Hitachi CP-X950W Bruksanvisning

Hitachi Projektorer CP-X950W

Läs nedan 📖 manual på svenska för Hitachi CP-X950W (30 sidor) i kategorin Projektorer. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/30

Contents Page

Liquid Crystal Projector

Model name

CP-X950W/E

OPER TING GUIDEA

Thank you very much for purchasing this Hitachi Liquid Crystal Projector.

Please read this operating guide to use correctly. After reading this manual, keep it carefully for future

reference.

Before us ............................. 3e

Names and functions of each

part ............................... 8

Installatio ........................... 11n

Basic operation .................. 12s

Adjustments and function .. 14s

Connection to the video signal

terminal ..................... 19s

Connection to the RGB signal

terminal ..................... 19s

Connection to the control

signal termina ............ 22l

Example of system setu .... 27p

Cleaning the air ﬁlte ........... 27r

Lamp ................................... 28

Message tabl ..................... 28e

When you think something

wrong ......................... 29

Specification ...................... 30s

LAMP

TEMP

STANDBY

/ON

INPUT

MUTE

ZOO M

FOCUS

RESET

Outline

This Liquid Crystal Projector can display various

computer signals and NTSC/ AL/SECAM video signals.P

Features

(1) High brightness

A highly efficient optical system with a metal halide lamp

ensures high brightness.

(2) High resolution

Three separate high-definition liquid crystal panels are used

for the R, G and B signals.

(3) Compact size, light weight for portability

(4) RGB output terminal

(5) RS232C Communication

(6) Mouse emulation

(7) Power zoom and power focus functions

(8)

Complies with VESA DDC1/2B speciﬁcations

FOR THE CUSTOMERS IN U.K

THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE.

FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE.

IMPORTANT FOR UNITED KINGDOM

WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is

indicated on the pin face of the plug. Shoud the fuse need to be replaced, an ASTA or BSI approved BS 1362

fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If

a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug.

Fuse covers are available from your dealer.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension

lead or consult your dealer.

Shoud it be necessary to change the mains plugs, this must be carried out by a competent person, preferable a

qualified electrician.

If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first

removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.

WARNING: THIS EQUIPMENT MUST BE EA THEDR

IMPO AN :RT T

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow = Earth, Blue = Neutral, Brown = Live.

As these colours may not correspond with the coloured makings identifying the terminals in your plug, proceed

as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked

with the letter E or by the earth symbol or coloured Green or Green and Yellow.

The wire coloured Blue must be connected to the terminal marked with the letter N or coloured BLUE or

BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured

BROWN or RED.

Green & Yellow to Earth

Blue to Neutral

Brown to Live

Fuse

Cord Clamp

WARNING: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications, Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Instructions to Users:

This equipment complies with the requirements of FCC (Federal Communication Commission) Class A

equipments provided that following conditions are met.

(1) Video signal cables:

Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be

connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal pipes

or similar way to reduce the interference noise radiation.

(2) Power cord:

Shielded power cord must be used. The outer shield must be connected to the ground.

(3) Video inputs:

The input signal amplitude must no exceed the specified level.

The mark informs you that there is a warning (including caution).

The concrete details of the warning (the left diagram shows the caution for an

electric shock hazard) is shown in the diagram.

The mark informs you of a prohibited action. The concrete prohibited action

(the left diagram shows the prohibition of disassembly) is drawn in the diagram

or near it.

The mark informs you of actions you must do. The concrete instruction

details (the left diagram shows “Disconnect the power plug from the power

outlet”) is drawn in the diagram.

Examples of

illustrated

marks

This shows that a person could be killed or injured if the wrong operation

is done by ignoring this indication.

This shows that a person could be injured or material may be damaged if

the wrong operation is done by ignoring this indication.

Caution

Warning

Illustrated marks Various illustrated marks are used in this product and instruction manual so the product

is used correctly and safely, and also to protect you and others from danger and your

property from being damaged.

Before use

Produktspecifikationer

Varumärke:	Hitachi
Kategori:	Projektorer
Modell:	CP-X950W
Färg på produkten:	Zwart
Vikt:	5350 g
Bredd:	248 mm
Djup:	248 mm
Höjd:	1012 mm
Förpackningens vikt:	5800 g
Förpackningens bredd:	232 mm
Djuppackning:	192 mm
Förpackningshöjd:	1051 mm
Snäll:	Tower
Integrerad klocka:	Ja
Kraftkälla:	AC
Blåtand:	Ja
Typ av förpackning:	Doos
Fjärrkontroll:	Draadloos
Beeldscherm:	Ja
Ljudformat som stöds:	MP3
USB uttag:	Ja
Närfältskommunikation (NFC):	Ja
Anslutningsteknik:	Bedraad en draadloos
Medföljande kablar:	Audio (3,5 mm)
Integrerad minneskortläsare:	Nee
Ursprungsland:	China
Larmfunktion:	Ja
Antal USB 2.0-portar:	1
Audio-ingan (L, R):	1
Genomsnittlig effekt:	120 W
Volymkontroll:	Digitaal
Plug and play:	Ja
Bruttovikt:	5800 g
Inspänning:	100 - 240 V
siffra:	1
Rekommenderad användning:	Universeel
Bakgrundsbelysning-färg:	Wit
Frekvens:	50 / 60 Hz
Ljudutgångskanaler:	2.1 kanalen
Högtalarplacering:	Vloer
Bashögtalare:	Ja
Fjärrstyrd:	Ja
Linjeingång:	Ja
Spela MP3:	Ja
AUX ingång:	Ja
Bluetooth-räckvidd:	10 m
Frekvensband som stöds:	FM, PLL
Antal förinställda kanaler:	20
Optisk skivspelare:	Nee
Kassettdäck:	Nee
Apple dockning:	Nee
Laddning via USB:	Ja
FM-band:	87.5 - 108 MHz
Färgning:	Monochromatisch
Fjärrkontroll ingår:	Ja
(Ytter) huvudpaketets höjd:	1069 mm
(Ytter) huvudförpackningens bredd:	246 mm
(Ytter) huvudförpackningens bruttovikt:	6850 g
(Ytre) huvudpaketets längd:	206 mm
Kvantitet per (yttre) huvudkartong:	1 stuk(s)
Justering av basnivå:	Ja
Wifi:	Nee
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Slaaptimer:	Ja
Type beeldscherm:	LED
Bakgrundsbelyst display:	Ja
Diskantjustering:	Ja
Produkter per intermodal container (40 fot - High Cube):	1089 stuk(s)
Produkter per intermodal container (20 fot):	531 stuk(s)