Hitachi UC 7SB Bruksanvisning

Läs nedan 📖 manual på svenska för Hitachi UC 7SB (13 sidor) i kategorin Batteriladdare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
Handling instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per luso
Gebruiksaanwijzing
Instrucciones de manejo
Read through carefully and understand these instructions before use.
Diese Anleitung vor Benutzung des Werkzeugs sorgfältig durchlesen und verstehen.
Lire soigneusement et bien assimiler ces instructions avant usage.
Prima dell’uso leggere attentamente e comprendere queste instruzioni.
Deze gebruiksaanwijzing s.v.p. voor gebruik zorgvuldig doorlezen.
Leer cuidadosamente y comprender estas instrucciones antes del uso.
CHARGER
LADEGERÄT
CHARGEUR
CARICATORE
OPLADER
CARGADOR
UC 7SB
Italiano Nederlands Español
Batteria ricaricabile Oplaadbare batterij Batería recargable
Etichetta della batteria Naamplaatje van de batterij Placa de características de la
batería
Inserire lnsteken Insertar
Spia Kontrolelampje Lámpara piloto
Foro di collegamento della Aansluiting voor oplaadbare Agujero para conectar la batería
batteria ricaricabile batterij recargable
Ventola Ventilator Ventilador
English Deutsch Français
Rechargeable battery Ladebatterie Batterie rechargeable
Name plate of battery Typenschild der Batterie Plaque nominale de la batterie
Insert Einsetzen Insérer
Pilot lamp Kontrollampe Lampe témoin
Hole for connecting the Anschlußloch für Akkumulator Orifice de raccordement de la
rechargeable battery batterie rechargeable
Ventilation slot Ventilator Ventilateur
1
12
12
1
2
3
4
5
6
1
2
3
4
5
6
3
6
5
1
4
English
2
GENERAL OPERATIONAL PRECAUTIONS
1. Keep work area clean. Cluttered areas and benches
invite accidents.
2. Avoid dangerous environment. Don’t expose power
tools and charger to rain. Don’t use power tools
and charger in damp or wet locations. And keep
work area well lit. Never use power tools and
charger near flammable or explosive materials. Do
not use tool and charger in presence of flammable
liquids or gases.
3. Keep children away. All visitors should be kept
safe distance from work area.
4. Store idle tools and charger. When not in use,
tools and charger should be stored in dry, high
or locked-up place–out of reach of children. Store
tools and charger in a place where the tempera-
ture is less than 40°C.
5. Don’t abuse cord. Never carry charger by cord or
yank it to disconnect from receptacle. Keep cord
from heat, oil and sharp edges.
6. When the charger is not in use, or when being
maintained and inspected, disconnect its power
cord from the receptacle.
7. To avoid danger, always use only the specified
charger.
8. Use only genuine HITACHI replacement parts.
9. Do not use power tools and charger for applications
other than those specified in the Handling
Instructions.
10. To avoid personal injury, use only the accessories
or attachment recommended in these handling
instructions or in the HITACHI catalog.
11. Let only the authorized service center do the
repairing. The Manufacturer will not be respon-
sible for any damages or injuries caused by repair
by the unauthorized persons or by mishandling
of the tool.
12. To ensure the designed operational integrity of
power tools and charger, do not remove installed
covers or screws.
13. Always use the charger at the voltage specified
on the nameplate.
14. Always charge the battery before use.
15. Never use a battery other than that specified. Do
not connect a usual dry cell, a rechargeable battery
other than that specified or a car battery to the
power tool.
16. Do not use any transformer that has a booster.
17. Do not charge the battery from an engine electric
generator or DC power supply.
18. Always charge indoors. Because the charger and
battery heat slightly during charging, charge the
battery in a place not exposed to direct sunlight;
where the humidity is low and the ventilation
good.
PRECAUTIONS FOR CHARGER
1. Always charge the battery at a temperature of 10 –
40°C. A temperature of less than 10°C will result
in over charging which is dangerous. The battery
cannot be charged at a temperature higher than
40°C. The most suitable temperature for charging
is that of 20 – 25°C.
2. Do not use the charger continuously.
When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
3. Do not charge the battery for more than 1 hour.
The battery will be fully charged in about 1 hour
and charging should be stopped when 1 hour has
elapsed from commencement. Disconnect the
charger power cord from the receptacle.
4. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
5. Never disassemble the rechargeable battery and
charger.
6. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric
current and overheat. It results in burn or damage
to the battery.
7. Do not dispose of the battery in fire.
If the battery is burnt, it may explode.
8. Using an exhausted battery will damage the
charger.
9. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery
life becomes too short for practical use. Do not
dispose of the exhausted battery.
10. Do not insert object into the air ventilation slots
of the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
SPECIFICATIONS
APPLICATION
For charging the HITACHI BATTERY (EB7).
CHARGER
Model UC7SB
Charging time Approx. 1 hour (at 20°C)
Charging voltage 7.2 V
Weight 1.0 kg

Produktspecifikationer

Varumärke: Hitachi
Kategori: Batteriladdare
Modell: UC 7SB
Färg på produkten: Zwart
Vikt: 1800 g
Bredd: 267 mm
Djup: 162 mm
Höjd: 44 mm
Ljudnivå: 41 dB
Förpackningens vikt: 2700 g
Förpackningens bredd: 375 mm
Djuppackning: 235 mm
Förpackningshöjd: 61 mm
Medföljande kablar: AC
Strömförbrukning (max): 210.8 W
Certifiering: LVD, BSMI\nFCC 15 A, CE EMC A, BSMI ENC\nRoHS A
Internminne: 256 MB
Nätverksstandard: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Säkerhetsalgoritmer som stöds: SNMP, SNMPv2, SNMPv3, SSH-2, SSL/TLS
Förvaringstemperatur: -40 - 70 °C
Firmware-uppgradering möjlig: Ja
Webbaserad hantering: Ja
Förvaringsfuktighet: 10 - 95 procent
Rackmontering: Ja
MAC-adressfiltrering: Ja
Flashminne: 32 MB
Medeltid mellan fel (MTBF): 587477 uur
Quality of Service (QoS): Ja
VLAN=support: Ja
Virtuella LAN-funktioner: Port-based VLAN, Private VLAN, Protocol-based VLAN, Voice VLAN
Åtkomstkontrolllista (ACL): Ja
Power over Ethernet (PoE): Ja
Växlingskapacitet: 20 Gbit/s
MAC-ställbar: 16000 entries
10G-stöd: Nee
Dataflödeshantering: Ja
Prisbegränsande: Ja
IGMP snokar: Ja
Växlingstyp: Managed
Stöd för multicast: Ja
Antal grundläggande switchande RJ-45 Ethernet-portar: 10
Byt lager: L2
Typ grundläggande switchande RJ-45 Ethernet-portar: Gigabit Ethernet (10/100/1000)
Paketbuffertminne: 1.5 MB
Spanning tree protokoll: Ja
Anslutningsaggregation: Ja
Koppar Ethernet-kabelteknik: 10BASE-TX, 1000BASE-T
DHCP-funktioner: DHCP client, DHCP relay, DHCP snooping, DHCPv6 client, DHCPv6 relay
Värmeavledning: 718.828 BTU/h
AC-ingångsspänning: 100 - 240 V
AC-ingångsfrekvens: 50 - 60 Hz
Drifttemperatur (TT): 0 - 50 °C
Relativ luftfuktighet i drift (VV): 10 - 95 procent
Total Power over Ethernet (PoE) budget: 180 W
Frakthastighet: 15 Mpps
Antal Power over Ethernet-portar (PoE).: 8
Broadcast stormbeheer: Ja
Systemhändelselogg: Ja
Antal Combo SFP-portar: 2
Autentiseringstyp: IEEE 802.1x, RADIUS
Konfigurera platsinställningar (CLI).: Ja
Autentisering: Guest VLAN, MAC-based authentication

Behöver du hjälp?

Om du behöver hjälp med Hitachi UC 7SB ställ en fråga nedan och andra användare kommer att svara dig




Batteriladdare Hitachi Manualer

Batteriladdare Manualer

Nyaste Batteriladdare Manualer