Hobart FP100 Bruksanvisning
Hobart
Matberedare
FP100
Läs nedan 📖 manual på svenska för Hobart FP100 (8 sidor) i kategorin Matberedare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com F-17645 Rev C (August 2008)
FP100 FOOD PROCESSOR
MODEL FP100 ML-38962
– 2 –
© HOBART, 2008
Installation, Operation and Care of
MODEL FP100 FOOD PROCESSOR
SAVE THESE INSTRUCTIONS
GENERAL
The Model FP100 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing
vegetables, fruits or cheese. The compact unit is designed for ease of operation and quick cleaning.
INSTALLATION
UNPACKING
Immediately after unpacking the FP100, check for possible shipping damage. If the food processor is
found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to ensure that it agrees with the specifi cations on the data
plate located at the rear.
Do not lift the food processor with any hinged or extended parts; lift only with the black carrying handle
located on the top of the motor housing.
LOCATION
The FP100 should be operated on a suitable counter height surface. A pan (not provided), suitable for
kitchen use, can be used to capture the product at the exit chute.
ELECTRICAL CONNECTIONS
The electrical cord on this machine is equipped with a grounding- type plug which
must be connected to a properly grounded receptacle. If the receptacle is not the proper grounding
type, contact an electrician. Do not remove the grounding prong from the plug.
OPERATION
Rotating knives inside. Always use pusher plate. Keep hands out.
Proper assembly of the FP100, including selection of the appropriate cutters, is necessary for correct
operation of the food processor (Fig's. 1 & 2). Refer to the Cutting Tool Guide for sizes of cutters and
refer to the appropriate operation instructions.
CONTROLS
START (Green) — Push to start.
STOP (Red) — Push to stop.
Interlock switches prevent the machine from operating when the feed hopper is out of position or the pusher
plate is raised. If these features do not function as described, contact your local Hobart service offi ce.
During operation, when the pusher plate is fully raised and rotated, the machine stops. When the pusher
plate is rotated above the feed hopper and starts down, the machine will restart — you do not need to
push the green START switch unless STOP was pressed.
Always push the red STOP switch before changing cutters or cleaning.
– 3 –
OPERATIONS WITH A SINGLE PLATE (FIG. 1)
Slicing, Shredding, Grating and Julienne Cutting
1. Grasp pistol grip handle, raise pusher plate and turn to the left.
2. Release the feed hopper lock by turning the fi nger paddle
counterclockwise. Then raise the feed hopper.
3. Lower the fl inger plate on the knife shaft until the fl inger plate
seats on the shaft pin.
4. Select the appropriate plate for the job. Place the plate on the
shaft, turning until engaged.
5. Lower the feed head.
NOTE: When the pusher plate is rotated and lowered, the feed head
will automatically be locked.
OPERATIONS WITH TWO PLATES (FIG. 2)
Dicing
1. Raise the pusher plate and turn it to the left.
2. Release the feed hopper lock by turning the fi nger paddle
counterclockwise. Then raise the feed hopper.
3. Lower the fl inger plate on the knife shaft until the fl inger plate
seats on the shaft pin.
5. Select the proper size dicing plate and place it correctly on the
knife shaft above the fl inger plate. Select the appropriate slicing
plate for the job (see Cutting Tool Guide). Place the slicing plate
on the shaft, turning until engaged.
6. Lower the feed hopper.
NOTE: When the pusher plate is rotated and lowered, the feed hopper will automatically be locked.
USING THE FEED HOPPER
After the pusher plate is raised, prepared products such as potatoes, carrots, onions, lettuce, cabbage,
etc., can be placed in the large feed hopper.
When cutting French fries with the Julienne cutter, position the potatoes at the lower right corner of the
large feed hopper. The potatoes may be stacked to cut several at one time. For consistent results, stack
product in the lower right corner of the feed hopper, one pile only.
The large feed hopper is also used to slice round products such as lemons or tomatoes. Position the product
in the lower right corner of the feed hopper. For best results, it is advisable to remove tops and tails from
products like lemons, limes or onions and place them in the hopper perpendicular to the desired cut.
USING THE FEED TUBE
Twist the knob to release the catch on the feed tube pusher and pull out to expose the feed tube
opening.
The feed tube is used for slicing long, thin-shaped products such as cucumbers or carrots, or to contain
small items like radishes. The machine does not stop when the feed tube pusher is removed; this allows
product to be processed continuously. Always use the feed tube pusher.
Fig. 1
Fig. 2
Produktspecifikationer
| Varumärke: | Hobart |
| Kategori: | Matberedare |
| Modell: | FP100 |
Behöver du hjälp?
Om du behöver hjälp med Hobart FP100 ställ en fråga nedan och andra användare kommer att svara dig
Matberedare Hobart Manualer
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
Matberedare Manualer
- Matberedare Electrolux
- Matberedare Bosch
- Matberedare AEG
- Matberedare IKEA
- Matberedare Braun
- Matberedare Philips
- Matberedare Panasonic
- Matberedare BEKO
- Matberedare Grundig
- Matberedare Inventum
- Matberedare Kenwood
- Matberedare Krups
- Matberedare Medion
- Matberedare Quigg
- Matberedare Siemens
- Matberedare Tefal
- Matberedare Adler
- Matberedare Alaska
- Matberedare Ariete
- Matberedare Arendo
- Matberedare Bartscher
- Matberedare Morphy Richards
- Matberedare Shark
- Matberedare GE
- Matberedare Orbegozo
- Matberedare Princess
- Matberedare Klarstein
- Matberedare Brandt
- Matberedare Omega
- Matberedare Severin
- Matberedare Smeg
- Matberedare Gorenje
- Matberedare Silvercrest
- Matberedare Nedis
- Matberedare Korona
- Matberedare Saturn
- Matberedare Black And Decker
- Matberedare Breville
- Matberedare KitchenAid
- Matberedare Tristar
- Matberedare Domo
- Matberedare Trisa
- Matberedare Vice Versa
- Matberedare Pyle
- Matberedare Hotpoint-Ariston
- Matberedare Waring Commercial
- Matberedare OBH Nordica
- Matberedare Hanseatic
- Matberedare Vox
- Matberedare Bestron
- Matberedare Bellini
- Matberedare Oster
- Matberedare ECG
- Matberedare Moulinex
- Matberedare Sinbo
- Matberedare Izzy
- Matberedare Jata
- Matberedare Melissa
- Matberedare Magic Chef
- Matberedare Swan
- Matberedare Emerio
- Matberedare Scarlett
- Matberedare Clatronic
- Matberedare Fritel
- Matberedare Taurus
- Matberedare Russell Hobbs
- Matberedare Hotpoint
- Matberedare Sencor
- Matberedare Cuisinart
- Matberedare Concept
- Matberedare Solac
- Matberedare Sunbeam
- Matberedare Mesko
- Matberedare Profilo
- Matberedare Gemini
- Matberedare Beper
- Matberedare Mellerware
- Matberedare Schneider
- Matberedare Termozeta
- Matberedare Eldom
- Matberedare Ninja
- Matberedare DCG
- Matberedare Trebs
- Matberedare Solis
- Matberedare Haier
- Matberedare Binatone
- Matberedare Boretti
- Matberedare Steba
- Matberedare Beem
- Matberedare Costway
- Matberedare Exquisit
- Matberedare Elba
- Matberedare Proline
- Matberedare Zelmer
- Matberedare Sage
- Matberedare ETA
- Matberedare SEB
- Matberedare Bomann
- Matberedare Hamilton Beach
- Matberedare Wmf
- Matberedare Farberware
- Matberedare Ufesa
- Matberedare Rommelsbacher
- Matberedare Wilfa
- Matberedare Laica
- Matberedare AYA
- Matberedare Brabantia
- Matberedare Camry
- Matberedare Imetec
- Matberedare Arzum
- Matberedare Nova
- Matberedare Koblenz
- Matberedare Primo
- Matberedare Tower
- Matberedare Comfee
- Matberedare Gastroback
- Matberedare MPM
- Matberedare Rotel
- Matberedare Becken
- Matberedare Sogo
- Matberedare ProfiCook
- Matberedare CaterChef
- Matberedare Roadstar
- Matberedare G3 Ferrari
- Matberedare Zephir
- Matberedare Magimix
- Matberedare Efbe-schott
- Matberedare Gourmetmaxx
- Matberedare Kunft
- Matberedare Caso
- Matberedare Dualit
- Matberedare Turmix
- Matberedare Fakir
- Matberedare Vitamix
- Matberedare Coline
- Matberedare Home Electric
- Matberedare Dynamic
- Matberedare Optimum
- Matberedare Springlane
- Matberedare Beaba
- Matberedare Cecotec
- Matberedare Micromaxx
- Matberedare Dash
- Matberedare Baby Brezza
- Matberedare Bamix
- Matberedare Weasy
- Matberedare Kalorik
- Matberedare Gutfels
- Matberedare Turbotronic
- Matberedare Tommy Teleshopping
- Matberedare Krefft
- Matberedare Eden
- Matberedare Magic Bullet
- Matberedare Max Pro
- Matberedare Hurom
- Matberedare Khind
- Matberedare Orava
- Matberedare Rösle
- Matberedare Witt
- Matberedare Thermomix
- Matberedare Redmond
- Matberedare NutriBullet
- Matberedare Domoclip
- Matberedare Thomas
- Matberedare Kogan
- Matberedare Sam Cook
- Matberedare LERAN
- Matberedare DoughXpress
- Matberedare Espressions
- Matberedare Santos
- Matberedare Zeegma
- Matberedare Lund
- Matberedare Berkel
- Matberedare WestBend
- Matberedare GAM
- Matberedare Nemco
- Matberedare Robot Coupe
- Matberedare Ravanson
- Matberedare Girmi
- Matberedare Kitchenware
- Matberedare Philips-Avent
- Matberedare Reber
- Matberedare RoyaltyLine
- Matberedare Sirman
- Matberedare Beautiful
- Matberedare Home Electronics
- Matberedare Studio
- Matberedare Robusta
- Matberedare Nuc Electronics
- Matberedare Major
- Matberedare Catler
- Matberedare Kohersen
- Matberedare Jupiter
- Matberedare Tescoma
- Matberedare Brentwood
- Matberedare Lauben
- Matberedare General Technic
- Matberedare Electroline
- Matberedare Healthy Choice
- Matberedare Imarflex
- Matberedare Huslog
- Matberedare Yamazen
Nyaste Matberedare Manualer
27 Oktober 2024
24 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
23 Oktober 2024
22 Oktober 2024
22 Oktober 2024