switch
(Sub)
Entrance：
RS-232：port 2, port 4
RS-485：port 5
Main User Extended
Interface Board
Steps:
1. Draw a central line on the installation surface of the left or right pedestal.
2. Draw other parallel lines for installing the other pedestals.
The distance between the nearest two lines is L+ 242 mm. L represents
the lane width.
3. Slot on the installation surface and dig installation holes according to the
hole position.
4. Bury cables. Each lane buries 1 network cable, 1 high voltage cable and 1 low
voltage cable. For details, see the system wiring diagram above.
The supplied interconnecting cable length is 5.5 m.
The suggested inner diameter of the low voltage conduit is
larger than 30 mm.
If you want to bury both of the AC power cord and the low
voltage cable, the two cables should be in separated conduits
to avoid interference.
If more peripherals are required to connect, you should
increase the conduit diameter or bury another conduit for the
external cables.
The external AC power cord should be double-insulated.
The network cable must be CAT5e or the network cable has
better performance. And the suggested network cable length
should be less than 100 m.
If the installation area is close to the wall, make sure the
distance between the pedestal and the wall should be
more than 20 mm, or you cannot open the pedestal's
top panel.
20 mm
Loudspeaker Interface
Reserved
IR Light Interface
Antenna Interface
Reserved
User Extended Interface Board
and Lane Control Board
Communication Interface
24 VDC Power Interface
Sub Access Control Board Interface
Network Switch Interface
Screen Adapter Interface
Sensor Inteface
Card Reader Board Interface
TF Card Slot
Initialization Button
Reserved
Debugging Port
(For debugging use only)
USB Flash Drive Interface
Loudspeaker Interface
Reserved
IR Light Interface
User Extended Interface Board
and Lane Control Board
Communication Interface
24 VDC Power Interface
Sub Access Control Board Interface
Screen Adapter Interface
Sensor Inteface
Card Reader Board Interface
TF Card Slot
Initialization Button
Reserved
Debugging Port
(For debugging use only)
USB Flash Drive Interface
Reserved
Reserved
Debugging Port
(For debugging use only)
Access Control Board
Communication
Interface
24 VDC Power Interface
Supercapacitor
IR Adapter and
ArrowBoard Interface
Reserved
Encoder Interface
Reserved
Power Supply
for Motor
Brake Interface
Sub User Extended
Interface Board BUS
Interconnecting
Interface
24 VDC Power Interface
Supercapacitor
IR Adapter and
ArrowBoard Interface
Reserved
Encoder Interface
Reserved
Power Supply
for Motor
Brake Interface
User Extended
Interface Board BUS
Interconnecting
Interface
Reserved
Debugging Port
(For debugging use only)
Reserved
Access Control Board
Communication
Interface
DIP Switch
Reserved
Event Input
Wiegand
Alarm Output
Lock
24 VDC Output
12 VDC Output
Exit Button
Fire Input
5 VDC Output
RS-485
RS-232
SCL
SDA
CASE1
CASE2
GND
GND
232RX
232TX
12V
BZ
W1
W0
GND
GND
NC1
NC3
NC2
NC4
NO1
NO3
NO2
NO4
24VOUT1
12VOUT1
5VOUT1
GND
GND
GND
GND
GND
GND
GND
BTN
GND
ALARM IN
232RX 232TX 485- 485+
24VOUT2
12VOUT2
5VOUT2
COM1
COM3
COM2
COM4
RS-232
12V
BZ
W1
W0
GND
GND
RS-485
232RX 232TX 485- 485+
RS-232
Reserved
232RX
GND
CASE2
CASE1
GND
232TX
12V
BZ
W1
W0
GND
GND
24VOUT1
12VOUT1
5VOUT1
GND
GND
GND
GND
GND
GND
GND
BTN
24VOUT2
12VOUT2
5VOUT2
Wiegand
24 VDC Output
12 VDC Output
Exit Button
5 VDC Output
RS-232
Low Voltage
Access Control Board
Low Voltage
Access Control Board
Low Voltage Low Voltage
High Voltage
Main Switch
High Voltage
Main Switch
High Voltage
Main Switch
High Voltage
Network Cable Network Cable
Low Voltage
Access Control Board
Low Voltage
Access Control Board
Entrance
L
L
L
L
L
L + 242 mm
1450 mm
100 mm
117 mm
Cable Hole
Fix each pedestal
with 4 expansion
bolts of M12*120
80 mm
95 mm
50 mm
Entrance
1020 mm
1600 mm
1651 mm
100 mm
117 mm Lane Width
50 mm
200 mm
950 mm
46 mm
+ -
+ -
+
+
-
-
Scan the QR code to get the user
manual for detailed informa�on.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the RE Directive
2014/53/EU, the EMC Directive 2014/30/EU, the
RoHS Directive 2011/65/EU.
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to
your supplier or to a designated collection point.
For more information see: www.recyclethis.info
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
Warning
In the use of the product, you must be in strict compliance
with the electrical safety regulations of the nation and
region.
Do not connect several devices to one power adapter as
adapter overload may cause over-heat or fire hazard.
If smoke, odors or noise rise from the device, turn off the
power at once and unplug the power cable, and then
please contact the service center.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
1. Do not ingest battery. Chemical burn hazard!
2. This product contains a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
3. Keep new and used batteries away from children.
4. If the battery compartment does not close securely,
stop using the product and keep it away from children.
5. If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
6. CAUTION: Risk of explosion if the battery is replaced by
an incorrect type.
7. Improper replacement of the battery with an incorrect
type may defeat a safeguard (for example, in the case of
some lithium battery types).
8. Do not dispose of the battery into fire or a hot oven, or
mechanically crush or cut the battery, which may result in
an explosion.
9. Do not leave the battery in an extremely high
temperature surrounding environment, which may result
in an explosion or the leakage of flammable liquid or gas.
10. Do not subject the battery to extremely low air
pressure, which may result in an explosion or the leakage
of flammable liquid or gas.
11. Dispose of used batteries according to the instructions
Caution
Do not drop the device or subject it to physical shock, and
do not expose it to high electromagnetism radiation. Avoid
the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment
damage).
Do not place the device in extremely hot (refer to the
specification of the device for the detailed operating
temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
Exposing the equipment to direct sun light, low ventilation
or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger). The device cover for
indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation
or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger).
Please use a soft and dry cloth when clean inside and
outside surfaces of the device cover, do not use alkaline
detergents.
Biometric recognition products cannot completelybe
applicable to anti-spoofing environments. If you require a
higher security level, use multiple authentication modes.
The serial port of the equipment is used for debugging
only.
Wall Mounting: Install the equipment according to the
instructions in this manual. To prevent injury, this
equipment must be securely attached to the floor/wall in
accordance with the installation instructions.
Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent
type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
This bracket is intended for use only with equipped
devices. Use with other equipment may result in instability
causing injury.
This equipment is for use only with equipped bracket. Use
with other (carts, stands, or carriers) may result in
instability causing injury.
！
！
Safety Instruction
Study Mode
Normal Mode
Work Mode
Enable Keyfob Paring Mode Disable Keyfob Paring Mode
Keyfob Paring Mode
See Wiring Diagram of
Right Pedestal for
Sub User Extended
Interface Board
See Wiring Diagram of
Right Pedestal for
Main User Extended
Interface Board
Main User Extended
Interface Board
Sub User Extended
Interface Board
Entrance
DIP Switch
Reserved
Reserved
Wiegand
Alarm Output
Lock
24 V Output
12 V Output
5 V Output
Exit Button
Fire Alarm
Input
Exit
Button
Fire Alarm Module
Remain OpenLow level Signal
RS-232
SCL
SDA
CASE1
CASE2
GND
GND
232RX
232TX
12V
BZ
W1
W0
GND
GND
NC1
NC3
NC2
NC4
NO1
NO3
NO2
NO4
24VOUT1
12VOUT1
5VOUT1
GND
GND
GND
GND
GND
GND
GND
BTN
GND
ALARM IN
232RX 232TX 485- 485+
24VOUT2
12VOUT2
5VOUT2
COM1
COM3
COM2
COM4
232RX 232TX 485- 485+
Event Input
232RX
232TX
12V
CASE1
CASE2
GND
GND
BZ
W1
W0
GND
GND
24VOUT1
12VOUT1
5VOUT1
GND
GND
GND
GND
GND
GND
GND
BTN
24VOUT2
12VOUT2
5VOUT2
Wiegand
24 V Output
12 V Output
Exit Button
5 V Output
RS-232
PWR
GND
W0
W1
Beep
ERR
OK
Wiegand
Card Reader
PWR
PWR
RS-485+
TX
RS-485-
RX
GND
GND
Red
Red
Red
Black
Black
Yellow
Yellow
Blue
Blue
Red
Black
Blue
Yellow
Red
Yellow
Blue
Black
Purple
White
Green
Black
PWR
GND
W0
W1
Beep
ERR
OK
Wiegand
Card Reader
Red
Purple
White
Green
Black
Alarm Output
Remain Open
12 V
+ -
Exit
Button
232RX
232TX
485-
485+
PWR
PWR
232TX
232RX
GND
GND Peripheral
Device
Peripheral
Device
232RX
232TX
485-
485-
485+
485+
Event Input
Event Input
Wiring Diagram DIP Switch Description
Peripheral
Device
Peripheral
Device
Network
Interface
of PoE
Network
Interface
of PoE
Interconnecting
Interface
Interconnecting
Interface
Interconnecting
Interface Interconnecting
Interface
Platform Platform
Network
Cable
Network
Cable
Produktspecifikationer
| Varumärke: | Hikvision |
| Kategori: | Tillträdeskontrollsystem |
| Modell: | DS-K3B961TX |
Behöver du hjälp?
Om du behöver hjälp med Hikvision DS-K3B961TX ställ en fråga nedan och andra användare kommer att svara dig
Tillträdeskontrollsystem Hikvision Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025
28 Mars 2025
Tillträdeskontrollsystem Manualer
- Tillträdeskontrollsystem Bosch
- Tillträdeskontrollsystem Honeywell
- Tillträdeskontrollsystem Abus
- Tillträdeskontrollsystem Apc
- Tillträdeskontrollsystem Acti
- Tillträdeskontrollsystem Yale
- Tillträdeskontrollsystem Eminent
- Tillträdeskontrollsystem Axis
- Tillträdeskontrollsystem Velleman
- Tillträdeskontrollsystem Techly
- Tillträdeskontrollsystem Steren
- Tillträdeskontrollsystem Viking
- Tillträdeskontrollsystem Burg-Wachter
- Tillträdeskontrollsystem Dahua Technology
- Tillträdeskontrollsystem GeoVision
- Tillträdeskontrollsystem Safescan
- Tillträdeskontrollsystem Liftmaster
- Tillträdeskontrollsystem Marmitek
- Tillträdeskontrollsystem Delta Dore
- Tillträdeskontrollsystem DSC
- Tillträdeskontrollsystem Iget
- Tillträdeskontrollsystem EverFocus
- Tillträdeskontrollsystem Satel
- Tillträdeskontrollsystem EQ3
- Tillträdeskontrollsystem Chief
- Tillträdeskontrollsystem ETiger
- Tillträdeskontrollsystem ASSA ABLOY
- Tillträdeskontrollsystem Provision ISR
- Tillträdeskontrollsystem IOGEAR
- Tillträdeskontrollsystem Suprema
- Tillträdeskontrollsystem Vimar
- Tillträdeskontrollsystem Speco Technologies
- Tillträdeskontrollsystem ZKTeco
- Tillträdeskontrollsystem HID Identity
- Tillträdeskontrollsystem Panduit
- Tillträdeskontrollsystem EQ-3
- Tillträdeskontrollsystem Indexa
- Tillträdeskontrollsystem ONE Smart Control
- Tillträdeskontrollsystem Approx
- Tillträdeskontrollsystem Gewiss
- Tillträdeskontrollsystem SOREX
- Tillträdeskontrollsystem Atlantis Land
Nyaste Tillträdeskontrollsystem Manualer
27 Mars 2025
20 Februari 2025
28 Januari 2025
27 Januari 2025
6 Januari 2025
1 Januari 2025
30 December 2025
22 December 2024
16 December 2024
16 December 2024