Hikvision NS-0105P-35 Bruksanvisning

Hikvision Växla NS-0105P-35

Läs nedan 📖 manual på svenska för Hikvision NS-0105P-35 (2 sidor) i kategorin Växla. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Applicable Models

This manual is applicable to NS-0105P and NS-0109P series 100M long-range PoE switch.

Symbol Convenons

The symbols that may be found in this document are deﬁned as follows.

·During the installaon and ulizaon of the device, please strictly conform to electrical

safety rules in diﬀerent naons and regions.

·Ensure to use the aached power adaptor only and not to change the adaptor randomly.

Please refer to speciﬁcaon table for speciﬁc requirements of power adaptor.

·If the product does not work properly, please contact your dealer or the nearest service

center. Never aempt to disassemble the camera yourself. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

·The device must be installed in machine room only, and only maintenance staﬀ or

qualiﬁed person should access to the device.

·Do not touch the upper cover area of the device that may be overheated.

·Power must be shut down during cable connecon, device installaon and

dismantlement.

·You shall acknowledge that the use of the device with Internet access might be under

network security risks, please strengthen protecon for your personal informaon and

data security. If you ﬁnd the device might be under network security risks, please contact

with us.

·Proper conﬁguraon of all passports and other security sengs is the responsibility of

the installer, and you shall keep user name and passports properly.

·Please keep all original packing materials properly. If the product does not work

properly, pack the switch in its original packing materials for shipping. We shall not assume

any responsibility for damages caused by improper packing materials during shipping.

·Ensure that your devices powered via the PoE port have their shells protected and

ﬁre-proofed, because the switches are not compliant with the Limited Power Source (LPS)

standard.

·This is a class A product and may cause radio interference in which case the user may be

required to take adequate measures.

Device Connecon

Connect your devices according to your actual networking requirements.

Interfaces

Rear Panel

Grounding Terminal

Power Interface

DIP Switch

On: Extend model is on, connecng PoE port 1-4 (4 ports), 1-8 (8 ports).

Oﬀ: Extend model is oﬀ.

Grounding Terminal

The grounding terminal connects with ground cable in case of lightning.

Power Port

Connect power port of the switch with power socket with power cord

to provide power to the switch.

Front Panel

Packing List

Switch x 1 Quick Start Guide x 1

Power Adapter x 1

DC 48V

DIP Switch

PoE Ports

100M PoE ports connect to other PoE devices with network cable.

UPLINK

100M network port connects to other switches with network cable.

PWR Indicator

Solid means powered up normally. Unlit means no power supply

connected or power supply is abnormal.

PoE-MAX Indicator

Solid/ﬂashing means the output power of the switch will reach the

upper limit, and the power supply may be abnormal if more devices

are connected. Unlit means power supplying is normal.

NS-0105P Series：

NS-0109P Series：

1 2 3 54

LINK/ACT Indicator

PoE Indicator

PoE-MAX Indicator

PWR

Indicator PoE Ports UPLINK

1 2 3 5 6 7 94 8

PoE-MAX Indicator

PWR

Indicator

LINK/ACT Indicator PoE Indicator

PoE Ports UPLINK

Up to 250 m

Camera

100M PoE Switch

Convergence Switch NVR Monitor

Indicates a hazard with a high level of risk, which if

not avoided, will result in death or serious injury.

Symbol Descripon

Provides addional informaon to emphasize or

supplement important points of the main text.

Indicates a potenally hazardous situaon, which if not

avoided, could result in equipment damage, data loss,

performance degradaon, or unexpected results.

4/8-Port 100M Long-Range PoE Switch

Quick Start Guide

Power-On Checking Regulatory Informaon

FCC Informaon

Please take aenon that changes or modiﬁcaon not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protecon against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instrucon

manual, may cause harmful interference to radio communicaons. Operaon of this

equipment in a residenal area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operaon.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

under the EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU,

the RoHS Direcve 2011/65/EU.

2012/19/EU (WEEE direcve): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collecon points.

For more informaon see: www.recyclethis.info

2006/66/EC (baery direcve): This product contains a baery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentaon for speciﬁc baery informaon. The baery is marked with this

symbol, which may include leering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated

collecon point. For more informaon see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

See the following table and check whether your devices are correctly

connected. Aer proper connecon, you can use your switch without

doing any sengs.

Indicator Status Descripon

PWR

Solid

Unlit

Solid

Unlit

Flashing

The switch is powered on normally.

No power supply connected or power

supply is abnormal.

Link/Act

The port is connected.

The port is transming data.

The port is disconnected or connecon

is abnormal.

Please use the aached power cord in package to power up the switch.

The switch supports auto MDI/MDIX of ports, you can use

straight-through cable or crossover cable to connect the switch

and opposite Ethernet devices.

UD15463B

678

PoE Solid

Unlit

The switch provides power supply to PD

normally.

The switch is disconnected to PD, or

provides power supply to PD abnormally.

PoE-MAX

Solid

/Flashing

Unlit

The output power of the switch will reach

the upper limit. The power supply may be

abnormal if more devices are connected.

The switch provides power supply to PD

normally.

Quick Start Guide

Any and all informaon, including, among others, wordings, pictures, graphs are the

properes of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer

referred to be “Hikvision”). This user manual (hereinaer referred to be “the Manual”)

cannot be reproduced, changed, translated, or distributed, parally or wholly, by any

means, without the prior wrien permission of Hikvision. Unless otherwise spulated,

Hikvision does not make any warranes, guarantees or representaons, express or implied,

regarding to the Manual.

About this Manual

This Manual is applicable to NS-0105P and NS-0109P series 100M long-range PoE switch.

The Manual includes instrucons for using and managing the product. Pictures, charts,

images and all other informaon hereinaer are for descripon and explanaon only. The

informaon contained in the Manual is subject to change, without noce, due to ﬁrmware

updates or other reasons. Please ﬁnd the latest version in the company website

( ). hp://overseas.hikvision.com/en/

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properes of Hikvision in

various jurisdicons. Other trademarks and logos menoned below are the properes of

their respecve owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS

AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A

PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG

OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS

OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN

IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE

CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT

THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATER PREVAILS.

Produktspecifikationer

Varumärke:	Hikvision
Kategori:	Växla
Modell:	NS-0105P-35
Färg på produkten:	Zwart
LED-indikatorer:	Ja
Instruktioner:	Ja
Bluetooth-version:	5.2
USB-kontakttyp:	USB Type-C
Anslutningsteknik:	Bedraad en draadloos
Frekvensband:	2.4 GHz
Typ av strömkälla:	Battery, USB
Typ av bakgrundsbelysning:	RGB LED
Rekommenderad användning:	Gamen
Bakgrundsbelysning:	Ja
Förbindelse:	USB + RF Wireless + Bluetooth
Genvägar:	Ja
Bakgrundsbelysning-färg:	Meerkleurig
Numerisk knappsats:	Nee
Inkluderar mus:	Nee
Pekdon:	Nee
Windows-tangenter:	Ja
Keyboard i ö-stil:	Nee
Ytfärg:	Monochromatisch
Medföljande mottagare:	Ja
Programmerbara snabbtangenter:	Ja
Handledsstöd:	Ja
Trådlöst mottagargränssnitt:	USB Type-A
Tangentbordsknappbrytare:	Mechanische keyswitch
Tangentbordsstorlek:	Tenkeyless/toetsenbord zonder numeriek toetsenblok (80 - 87%)
Stil tangentbord:	Recht
Tangentbordsmått (BxDxH):	356 x 136 x 39 mm
Tangentbords vikt:	854 g
Antal-produkter-ingår:	1 stuk(s)
Multimedia nycklar:	Ja
Röstningskvot:	1000 Hz
Anti-ghosting:	Ja
Tangentbordsknappbrytarteknik:	ROG RX Red
Flexibelt tangentbord:	Nee
Keycaps material:	Polybutylene terephthalate (PBT)
Keycaps:	Double shot